Software & AppsOperating SystemLinux

Installing Ubuntu on ROG GL552VW: Tips for Beginners

Ubuntu 9

In this article, we will walk you through the process of installing Ubuntu on your ROG GL552VW. This guide is designed for beginners, so we’ll explain each step in detail. We’ll also provide some tips to help you troubleshoot common issues that might arise during the installation process.

Quick Answer

Installing Ubuntu on ROG GL552VW can be done by following a few steps. First, ensure that your system meets the minimum requirements for Ubuntu. Then, download the Ubuntu ISO file and create a bootable USB drive. During installation, add specific boot parameters to ensure a smooth process. After installation, add the same boot parameters to the GRUB configuration file and remove any outdated drivers. Install the latest Nvidia driver and test your system to ensure everything is functioning properly. Seek help from the Ubuntu community if needed.

Preparing for Installation

Before you begin, it’s important to ensure that your system meets the minimum requirements for Ubuntu. These include a 2 GHz dual-core processor, 4 GB of RAM, and 25 GB of hard-drive space. If your system meets these requirements, you can proceed to the next step.

Next, you’ll need to download the Ubuntu ISO file from the official Ubuntu website. Once the download is complete, create a bootable USB drive. This will allow you to install Ubuntu on your system.

Boot Parameters

When installing Ubuntu on ROG GL552VW, you’ll need to add some boot parameters. These parameters are necessary to ensure a smooth installation process. To add these parameters, edit the installation command and add the following before the “—” part:

nouveau.modeset=0 tpm_tis.interrupts=0 acpi_osi=! acpi_backlight=native i915.preliminary_hw_support=1 idle=nomwait

Here’s what each parameter does:

  • nouveau.modeset=0: Disables the Nouveau graphics driver, which can cause issues with Nvidia graphics cards.
  • tpm_tis.interrupts=0: Fixes issues with the Trusted Platform Module (TPM), a security device.
  • acpi_osi=!: Disables the operating system’s interface with the ACPI firmware.
  • acpi_backlight=native: Fixes issues with the backlight control.
  • i915.preliminary_hw_support=1: Enables preliminary hardware support for Intel graphics.
  • idle=nomwait: Fixes issues with the CPU idle state.

Post-Installation Steps

After installing Ubuntu, you’ll need to add the same boot parameters to the GRUB configuration file. To do this, edit the /etc/default/grub file and add the parameters. This will allow your system to boot properly.

Next, remove any outdated Bumblebee and Nvidia drivers. This can be done by running the following command:

sudo apt-get purge bumblebee nvidia*

This command removes any installed Bumblebee and Nvidia drivers, which can cause conflicts.

Installing Nvidia Drivers

Once you’ve removed the outdated drivers, you can install the latest Nvidia driver from the repository. To do this, run the following command:

sudo apt-get install nvidia-352

This command installs the Nvidia 352 driver, which includes nvidia-prime for managing your GPUs. You can use the nvidia-settings application to control your GPUs.

Testing Your System

After installing the Nvidia drivers, it’s important to test your system to ensure everything is functioning properly. You can use the additional drivers application, which is preinstalled in Ubuntu, to check the current driver in use.

If you encounter any issues, you can use the recovery mode to access your Ubuntu system and run the necessary commands.

Conclusion

By following these steps, you should be able to successfully install Ubuntu on your ROG GL552VW. While the process might seem complicated, it’s fairly straightforward once you understand what each step does. If you encounter any issues, don’t hesitate to seek help from the Ubuntu community. They’re always willing to lend a hand to newcomers.

Can I install Ubuntu on my ROG GL552VW if it doesn’t meet the minimum requirements?

It is recommended to have a system that meets the minimum requirements for Ubuntu. If your system does not meet these requirements, you may encounter performance issues or compatibility problems.

How do I create a bootable USB drive for Ubuntu?

To create a bootable USB drive for Ubuntu, you can use software like Rufus (for Windows) or Etcher (for Mac and Linux). Simply select the downloaded Ubuntu ISO file and the USB drive, and follow the instructions to create the bootable USB drive.

What should I do if the installation process freezes or crashes?

If the installation process freezes or crashes, you can try rebooting your system and starting the installation process again. If the issue persists, you can check the integrity of the Ubuntu ISO file by verifying its checksum or try using a different USB drive for the installation.

How do I access the GRUB configuration file?

To access the GRUB configuration file, you can open a terminal and run the command sudo nano /etc/default/grub. This will open the file in the nano text editor, where you can make the necessary changes.

How can I test if the Nvidia drivers are working correctly?

You can test if the Nvidia drivers are working correctly by opening the Nvidia X Server Settings application. If the application opens without any errors and displays information about your Nvidia GPU, then the drivers are working properly.

Where can I find help if I encounter issues during the installation process?

If you encounter issues during the installation process, you can seek help from the Ubuntu community. You can visit the Ubuntu Forums, ask questions on Ask Ubuntu, or join the Ubuntu IRC channels for live assistance.

Leave a Comment

Your email address will not be published. Required fields are marked *