In this article, we’ll walk you through the process of installing the Brother HL2270dw laser printer on your system without using Software Center drivers. This guide is particularly useful for Ubuntu users, but the general process can be applied to other Linux distributions as well.
It is possible to install the Brother HL2270dw laser printer without using Software Center drivers. By downloading the driver installation script, unzipping the file, and running the installation script, you can successfully install the printer. Be sure to enter the correct model name and specify the device URI according to your connection type.
Preparing for Installation
Before you begin, ensure that your printer is connected to your computer or network and is turned on. If you’re connecting the printer to your network, make sure you know its IP address.
Downloading the Driver Installation Script
Firstly, you’ll need to download the driver installation script. Open a terminal by pressing Ctrl+Alt+T. Then, run the following command:
wget https://download.brother.com/welcome/dlf006893/linux-brprinter-installer-2.2.3-1.gzIn this command, wget is a free utility for non-interactive download of files from the web. It supports HTTP, HTTPS, and FTP protocols. The URL following wget is the download link for the driver installation script.
Unzipping the Downloaded File
Next, you’ll need to unzip the downloaded file. Run the following command in the terminal:
gunzip linux-brprinter-installer-2.2.3-1.gzHere, gunzip is a utility for unzipping files compressed with the gzip compression. The file name following gunzip is the name of the file you downloaded in the previous step.
Running the Installation Script
Now, you’re ready to run the installation script. Execute the following command:
sudo bash linux-brprinter-installer-2.2.3-1In this command, sudo allows you to run the command as a superuser, bash is a shell command that interprets and executes the script, and linux-brprinter-installer-2.2.3-1 is the script you’re running.
Entering the Model Name
When prompted for the model name, enter HL2270-DW and press Enter.
Specifying the Device URI
If you are connecting the printer via USB, choose “No” when asked to specify the DeviceURI. If you are connecting via network, choose “Yes” and select the appropriate option for the Device URI.
Configuring the IP Address
If you selected network connection and were prompted to select the number of destination Device URI, choose the option that allows you to specify the IP address of the printer. Enter the permanent IP address of your printer when prompted.
Finalizing the Installation
Finally, configure your router or DNS server to ensure that the printer is always assigned the same IP address. This will prevent potential issues with the printer losing its connection to your computer or network.
Conclusion
By following the steps above, you should be able to install the Brother HL2270dw laser printer on your system without using Software Center drivers. If you encounter any issues during the installation process, refer to the Brother support website for additional assistance.
No, this guide is specifically for Ubuntu and other Linux distributions. For Windows systems, it is recommended to use the Software Center drivers provided by Brother.
You can check the connection status of your printer by going to the "Printers & Scanners" or "Devices and Printers" section in your system settings. If your printer is listed there, it is connected to your computer.
While this guide focuses on the Brother HL2270dw laser printer, the general process can be applied to other Brother printer models as well. However, make sure to download the specific driver installation script for your printer model from the Brother support website.
If you encounter any issues during the installation process, refer to the Brother support website for additional assistance. They provide detailed troubleshooting steps and support for their products.
Yes, you need to have administrative privileges to run the installation script. The sudo command in the installation command allows you to run the script as a superuser, which is required for the installation process.
