---
title: "Refresh Rate Test – Check Your Monitor’s Hz Online | DeviceTests"
description: "Check your screen’s refresh rate in 3 seconds. See if it really runs at 60, 120, 144, 240 Hz or more, and how to fix it when it runs slower than it should."
url: https://devicetests.com/refresh-rate-test
language: en
---

# Refresh rate test

See how many times a second your screen updates.

> **Interactive test.** This test runs in the browser on the user's own device and uses that device's hardware, so an AI agent can't run it for the user. To use it, the user opens <https://devicetests.com/refresh-rate-test> in a browser.
>
> **What it needs:** The screen to check, with this page open on it: a monitor, laptop, phone, tablet or TV browser. The page counts how often the user's own browser draws a new frame for about 3 seconds, so an agent can't measure the user's screen for them.
>
> **Cost:** Free. Nothing to install and no account.

This refresh rate test needs JavaScript to count your screen’s frames. Turn on JavaScript, or open this page in a current Chrome, Edge, Firefox or Safari.

## Quick start

1. Open this page on the screen you want to check.
2. Press **Measure refresh rate** and wait about 3 seconds.
3. Read your refresh rate and what to do next under the test.

## How to read your results

While the test runs, a block glides across the screen of the monitor drawing. The outlines behind the block show where it was on the last few frames; an orange outline is a skipped frame. The big number is the refresh rate from the newest frames. After about 3 seconds, your result shows under the test: your rate in words, how steady the frames came, and what to do next.

| Your result | What it means |
| - | - |
| **24, 25 or 30 Hz** | Low. Used by some TVs and projectors, by 4K screens on older cables, and by power saving modes. Motion looks jerky. |
| **48 or 50 Hz** | A rate TVs and projectors use for films and TV. |
| **60 Hz** | The usual rate of most monitors, laptops, phones and tablets. |
| **75 to 100 Hz** | A little smoother. Some office monitors, phones and VR headsets run at these rates. |
| **120 Hz** | Smooth. Common on newer phones, tablets, laptops and TVs. |
| **144 to 180 Hz** | A gaming monitor rate. Motion looks very smooth. |
| **240 Hz or more** | A fast esports monitor. |
| **About 110 Hz** (a rate between the usual ones) | Variable refresh rate, power saving or a custom setting. |
| **Changed between two rates** | Variable refresh rate (G-Sync, FreeSync, ProMotion) or a busy computer. |

**Time between frames** is how long each picture stays on the screen, in milliseconds (ms). It is 16.67 ms at 60 Hz and 6.94 ms at 144 Hz.

**Steadiness** tells you if the frames came at an even pace. A skipped frame is a refresh where the page didn’t draw in time, often because the computer was busy. A few are normal. Many skipped frames make the reading less sure, so measure again.

> **Tip:** Know what your screen should do? Pick it under **Your screen’s top refresh rate**. The result then says if your screen reaches it.

### How to change your refresh rate

**Windows 11**

1. Open **Start**, then **Settings**, **System** and **Display**.
2. Choose **Advanced display**.
3. Pick the highest rate next to **Choose a refresh rate**.

**Windows 10**

1. Open **Start**, then **Settings**, **System** and **Display**.
2. Choose **Advanced display settings**. With two screens, pick one under **Choose display**.
3. Pick the highest rate under **Refresh rate**.

**Mac**

1. Open the Apple menu, then **System Settings** and **Displays**.
2. Pick a rate in the **Refresh rate** menu.
3. On a 14- or 16-inch MacBook Pro with Apple silicon, choose **ProMotion**.

Then press **Measure again** to check it.

- **Windows:** a rate marked with an asterisk (\*) doesn’t work at the resolution you use now.
- **Mac:** not every Mac or screen shows the menu. Apple lets you pick a rate on the 14- and 16-inch MacBook Pro and its XDR displays. Other screens with Adaptive Sync show **Variable** or **Adaptive**. A rate that is too high for the screen can make it go black.

Sources: Microsoft’s [Change the refresh rate on your monitor](https://support.microsoft.com/en-us/windows/change-the-refresh-rate-on-your-monitor-in-windows-c8ea729e-0678-015c-c415-f806f04aae5a), Apple’s [Change the refresh rate on your MacBook Pro or Apple display](https://support.apple.com/en-us/102297) and [Displays settings on Mac](https://support.apple.com/guide/mac-help/displays-settings-on-mac-mh40768/mac).

