---
title: "Frame Skipping Test – Check Your Monitor Overclock | DeviceTests"
description: "Is your monitor really showing 75, 144 or 240 Hz? Photograph this pattern with a phone at 1/10 s. A gap is a skipped frame. Steps for iPhone and Android."
url: https://devicetests.com/frame-skipping-test
language: en
---

# Frame skipping test

Check that your monitor shows every frame, with a photo from your phone or camera.

> **Interactive test.** This test runs in the browser on the user's own device and uses that device's hardware, so an AI agent can't run it for the user. To use it, the user opens <https://devicetests.com/frame-skipping-test> in a browser.
>
> **What it needs:** The monitor to check, with this page open on the computer that drives it, plus a camera that can take a photo at about 1/10 s (a phone in Pro mode or with a manual camera app, or a real camera). The page lights one box per frame; the photo shows whether the monitor skipped any (a dark gap in the lit run), typically after overclocking. Screenshots and screen recordings can't show it, and the page can't see the photo, so the user judges it from drawn examples. An agent can't run this test for the user.
>
> **Cost:** Free. Nothing to install and no account.

This frame skipping test needs JavaScript to light one box for every frame. Turn on JavaScript, or open this page in a current Chrome, Edge, Firefox or Safari. The help below explains how to take and read the photo.

## Quick start

1. Press **Start the boxes** on the computer you're checking.
2. Press **Full screen**, and wait until the page says **Ready for a photo**.
3. Photograph the boxes with a 1/10 second shutter.
4. Pick what your photo shows, then press **Show my result**.

## How to read your photo

Your photo should show a row of lit boxes, one for every picture your screen showed while the shutter was open. At 144 Hz, a photo at 1/10 of a second lights about 14 boxes. The row may carry on at the start of the next line, like text: follow the numbers. Look at the boxes in the middle of the row.

| Your photo | What it means |
| - | - |
| **An unbroken row** | Good: no skipped frames. The boxes at each end may be dimmer, because the photo began and ended part-way through a picture. |
| **Dark boxes inside the row** | Frames are probably skipped. Here one box in five is dark, so a 75 Hz signal is shown at 60 Hz. |
| **Every other box dark** | Half of the frames are skipped. |
| **One brighter box** | One picture stayed for two refreshes, usually because the browser was late. That isn’t skipping. |
| **Only one or two boxes** | The shutter was too short, or it’s a screenshot. Use 1/10 of a second. |
| **Every box lit** | The photo took longer than the whole grid. Use 1/10 of a second. |

The first and last box of a row can also look split or slanted. Phone cameras and monitors both work from top to bottom, so that’s normal. Only dark boxes inside the row matter.

> **Tip:** Take three photos. Gaps in the same rhythm each time mean real skipping. One odd gap can be the camera or a busy computer.

**Counting** the lit and dark boxes in one stretch tells you how many pictures your monitor really shows. For example, 12 lit and 3 dark at 75 Hz means it shows about 60 a second. The tool works this out when you enter the numbers.

## If something’s wrong

These are the most common problems, most likely first.

### Dark boxes in the row after overclocking

Your monitor can’t keep up with the rate you set. Lower it in 5 Hz steps, and take a photo after each step.

**NVIDIA**

- Open **NVIDIA Control Panel**.
- Choose **Change resolution**, then **Customise**.
- Lower the custom refresh rate.

**AMD**

- Open **AMD Software**.
- Choose **Display**, then **Custom Resolutions**.
- Lower the refresh rate.

**CRU (Custom Resolution Utility)**

- Remove the resolution you added, then restart.
- Still skipping? **reset-all** removes every custom setting on every screen, then you restart.

### Dark boxes at the monitor’s normal rate

1. Use DisplayPort, or an HDMI cable labelled **Premium High Speed** or **Ultra High Speed**, plugged straight into the computer. The cable that came with the monitor is a good start. Docks, adapters and switch boxes can cause skipping.
2. Use the port the manual names for high refresh rates. Some HDMI ports stop at 60 or 120 Hz.
3. Update your graphics drivers.
4. Unplug other monitors for the test.
5. Still skipping? Contact the seller: the monitor may be faulty.

### My phone has no shutter setting

1. Look for a **Pro** or **Manual** mode in the camera app.
2. Install a free manual camera app, such as **Open Camera** on Android or **Lightroom** on iPhone. In Open Camera, first set **Camera API** to **Camera2** in its settings.
3. Still nothing? Dim the room and turn the monitor’s brightness down. Your camera then picks a longer shutter by itself. If a moon icon or **Night** mode appears, turn it off.

