How to Fix iPhone Charger

An Iphone And Its Charger Connected

Let’s admit that we keep our iPhones closer to our hearts but don’t treat the chargers nicely. We consistently throw charging cables, and most of us have lost count of how many times we plug and unplug the phone from the port. Our hearts skip a beat when we plug in the charger and don’t hear the specific tone of charging. These are common issues that iPhone users face in routine. However, we will learn how to fix it in this article.

Quick Answer

To fix an iPhone charger, you attempt the following suggestions:

1. Check the power source whether it’s working or not.
2. Fix the fray ends of the cable by using electric tape.
3. Clean the lightning port.
4. Change the power adapter or reset the phone.

This article will give complete steps about these steps on how to fix an iPhone charger.

Why Is My iPhone Charger Not Working?

There are multiple reasons for not charging the phone. For instance, you may have an uncertified charger, the charging cable may be damaged, the power source is not working, or there might be some dirt sneaked into the port of the phone. 

How to Fix an iPhone Charger

There are two components of your iPhone charger. One is an Apple power adapter that goes into the socket, and the other is the USB cable that converts lightning to the phone. You need to do a control inspection to assess if these components are working fine.

  1. Is the wall socket functional? Try to find another source or plug. Reset the tripped breaker.
  2. Make sure the light switch is on.
  3. Use a different USB cable, and fixing it into the power adapter may charge your phone.

If you have checked all these steps, and everything seems to fit, it confirms that you have to fix the iPhone charger. Here are some ways to find how to fix an iPhone charger.

Solution #1: Repair the Damaged iPhone Cable

The most common problem the users come across is the damaged iPhone cable. It wears out from the ends after some time. Here are a few tricks to fix this:

Method #1: Use of Electrical Tape

Wrapping the electrical tape around the frayed portion will help the exposed parts to come in place together and stabilize it. You can also wrap the tape over bent wire several times. It will enhance inflexibility.

Method #2: Use of Heat Shrink Tubing

It is a more sophisticated way of covering the cable without using electrical tape. It is available at various online retailers. You can fix a broken cable with heat shrink tubing by following these steps:

  1. Unplug the cable from the phone and the socket.
  2. Use a heat shrink tubing in a ratio of 3:1 that gives strength to the cable.
  3. The tube should be large enough to pass the USB port of the cable and may extend to the wear-out ends. 
  4. When the tube is at the required place, use the heat gun and direct the heat towards the shrinking tube. You’ll see the tube shrinking in its size.
  5. Once the tube shrinks, it will give strength and stability to that cable portion and prevent bending.

Solution #2: Fix the iPhone Power Adapter

If Apple’s power adapter is not working, you should not open it. To repair a broken adapter is not a piece of cake. Several wires stick together in the adapter and may damage when you fix it. 

  • Use another adapter. The USB cable is versatile and can fit into any adapter, thus charging your phone.
  • Charge your phone by connecting the cable to either laptop, TV, or another device
  • Buy a new adapter.

Solution #3: Clean the Lightning Port

There may be some dirt and debris present in your lightning port that does not allow you to connect the device. Once a month, you should clean the port to remove excessive dirt and make your phone free from charging troubles. Follow these simple hacks:

  • Try to clean the port with a toothbrush, toothpick, or any plastic tool.
  • Sometimes, only wagging the port through the cable does the job.
  • Don’t clean with any metal object or cotton swab that might get stuck in the port and cause hindrance in charging.

Solution #4: Reboot the Device

Whether you are using an iPhone, iPad, or any other device, you don’t have to find alternative methods to fix the charger or change the adapter. Sometimes, turning the device off and then turning it back on is all you need. And your phone starts charging on its own.


You have gone through different ways to fix an iPhone charger. These tricks save time and trouble buying a new charger from the Apple store. You can make your phone charge by following easy steps. 

So, would you give it a try to fix the iPhone’s charger cable? Or you’ll discard the old one? Maybe you have solutions of your own. If this information helped your iPhone charger get back to normal, let us know in the comment section below. 

Frequently Asked Questions

How do you fix an iPhone charger?

1. Remove any debris from the charging port on the device.
2. Restart the iPhone or iPod.
3. Try a different USB cable or charger.
4. Contact Apple Support.

Do iPhone chargers wear out?

Of course, any charger cord can wear out over time. If some of the wires break, the remaining cables may be insufficient to carry the charger’s standard output, leading to slower charging.

How do I clean my iPhone charger port?

Take a small toothpick or roll a paper or cotton swab into a small tip. Carefully insert the tip into the port and waggle it to leave dirt or debris. Give the port a burst of air to help remove anything. Reinsert the charging cable into the port and turn the phone back on.

Leave a Comment

Your email address will not be published. Required fields are marked *