---
title: "Mic Test – Check Your Microphone Online, With Playback"
description: "Check that your microphone works in your browser. See a live level meter, record and hear your voice, and get fixes for a silent, quiet or blocked mic."
url: https://devicetests.com/mic-test
language: en
---

# Mic test

Check that your microphone works and hear how you sound.

> **Interactive test.** This test runs in the browser on the user's own device and uses that device's hardware, so an AI agent can't run it for the user. To use it, the user opens <https://devicetests.com/mic-test> in a browser.
>
> **What it needs:** A microphone on the device: built in, a headset, USB or Bluetooth. The user allows the browser to use it, then speaks. The sound is checked in the browser and is never uploaded.
>
> **Cost:** Free. Nothing to install and no account.

Your voice stays on your device. We don't upload or keep it.

This mic test needs JavaScript to listen to your microphone. Turn on JavaScript, or open this page in a current Chrome, Edge, Firefox or Safari.

## Quick start

1. Press **Start microphone test**, then choose **Allow**.
2. Speak, or count to five, and watch the meter.
3. Press **Stop test** to see your result.

## How to read your results

While the test listens, the sound picture moves with every sound. The meter shows how loud the sound is, in a word and in dBFS (decibels below the loudest your microphone can record). Above them, the test says what it hears.

| What you see | What it means |
| - | - |
| **Your microphone works** | Sound reached the microphone, well above the background. |
| **Very quiet** | Your voice reached the microphone, but only just. Others may not hear you well. |
| **No voice yet** | The microphone is on and sends sound, but nothing louder than the background. |
| **No sound at all** | The microphone sends only silence. It is muted, turned off or turned down to zero. |
| **Too loud** on the meter | Your voice reached the top of what the microphone can record. It may sound distorted. |

When you press **Stop test**, your result shows under the test. It says in words what we found, with the level of your voice and of the background. It also lists what to do next.

**Hear yourself:** press **Record my voice**, say a few words, then press **Stop recording** and **Play recording**. This is close to what others hear in a call, though some apps process the sound differently. Listen for hiss, crackle or a muffled sound.

> **Tip:** Speak at your normal volume, as if you were on a call. With a laptop, sit about an arm’s length away. With a headset, keep the microphone near your mouth.

## If something’s wrong

These are the most common problems, most likely first.

### Your microphone is blocked

The browser asked to use your microphone, and the answer was no, or a setting blocks it. The test shows the steps for your browser. In short:

1. Click the lock or settings icon next to the address bar.
2. Set **Microphone** to **Allow**.
3. Press **Try again**.

If it is still blocked, your system may block the browser:

**Windows**

- Open Settings, then Privacy and security, then Microphone.
- Turn on Microphone access, and Let desktop apps access your microphone.

**Mac**

- Open System Settings, then Privacy and Security, then Microphone.
- Turn on your browser in the list, then restart the browser.

### No sound at all

1. Check the mute button or switch on your headset or microphone.
2. Turn up the input volume of your microphone in the system settings.
3. Unplug the microphone and plug it in again, or try another port. Still nothing? See “Your microphone may be broken” below.
4. A headset with one plug needs a headset jack on your PC. See [how to use a single-jack headset](https://devicetests.com/how-to-use-a-single-jack-headset-on-pc-without-splitter).

**Windows**

- Open Settings, then System, then Sound.
- Under Input, choose your microphone and raise its Volume.

**Mac**

- Open System Settings, then Sound, then Input.
- Choose your microphone and move Input volume up.

On Android 12 or later, swipe down from the top of the screen and check that Microphone access is on.

Still no sound? Follow the steps in [Microphone not working](https://devicetests.com/microphone-not-working), one fix at a time.

### The test listens to the wrong microphone

Choose your microphone in the **Microphone** list while the test runs. If it isn’t there, check that it is plugged in or connected. On Windows and a Mac, also choose it as the input in the Sound settings above.

### Others can’t hear you in Zoom, Teams or Discord

If the test hears you, your microphone works. The app may use another microphone, or block it.

1. Open the app’s audio or voice settings. Choose the same microphone as in the **Microphone** list here.
2. Check that you are not muted in the app.
3. On Windows and a Mac, check that the app may use the microphone in the privacy settings above.

For the steps in each app, see [camera or mic not working in calls](https://devicetests.com/camera-mic-not-working-in-calls).

### People hear an echo of themselves

Your speakers play their voices, and your microphone picks it up again. Use headphones, or turn your speakers down. If you hear yourself instead, see [whose echo it is](https://devicetests.com/hearing-yourself-on-a-call).

### Your voice is very quiet

1. Move closer to the microphone.
2. Raise the input volume in the system settings. On Windows, some microphones also have a **Microphone Boost** setting. See [how to use Microphone Boost](https://devicetests.com/how-to-bass-boost-your-microphone).
3. Check that nothing covers the microphone, such as a phone case or your hand. Not sure where your laptop’s microphone is? It is often at the top, next to the camera. See [where the microphone is on a laptop](https://devicetests.com/where-is-the-microphone-on-my-laptop).