### The page shows a lower rate than I set

The boxes can only light as fast as your browser draws. Check your settings with the [refresh rate test](https://devicetests.com/refresh-rate-test). Close other tabs, plug in a laptop’s charger, and keep this window on the monitor you’re checking.

- **Safari** holds pages near 60 Hz by default. Use Chrome, Edge or Firefox for this test.
- **Windows laptops:** turn off **Dynamic refresh rate** in **Settings**, **System**, **Display**, **Advanced display**.
- **iPhone and iPad:** Low Power Mode lowers the rate to 30 or 60 Hz.

### The page says my browser missed a frame

Your computer was busy for a moment. Close other tabs and apps, wait for **Ready for a photo**, then take the photo again.

### The screen flickers

This test looks for skipped frames, not flicker. To find the cause of flicker, follow our guide [why is my screen flickering](https://devicetests.com/screen-flickering). It checks the cable, the refresh rate, apps and the brightness, one at a time.

## How this test works

The page lights one box on every frame your browser draws, in order. A camera photo with a shutter longer than one frame catches several of them, so it shows a row of lit boxes. If your monitor drops a frame, that box never lights, and the photo shows a dark gap.

The grid has a tenth more boxes than your screen shows pictures a second. So even a 1 second photo never goes round the grid twice, which would hide gaps. The page also times every frame, as the refresh rate test does. When the browser is late, a box stays lit twice (brighter), so the page says to wait and photograph again.

**What the test can’t tell you**

- Whether there are gaps. Only your photo shows that, and the page can’t see it.
- Where a gap comes from, for sure. A page can see when the browser was late, but not every frame the graphics card drops. Gaps in the same rhythm on every photo point to the monitor.
- Skipping at a rate your browser doesn’t draw. If it draws 60 pictures a second, only 60 Hz is checked.
- Stutter in games. That comes from the computer or the internet, not the monitor. See [game lag or stutter](https://devicetests.com/game-lag-or-stutter) to find out which.

[How we test our tools](https://devicetests.com/how-we-test)

## Questions and answers

**What is frame skipping?**

Your computer sends a number of pictures a second, for example 75 or 144. A monitor that can't keep up, often after overclocking, quietly drops some of them. It still says it runs at 75 or 144 Hz, but motion isn't as smooth as it should be.

**Why can't I use a screenshot or a screen recording?**

A screenshot copies the picture your computer sends, before the monitor shows it. Frame skipping happens inside the monitor, so only a camera pointed at the screen can see it.

**Can I use a Live Photo or Night mode?**

No. Live Photo long exposure, Night mode, Pixel Motion mode and HDR blend many short pictures into one. They can hide real gaps or add false ones. You need one photo with a slow shutter, with the flash off.

**Why does the page measure my refresh rate?**

The boxes light at the rate your browser draws. If it draws 60 pictures a second while your monitor is set to 144 Hz, the photo checks 60 Hz. The page says so, and the refresh rate test helps you fix it.

**Is overclocking a monitor safe?**

Small overclocks are common, but they're at your own risk and may shorten the monitor's life. Raise the rate in small steps, check each one with this test, and go back as soon as frames are skipped.

**Can frame skipping happen without overclocking?**

Rarely. At the rated rate it's usually the cable, the port or an adapter. Some HDMI ports can't carry high rates. If it still skips with a good DisplayPort cable at the rated rate, contact the seller.

**The boxes look blurred or doubled on my TV. Why?**

TVs often add pictures of their own (motion smoothing), which spoils the test. Turn on Game mode and turn off motion smoothing, then take the photo again.

**Does this work on a laptop, phone or TV?**

Yes, if you can photograph the screen with another camera. Laptop and phone screens are rarely overclocked, so this test matters most for desktop monitors.

## Related tests

- [Refresh rate test](https://devicetests.com/refresh-rate-test): See how many times per second your screen updates.
- [Ghosting test](https://devicetests.com/ghosting-test): See trails and halos behind moving objects, and find the best overdrive setting.
- [FPS test](https://devicetests.com/fps-test): See how smoothly your screen shows moving pictures.
- [Dead pixel test](https://devicetests.com/dead-pixel-test): Find dead or stuck pixels on your screen.
- [Stuck pixel fixer](https://devicetests.com/stuck-pixel-fixer): Try to unstick a pixel that shows the wrong colour.

Buying a new monitor? [Monitor finder](https://devicetests.com/monitor-finder)