## If something’s wrong

These are the most common problems, most likely first.

### Your screen runs at 60 Hz, but it can do more

New screens often start at 60 Hz. Choose the higher rate in your settings, as shown in [How to change your refresh rate](https://devicetests.com/refresh-rate-test#how-to-change-your-refresh-rate) above. Then press **Measure again**.

### The cable or port holds it back

1. Use DisplayPort, or HDMI 2.0 or newer, with a cable made for it. HDMI 1.4 can carry 1080p at 120 Hz, but it holds 1440p screens at about 75 Hz and 4K screens at 30 Hz. The monitor’s manual says which port gives its top rate.
2. On a desktop PC, plug the screen into the graphics card, not into the port next to the USB ports.
3. Leave out adapters and docks while you test. Many of them stop at 60 Hz.

Using a TV? See [the right port and cable for a TV](https://devicetests.com/tv-as-monitor#use-the-right-port-and-cable).

### The monitor needs a setting of its own

Open the monitor’s menu with the buttons on the monitor. Some monitors reach their top rate only with a setting such as **Overclock** turned on, or only on one of their ports.

### Your graphics card limits the rate

Open your graphics card’s app: NVIDIA Control Panel (**Change resolution**) or Intel Graphics Command Center (**Display**). Pick the highest refresh rate there. With an AMD card, use the Windows setting above.

### A laptop runs slower on battery

Many laptops lower the refresh rate on battery. Plug in the charger and turn off battery saver (Windows) or Low Power Mode (Mac). In Chrome and Edge, **Energy saver** or **Efficiency mode** can slow web pages down to 30 frames a second.

### An iPhone, iPad or Android phone shows 60 Hz or 30 Hz

**iPhone and iPad**

- Turn off Low Power Mode.
- In **Settings**, **Accessibility**, **Motion**, turn off **Limit Frame Rate**.
- Web pages may still run at 60 Hz on a 120 Hz ProMotion screen.

**Android**

- Turn off Battery saver or Power saving.
- In **Settings**, **Display**, pick the highest **Motion smoothness**, **Smooth display** or **Refresh rate**.

### The result says your browser is slowing the page down

Browsers slow down pages that are in the background, covered by another window or in power saving mode. Keep this window in front and on screen, turn off power saving, then press **Measure again**.

### The rate changes, or each run gives a different result

With G-Sync, FreeSync or Adaptive Sync turned on, the screen follows how fast the computer draws, so its rate can change. A busy computer can also skip frames. Close other tabs, videos and games, then press **Measure again**. The top of the range is the fastest rate in that test, not always your screen’s highest.

### You have two screens

The test measures the screen this window is on. Drag the window onto the other screen and press **Measure again**. If both screens show the lower rate, check that they aren’t set to **Duplicate** (mirror): then both run at the slower rate. Some browsers keep the first screen’s rate until you reload the page.

### The screen flickers

This test measures the refresh rate, not flicker. To find the cause of flicker, follow our guide [why is my screen flickering](https://devicetests.com/screen-flickering). It checks the cable, the refresh rate, apps and the brightness, one at a time. If the whole screen freezes or goes black, [restart the graphics driver](https://devicetests.com/how-to-refresh-a-computer-screen).

## How this test works

Your browser draws a page each time your screen refreshes, and it tells the page the time of each frame. The test notes those times for 3 seconds. It leaves out the first few frames, because the page is often busy then, and any time the page is in the background.

The time between frames gives the rate. We take the middle value (the median), so a few late frames don’t pull it down. Then we average the frames near that value, because some browsers round times to whole milliseconds. A result within 2.5% of a usual rate, like 59.94 Hz, is that rate (60 Hz). Anything else is shown as “about”, with the usual rates on either side.

Frames that come about two or three times later than usual are skipped frames. Many skipped frames make the result unsteady. Gaps that don’t fit any steady rate show that the rate changed during the test.

See [how we test screens](https://devicetests.com/how-we-test#screens) for where our limits come from, and what a browser can’t measure.

**What the test can’t tell you**

- The highest rate your screen supports. It measures the rate it runs at right now.
- The frame rate in your games. Use the game’s own counter, or the overlay in the NVIDIA app, AMD Software or Steam.
- Response time, motion blur or input lag.

