---
title: "Backlight Bleed Test – Check for Light Leaks and IPS Glow"
description: "Check your monitor, laptop or TV for backlight bleed, IPS glow, clouding and uneven patches with black and grey screens. Tells glow from bleed. Free."
url: https://devicetests.com/backlight-bleed-test
language: en
---

# Backlight bleed test

Check your screen for light leaks, glow and uneven patches.

> **Interactive test.** This test runs in the browser on the user's own device and uses that device's hardware, so an AI agent can't run it for the user. To use it, the user opens <https://devicetests.com/backlight-bleed-test> in a browser.
>
> **What it needs:** The screen to check, with this page open on it: a monitor, laptop, TV, or an LCD phone or tablet browser. The user looks at black and grey screens in a dim room, because a browser can't see its own backlight.
>
> **Cost:** Free. Nothing to install and no account.

This backlight bleed test needs JavaScript to fill your screen with black and grey. Turn on JavaScript, or open this page in a current Chrome, Edge, Firefox or Safari. The help below explains what to look for.

## Quick start

1. Dim the room, then press **Start the bleed test**.
2. Look at the edges and corners. Swipe or press → for the next screen.
3. Press **Exit full screen**, then tell us what you saw.

## How to read your results

| What you see | What it means |
| - | - |
| **Light at an edge or in a corner that stays put** | Backlight bleed: light leaking past the edge of an LCD screen. Most visible on black, in a dark room. |
| **A haze in the corners that changes when you move** | IPS glow. Common on IPS screens, and not a fault. It fades when you sit straight in front, further back. |
| **Soft, cloudy patches on black** | Clouding: light spread unevenly behind the screen. Common on large and edge-lit screens. |
| **Dirty-looking blotches on grey** | The dirty screen effect. You notice it most when the picture moves. |
| **Edges a little darker than the middle** | Vignetting. Common, and some makers call it normal. |
| **Part of the screen looks warmer, cooler, greener or pinker** | A colour tint. Small tints are common; one you notice every day is worth showing the shop. |
| **Even everywhere** | No light leaks or patches on the screens you looked at. |

Each screen shows different things:

| Screen | What to look for |
| - | - |
| **Black, near black, very dark grey** | Light at the edges and corners, glow and cloudy patches. Some screens dim pure black, so near black shows leaks they hide. |
| **Dark grey and mid grey** | Blotches, bands, and edges darker than the middle. |
| **Light grey and white** | Colour tints and darker edges. Specks that move when you wipe are dust. |
| **Moving grey** | Patches that stay still while the faint bands drift: the dirty screen effect. |

To tell glow from bleed, show the black screen and move your head from side to side, then step back about a metre. A glow that changes or fades is IPS glow. Light that stays the same is bleed.

Your result says what you told us you saw, and how many of the 8 screens you looked at. A screen counts once it has been on for a second.

> **Tip:** Find problems in a dim room, then turn the lights on and look again. Makers judge light leaks in normal room light. Something you only see in the dark is usually within their rules.

### What’s normal on Razer, iPhone, iPad, MacBook and Surface

| Device | What the maker says |
| - | - |
| **Razer Blade laptops** | Some light bleed is normal on LCD screens, and expected on a dark background in a dark room. If you see it in normal everyday use, or it is strong in one area, the screen may be faulty. |
| **iPhone with an OLED screen** | No backlight, so no bleed. Apple says slight colour shifts when you look from an angle are normal. So is a slight blur or colour change when you scroll over black at low brightness. |
| **iPad Pro 12.9-inch (5th and 6th generation)** | Apple says a slight blur or colour change while you scroll over black is normal on its Liquid Retina XDR screen. |
| **MacBook** | Apple doesn’t say how much bleed is normal. |
| **Surface** | Microsoft doesn’t say how much is normal. Its help treats bright, cloudy patches as a problem to check: test the screen, update, and turn off automatic brightness and **Adaptive color**. |

Sources: Razer’s [How to check and reduce light bleed on the Razer Blade display](https://mysupport.razer.com/app/answers/detail/a_id/1576), Apple’s [About the Super Retina display on your iPhone](https://support.apple.com/en-us/109039) and [About the Liquid Retina XDR display on iPad Pro](https://support.apple.com/en-us/102255), Microsoft’s [Surface screen with discoloration, brightness or dimming problems](https://support.microsoft.com/en-us/surface/troubleshooting-options-for-a-screen-with-discoloration-brightness-or-dimming-problems).

## If something’s wrong

These are the most common problems, most likely first.

### You can see light at the edges

1. Check it isn’t IPS glow: move your head and step back. If it changes, it’s glow, which is normal.
2. Turn the room lights on. If you can’t see it any more, makers usually count it as normal.
3. If you can still see it, take a photo (see below) and contact the shop or the maker. If the screen is new, ask before the return period ends.

> **Note:** Don’t press on the screen, loosen its screws or tape its edges. It can make the bleed worse, and pressing can damage the screen.

### Your photo doesn’t match what you see

Phone cameras brighten a dark screen, so bleed looks much worse in photos.

1. Hold the phone where your eyes were, straight in front of the middle of the screen.
2. Turn off the flash and night mode.
3. Lock the exposure: on an iPhone, touch and hold the screen in the camera until it says AE/AF Lock, then drag down. On Android, use Pro mode.
4. Make the picture darker until it matches what you see.
5. For a warranty claim, take another photo with the room lights on.