### “Your microphone is busy”

Another app is using the microphone, or it didn’t start. Close apps such as Zoom, Teams, Discord or a voice recorder. Close other browser tabs that use the microphone. Then press **Try again**.

Not sure which app has it? See [which app is using your microphone](https://devicetests.com/camera-light-on).

### The microphone stopped during the test

It may have been unplugged, or a Bluetooth headset went to sleep or out of range. A phone call also takes over the microphone. Connect it again and press **Try again**.

If it’s plugged into a USB hub or dock, plug it straight into the computer. See [USB hub keeps disconnecting](https://devicetests.com/usb-hub-disconnecting).

### Your microphone may be broken

Before you replace a microphone, rule out the settings and the cable:

1. Try it on another computer or phone. If it works there, the microphone is fine and the problem is a setting or a driver on the first device. [The swap test](https://devicetests.com/device-computer-or-app) shows what to swap, in order.
2. Try another cable, port or adapter. A loose plug or a damaged cable causes many “broken” microphones.
3. Check the mute switch or button on the microphone, headset or cable.

If one of these problems follows the microphone to every device you try, the microphone itself is probably damaged. A loose wire can also come and go:

- **No sound at all**, even though the test shows your microphone’s name (that only means the computer sees it, not that it picks up sound).
- **Crackling or cutting out** when you move or bend the cable.
- **Constant buzzing or hiss**, even in a quiet room with the input volume at a normal level.
- **Muffled or distorted sound** that a cleaner mesh, a new cable or another port doesn’t fix.

Look at the microphone too. Dents, a torn mesh, a loose plug, liquid marks or corrosion are signs of damage. To measure hiss, hum and distortion, record with the [microphone quality test](https://devicetests.com/mic-quality-test). A broken microphone usually can’t be fixed at home. If it is under warranty, contact the maker. Before you buy a new one, try every fix in [Microphone not working](https://devicetests.com/microphone-not-working).

### Your AirPods microphone doesn’t work

1. Charge them. Put both AirPods in the case and close the lid for 15 seconds. Then put them back in your ears.
2. Check which AirPod listens. On an iPhone or iPad, open **Settings**, tap the name of your AirPods, then **Microphone**. If you don’t see it, tap **Audio & Routing** first. Choose **Automatically Switch AirPods**. With **Always Left AirPod** or **Always Right AirPod**, that AirPod stays the microphone, even in its case. On a Mac, the same setting is in **System Settings**, under the name of your AirPods.
3. Clean the microphone meshes the way Apple shows for [AirPods](https://support.apple.com/en-us/102672) and [AirPods Pro](https://support.apple.com/en-us/120409). Apple uses a soft children’s toothbrush dipped in micellar water, then in distilled water. Let them dry for at least two hours. Don’t use anything sharp.
4. On a computer, choose your AirPods as the microphone. See “The test listens to the wrong microphone” above.
5. Update them. AirPods update by themselves while they charge in the closed case, near your iPhone, iPad or Mac on Wi-Fi. This can take 30 minutes.
6. Try them with another phone or computer. If the microphone fails everywhere, [reset your AirPods](https://devicetests.com/headphone-test#one-bluetooth-earbud-or-side-doesnt-play) and pair them again. Still nothing? Follow [AirPods mic not working](https://devicetests.com/airpods-mic-not-working), then contact Apple.

**On Windows, sound gets flat and quiet while the microphone is on.** AirPods then switch to a call mode, called Hands-Free, which can’t send good sound both ways at once. That is normal. For better sound, use another microphone and keep your AirPods for listening.

### Problems on iPhone or iPad

1. Open Settings, then Safari (or your browser), then Microphone, and choose Ask or Allow.
2. End any phone or video call. Other apps can hold on to the microphone.
3. Take off a case that may cover the microphone holes.

More fixes for iPhone and iPad are in [Microphone not working](https://devicetests.com/microphone-not-working#iphone-or-ipad).

> **Note:** On iPhone and iPad, a recording can sound quiet while the test still listens. Press **Stop test**, then play it again under your result.

## How this test works

When you press **Start microphone test**, your browser asks to use your microphone. If you allow it, the test reads the sound inside your browser many times a second. The sound is never sent to us.

The test says your microphone works only when it hears real sound, such as your voice. A sound must be at least 10 dB louder than the background, and louder than −50 dBFS, for at least 0.4 seconds in total. The background is the level of the quiet moments, such as the pauses between your words. A muted microphone usually sends exact silence, so the test can tell it apart from a quiet room. The test can’t tell your voice from other sounds, such as music: to check how you sound, record your voice and play it back.

**Hear yourself** uses your browser’s own recorder. The recording stays in the memory of this browser tab and is never uploaded.

See [how we test microphones](https://devicetests.com/how-we-test#sound-microphones-and-cameras) for where our limits come from, and what a browser can’t measure.

