The Razer keyboard is a mechanical keyboard, and like every other one, it can accumulate dirt and debris. Because the Razer keyboard features backlights, this dirt and debris can easily be seen. And yes, cleaning dirt and debris from your Razer keyboard is possible. However, the question many people keep asking is how to clean it?
To clean a Razer keyboard, start by removing the keycaps to clean it properly. Next, blow the keyboard with a dust sprayer and use a cotton swab or cotton ball with rubbing alcohol to clean the keyboard. Finally, reassemble the keyboard, and you are all done.
While the Razer keyboard is durable and resistant to several things, they are not water resistant; hence, do not put the keyboard in water. Even after removing the keycap, do not put it in water because the keycap is made with plastic that is not moisture-resistant; hence, it can absorb water if soaked, which can cause them to deteriorate faster.
Keep reading to learn how to clean a Razer keyboard the proper way.
Steps To Clean a Razer Keyboard
The steps below enumerate how to clean a Razer keyboard properly.
Step #1: Remove the Keycaps
The first thing you want to do is to remove the keycaps of the Razer keyboard. Since the Razer keyboard comes with a keycap puller, you can easily use it to remove the keys. But before you start pulling out the keys, take a picture of the keyboard so you have a reference to use when coupling it back.
When you want to start pulling out the keys, ensure the keyboard is unplugged before you begin cleaning. To remove the keycaps, use the puller to pry the keys upward to dislodge them from their base. You may have to wiggle it a bit to remove it.
Step #2: Clean the Keycaps
When you remove the keycaps, put them in a plastic cup, so you don’t miss any keycaps during the cleaning process. Clean each keycap with a clean, absorbent cloth to remove dust and dirt on the keys.
Get rubbing alcohol and a cotton swab and use that to clean the interior of each keycap. It can be quite a task, so be patient while cleaning each keycap. Keep the cleaned keycap in a separate container for easy identification. After cleaning all the keycaps, keep them aside to dry properly.
Step #3: Clean the Keyboard
To clean the keyboard, use a dusting spray (a compressed air spray) to spray a high-pressure stream of air to remove dust and debris on the keyboard. Using this spray is crucial as it is gentle on the delicate electronic components of the keyboard.
It would help if you used a cotton ball to get rid of dirt on the keyboard properly. Also, you may need to use a cotton swab and rubbing alcohol to remove tough-to-reach spots on the keyboard. After cleaning the keyboard, keep it in an airy area and allow it to dry.
Step #4: Reassemble
Finally, after cleaning the keyboard, assemble the keycap you removed. Refer to the picture you took, in the beginning, to know where each keycap goes. Gently push the keycap against its proper slot. When you hear a snap, it means the keycap is in place.
Ensure you do not reattach any keycap that has not thoroughly dried, as this could damage not only the LED of the keyboard but other delicate components of the keyboard.
Not all Razer keyboards support removable keycaps. So, if your Razer keyboard is removable, ensure you remove it to clean it properly.
Conclusion
As you can see from this article, there is nothing complicated about cleaning a Razer keyboard. So, if you have been using a Razer keyboard for an extended period, it might be time to clean it. Follow the steps enumerated in this article to clean it yourself.
Frequently Asked Questions
You can soak the keycaps of your Razer keyboard in rubbing alcohol, unlike in water. But when you do, ensure you allow it to dry properly before reattaching it to the keyboard. Rubbing alcohol has been reported in several cases to have adverse effects on the electronic components of some devices.
The Razer keyboard is a mechanical keyboard; hence, it was designed to be able to handle removing its keycap. However, we recommend you do not do so too often. The more often you remove the keycap of your Razer keyboard, the slacker the keys will become, and it may end up falling off with time.
If you do not have access to a spray can, you can easily use a vacuum cleaner to plug dust and dirt out of the keyboard. But if you are going to do so, ensure you take caution not to get water or dust into the keyboard.