[How we test our tools](https://devicetests.com/how-we-test)

## Questions and answers

**What is a refresh rate?**

It is how many times a second your screen draws a new picture. It is measured in hertz (Hz), which means times per second. A 60 Hz screen draws 60 pictures a second, one every 16.7 milliseconds. A 144 Hz screen draws one every 6.9 milliseconds.

A higher rate makes moving things look smoother, like the mouse pointer, scrolling text and games.

**What is a good refresh rate?**

For everyday use, 60 Hz is fine. 90 or 120 Hz feels smoother when you scroll, and many newer phones, tablets and laptops have it. For games, 144 Hz or more is common, and fast esports monitors run at 240 Hz or more.

**How do I check if my monitor is running at 144 Hz?**

Open this page on that monitor and press **Measure refresh rate**. If it shows 144 Hz, your monitor runs at 144 Hz right now.

You can also look in your settings. On Windows 11, open **Settings**, **System**, **Display**, then **Advanced display**: the current rate is under **Choose a refresh rate**. On a Mac, open **System Settings**, then **Displays**, and look at **Refresh rate**. If you see 60 Hz there, pick 144 Hz from the list.

**Why does my 144 Hz monitor show 60 Hz?**

Usually because of a setting, the cable or power saving. Windows and Macs often start a new monitor at 60 Hz. An old HDMI cable or port can also hold it back. The steps under **If something's wrong** show how to fix each one.

**Is the refresh rate the same as FPS?**

No. The refresh rate is how often your screen draws a new picture. FPS (frames per second) is how many new pictures your computer or game makes. You only see as many frames as your screen can show: a game at 200 FPS on a 60 Hz screen still shows 60 pictures a second. When the two don't match, the picture can split into two halves: see [screen tearing](https://devicetests.com/screen-tearing). To make your graphics card work less, set the game's frame limit to your refresh rate: see [how to lower GPU usage](https://devicetests.com/how-to-lower-gpu-usage).

**Why does my iPhone or iPad show 60 Hz?**

Many iPhones and iPads have 60 Hz screens. ProMotion models can go up to 120 Hz, but they lower the rate to save power, and web pages may run at 60 Hz. Low Power Mode and **Limit Frame Rate** (in Settings, Accessibility, Motion) also hold the screen at 60 Hz.

**Why do I get a different result each time?**

With G-Sync, FreeSync, Adaptive Sync or ProMotion, the screen changes its rate to match what is shown, so a page can see different rates. A busy computer or power saving can also slow the page down. Close other tabs and press **Measure again**.

**How do I check a second monitor?**

Drag this browser window onto the other screen, then press **Measure again**. The test measures the screen the window is on. If the rate doesn't change, reload the page on that screen.

## Related tests

- [Dead pixel test](https://devicetests.com/dead-pixel-test): Find dead or stuck pixels on your screen.
- [Stuck pixel fixer](https://devicetests.com/stuck-pixel-fixer): Try to unstick a pixel that shows the wrong colour.
- [FPS test](https://devicetests.com/fps-test): See how smoothly your screen shows moving pictures.
- [Ghosting test](https://devicetests.com/ghosting-test): See trails and halos behind moving objects, and find the best overdrive setting.
- [Frame skipping test](https://devicetests.com/frame-skipping-test): Check with a phone photo that your monitor shows every frame.

Buying a new monitor? [Monitor finder](https://devicetests.com/monitor-finder)

## Guides for this test

- [Why Is My Screen Flickering? How to Find the Cause and Stop It](https://devicetests.com/screen-flickering): Monitor, laptop or phone screen flickering? Find out if it's the cable, the refresh rate, an app or the brightness, and follow the fix for what you see.
- [Game Lag or Stutter? How to Tell If It's Your Internet or Your Computer](https://devicetests.com/game-lag-or-stutter): Choppy picture, or players teleporting? See both side by side, run one quick check, and find out whether to fix your internet or your computer first.
- [Set Up a New Monitor: Cable, Resolution, Scale, Refresh Rate, HDR and Overdrive](https://devicetests.com/new-monitor-setup): Your new monitor works, but looks small, soft or slow? Set the cable, resolution, scale, refresh rate, HDR and overdrive in the right order, then check each one.