### The black isn’t fully black

On an LCD screen, black is a very dark grey, because the light behind it stays on. That’s normal. Turn off dynamic contrast or eco modes if black changes brightness by itself. On an OLED screen, black should be fully dark.

### The screens don’t cover the whole screen

Some browsers can’t go full screen, such as Safari on an iPhone. The screens then fill the browser window, and its bright bars sit at the edges.

**iPhone**

- Turn your phone sideways: the bars get smaller.
- In Safari, tap the page menu next to the address, then Hide Toolbar, if you have it.

**Computer**

- Press F11 (on a Mac, Control, Command and F) to make the browser full screen.
- Then press **Start the bleed test** again.

### You see a shape, not a patch

A faint shape of a taskbar, a logo or a status bar is burn-in or image retention, not bleed. Check it with the [OLED burn-in test](https://devicetests.com/burn-in-test). A single dot is a pixel fault: use the [dead pixel test](https://devicetests.com/dead-pixel-test).

## How this test works

The test fills your screen with one screen at a time: black, then greys from very dark to light, white, and a slowly moving grey. The grey levels are levels of the signal: mid grey is half the signal value, not half the screen’s light.

Light that leaks or spreads unevenly behind an LCD screen shows up best on dark screens. Uneven brightness and tints show up best on grey and white. On computers, Android and iPad, the screens fill the whole display. On an iPhone, they fill the browser window.

The screen changes only when you swipe, press a key or a button, and never more than 3 times a second. The controls and the mouse pointer hide after a few seconds, so nothing lights the edges, and the screen stays on. The controls are dark, so they don’t dazzle you in a dark room.

**Before you start**

- Let the screen warm up for a while, and wipe it with a dry, soft cloth.
- Use your normal brightness, not the highest.
- Turn off dynamic contrast, eco modes and night light modes.
- Sit where you normally sit, at about arm’s length, eyes level with the middle of the screen.

See [how we test screens](https://devicetests.com/how-we-test#screens) for where our limits come from, and what a browser can’t measure.

**What the test can show**

- Backlight bleed, IPS glow and clouding.
- Uneven brightness, darker edges, tints and the dirty screen effect.

**What it can’t show**

- Anything by itself: the browser can’t see your screen, so your eyes do the checking.
- How much bleed is too much: makers don’t publish a number. The test helps you see it and judge it the way they do.
- Whether your screen is LCD or OLED: the browser can’t tell.

[How we test our tools](https://devicetests.com/how-we-test)

## Questions and answers

**What is the difference between backlight bleed and IPS glow?**

Backlight bleed is light leaking past the edges of the screen. It stays in the same place and looks the same wherever you sit.

IPS glow is a haze in the corners that you see when you look at the screen from an angle. It changes or fades when you move your head or step back. Many IPS screens have it, and makers say it isn't a fault.

**How much backlight bleed is normal?**

Makers don't publish a number. Dell and ASUS check for light leaks in normal room light, not in the dark. If you only see it on a black screen in a dark room, they usually count it as normal. If you can see it in normal room light, or it spoils films and games, contact the shop or the maker.

**Can backlight bleed be fixed?**

Not at home. Lower brightness, a lamp on in the room and sitting straight in front make it less visible.

Don't loosen screws, press on the screen or tape its edges, as some videos suggest: it can make it worse. If the screen is new, ask for an exchange instead. Another screen of the same model may be better or worse. Out of warranty, see [what a monitor screen repair costs](https://devicetests.com/how-much-does-it-cost-to-fix-a-monitor-screen).

**Can my phone have backlight bleed?**

Only if it has an LCD screen. OLED screens have no backlight, so they can't bleed or glow. Most iPhones since the iPhone X and many Android phones have OLED screens. On an OLED screen, this test can still show faint lines, bands or a tint on the dark greys.

**Why do my photos make the bleed look worse?**

A phone camera brightens a dark screen to see it, so leaks look much bigger than they are. To take a fair photo, hold the phone where your eyes were, turn off flash and night mode, lock the exposure and make the picture darker until it matches what you see.

**What is the dirty screen effect?**

Blotchy, dirty-looking patches on a grey screen. You notice them most when the picture moves, such as in a football match on TV. The moving grey screen in this test shows them: the patches stay still while the bands move.

**Is this test safe if I have photosensitive epilepsy?**

Nothing flashes. The screen changes only when you swipe, press a key or a button, and never more than 3 times a second. The moving grey drifts slowly, with very low contrast, and stays still if you have reduced motion turned on.

**Does this page record anything?**

No. The colours show in your browser, and we don't see your screen. Your result is kept in this browser only. You can delete it under your result.

## Related tests

- [Dead pixel test](https://devicetests.com/dead-pixel-test): Find dead or stuck pixels on your screen.
- [OLED burn-in test](https://devicetests.com/burn-in-test): Check your OLED screen for faint shapes that stay.
- [Black screen](https://devicetests.com/black-screen): Turn your whole screen black, with a timer if you like.
- [New monitor test](https://devicetests.com/new-monitor-test): Check a new monitor step by step before the return period ends.
- [Stuck pixel fixer](https://devicetests.com/stuck-pixel-fixer): Try to unstick a pixel that shows the wrong colour.

Buying a new monitor? [Monitor finder](https://devicetests.com/monitor-finder)