**What the test can check**

- That your microphone sends sound, and that your voice reaches it.
- A muted microphone, a very quiet one and one that is too loud.
- How loud the background is, compared with your voice.

**What it can’t check**

- How loud your room is in decibels. dBFS is relative to the microphone, not to the room.
- How good your microphone sounds, and why. The [microphone quality test](https://devicetests.com/mic-quality-test) measures that.
- Which microphone another app, such as Zoom, will use.

Most browsers clean up the sound before the test hears it, as they do for calls. They lower background noise and even out the volume. So the levels are estimates, and they show what others hear in a call.

[How we test our tools](https://devicetests.com/how-we-test)

## Questions and answers

**Is my voice recorded or uploaded?**

No upload, ever. The test measures the sound inside your browser, on your device.

If you press **Record my voice**, the recording is kept in this browser tab only. It is gone when you close or leave the page. Nobody else can hear it.

**Why does it say "No voice yet" while I'm speaking?**

The test hears sound, but nothing louder than the background. You may be too far away, or the test listens to another microphone than the one you speak into. Move closer. If the test shows a **Microphone** list, choose the microphone you speak into.

**How do I test my AirPods microphone?**

Connect your AirPods, put them in your ears, then press **Start microphone test** and speak.

**iPhone or iPad:** the AirPods are used by themselves. The test shows the name of the microphone it listens to.

**Mac or Windows:** choose your AirPods in the **Microphone** list. On Windows they may be called **Headset** or **Hands-Free**.

**Android:** connect them in the Bluetooth settings first.

Then press **Record my voice** and play it back to hear how you sound. Other Bluetooth headphones work the same way.

Many Bluetooth headphones switch to a call mode when their microphone is on. The sound then gets quieter and duller. That is normal. To keep good sound on calls, see [Bluetooth headphones sound bad on calls](https://devicetests.com/bluetooth-headphones-sound-bad-on-calls). Mic not working? See "Your AirPods microphone doesn't work" under "If something's wrong", or our guide [AirPods mic not working](https://devicetests.com/airpods-mic-not-working).

**Why can't I choose a microphone on my iPhone?**

On iPhone and iPad, the system picks the microphone, usually a connected headset first. The test shows the name of the microphone it listens to. To test the built-in microphone, unplug the headset or turn off Bluetooth.

**Can I hear my recording through other speakers or headphones?**

Yes, in most browsers on a computer. After you record, choose them in the **Play through** list under **Play recording**. Firefox shows a **Choose speakers** button instead. On iPhones, iPads and Android phones, the recording plays through the system's sound output. Change it in your device's sound settings.

**Why does the browser ask for permission every time?**

Some browsers, such as Safari and Firefox, ask again on each visit unless you choose to remember the answer. That keeps your microphone private. Choose **Allow** each time, or allow this site for good in the browser's settings.

**What does dBFS mean?**

dBFS means decibels below full scale. 0 dBFS is the loudest sound your microphone can record. Lower numbers, such as −40 dBFS, are quieter. A clear voice is often between −30 and −10 dBFS. It is not the loudness in the room, which a browser can't measure.

**Does this test tell me how good my microphone sounds?**

Only roughly. This test checks that your microphone works and that your voice reaches it. To find out why it sounds bad, use the microphone quality test. It measures background noise, hiss, hum and distortion, and compares two microphones.

## Related tests

- [Microphone quality test](https://devicetests.com/mic-quality-test): Find out how good your microphone sounds, and why it sounds bad.
- [Sound test](https://devicetests.com/sound-test): Check your speakers, left and right, and stereo.
- [Webcam test](https://devicetests.com/webcam-test): Check that your camera works and see its picture.
- [Keyboard tester](https://devicetests.com/keyboard-tester): Check that every key on your keyboard works.
- [Mouse test](https://devicetests.com/mouse-test): Check your mouse buttons, scroll wheel and double-click.

Buying a microphone? [Microphone finder](https://devicetests.com/microphone-finder)

## Guides for this test

- [Microphone Not Working? How to Fix It on PC, Mac or iPhone](https://devicetests.com/microphone-not-working): Mic not working? Test it in 10 seconds, then follow the fix for what you see: no sound, the wrong mic, a headset plug, too quiet, or an iPhone mic.
- [Where Is the Microphone on My Laptop? (Dell, HP, Lenovo, Mac and More)](https://devicetests.com/where-is-the-microphone-on-my-laptop): On most laptops the microphone is one or two tiny holes next to the camera above the screen. Where to find it on Dell, HP, Lenovo, MacBook and Chromebook.
- [How To Boost Your Microphone: Mic Boost and Bass Boost (Windows, Mac, Discord)](https://devicetests.com/how-to-bass-boost-your-microphone): What Microphone Boost does and how to turn it on in Windows, plus honest ways to give your mic more bass on a PC, a Mac and in Discord, with what works.
