---
title: "Second Monitor Not Detected? Fixes for Windows and Mac"
description: "Second monitor not detected? Check what your computer sees in 1 minute, then fix the input, cable, USB-C port, settings, display limit or driver, in that order."
url: https://devicetests.com/second-monitor-not-detected
language: en
---

# Second Monitor Not Detected? How to Fix It on Windows and Mac

By Eric Buchanan · Published November 5, 2026

Short answer

Most often the monitor is set to the wrong input, or the cable or adapter carries no picture. Pick the right input with the monitor’s buttons and plug the cable straight into the computer. Then press Windows + P and choose **Extend**. On a Mac, hold Option in Displays settings and click **Detect Displays**.

This page is for a monitor that shows nothing at all. If the picture is there but has lines, see [lines on the screen](https://devicetests.com/lines-on-screen). If the laptop’s own screen is black too, see [computer on but screen black](https://devicetests.com/computer-on-screen-black).

## Step 1: see what your computer finds

Test it now

Multi-monitor test

In Chrome or Edge, it says how many screens your computer is using right now. If it says one, the computer either doesn’t see the second monitor or shows the same picture on both.

[Open the multi-monitor test](https://devicetests.com/multi-monitor-test)

![The multi-monitor test before you allow it: 'Your computer is using one screen. If you connected another one, it is not detected, or it shows the same picture (mirrored).' Below are the buttons Show my screens and Check without allowing.](https://devicetests.com/_astro/multi-monitor-one-screen.Bsbsi_ax_1M5eSE.webp)

Our test on a computer with one screen. Press Show my screens and choose Allow to list each screen; Show test pattern next to each one tells you which is which.

What do you see?

- [The monitor says "No signal" or "No input"](https://devicetests.com/second-monitor-not-detected#1-check-the-input-and-power): The input, cable or port
- [The monitor stays black and shows no message at all](https://devicetests.com/second-monitor-not-detected#1-check-the-input-and-power): Power, then try it on another computer
- [Both screens show the same picture](https://devicetests.com/second-monitor-not-detected#3-make-the-computer-look-again): Switch to Extend
- [One monitor works, the next one stays dark](https://devicetests.com/second-monitor-not-detected#4-check-how-many-screens-your-computer-supports): Your computer’s display limit
- [It worked until an update](https://devicetests.com/second-monitor-not-detected#6-update-or-roll-back-the-graphics-driver): The graphics driver

## Where the picture can stop

_A laptop with a picture, connected through a small adapter and a cable to a monitor with a blank screen. The laptop's port, the adapter, the cable and the monitor's buttons are marked._

1. The computer’s port: not every USB-C port carries a picture.
2. An adapter, hub or dock: leave it out while you test.
3. The cable: swap it for one you know works.
4. The monitor’s buttons: power, and the input (Source) it listens to.

Work along the path. Test again after each change, so you know which one fixed it.

## 1. Check the input and power

1. Check that the monitor is plugged in and turned on.
2. Press the monitor’s **Input** or **Source** button, and pick the port your cable is in, such as **HDMI 1** or **DisplayPort**.
3. Unplug the video cable while the monitor is on. Many monitors then show a message such as “No signal”. If yours shows nothing at all, even its menu, see [when it’s the monitor](https://devicetests.com/second-monitor-not-detected#when-its-the-monitor).

Monitor menus look different on each model. Your monitor’s manual names the buttons.

## 2. Check the cable, adapter and port

Microsoft and Apple both start here, because docks, adapters and worn cables cause many of these problems.

1. Unplug any dock, hub or adapter. Connect the monitor **straight to the computer** if you can.
2. Push the cable in firmly at both ends.
3. Try another cable. If the new one works, the old one was faulty.
4. Try another video port on the computer and on the monitor. On a desktop PC with a graphics card, use the ports on the card, lower down at the back.

> USB-C: not every port carries a picture
>
> A USB-C port needs DisplayPort Alt Mode, or Thunderbolt, to send a picture. Ports that do often have a small **DP** logo next to them. Your computer’s manual says which ports carry video. The wrong port gives no picture, but it does no harm.

An **HDMI splitter** can’t give you two different screens: it sends the same picture to both.

## 3. Make the computer look again

### Windows

1. Press Windows + P and choose **Extend**. **Duplicate** shows the same picture on both, and **PC screen only** turns the second one off.
2. Open **Start** **Settings** **System** **Display**. Open **Multiple displays** and select **Detect**.
3. Press Windows + Ctrl + Shift + B. This restarts the graphics driver.
4. Restart the computer. If that doesn’t help, shut it down fully, then turn it on again.

**Identify** in the same Display settings puts a number on each screen. It only shows up once Windows finds more than one display.

### Mac

1. Unplug the monitor’s video cable and power cable, then plug them back in.
2. Put the Mac to sleep, then wake it. On a MacBook, close the lid for a few seconds, then open it.
3. Open **Apple menu** **System Settings** **Displays**. Hold Option: a **Detect Displays** button appears. Click it.
4. On a MacBook with Apple silicon, watch for a message that asks to **allow the accessory** to connect. Unlock the Mac, then click **Allow**. If you don’t, the monitor stays dark. You can change this later in **System Settings** **Privacy & Security** **Accessories**, next to **Allow accessories to connect**.
5. Restart the Mac.

## 4. Check how many screens your computer supports

A computer can only drive a certain number of screens. A monitor past that limit stays dark, however good the cable is.

| Mac | External displays |
| - | - |
| MacBook Air with M1 or M2, 13-inch MacBook Pro with M1 or M2, MacBook Neo | 1 |
| MacBook Air or MacBook Pro with the plain M3 | 2, but only with the lid closed |
| MacBook Air or MacBook Pro with the plain M4 or M5 | 2, with the lid open |

MacBook Pro models with Pro and Max chips support more. Using two monitors with an M3 MacBook? Close the lid, and use an external keyboard and mouse with the power connected. If you open the lid, the second monitor goes dark. The limits for every Mac and for Windows PCs are in [how many monitors can my PC support](https://devicetests.com/how-many-monitors-can-my-pc-support).

On a Windows laptop with one video port, you can use one external monitor unless you add a dock or USB adapter. Its manual or spec page says how many screens it supports.

## 5. Docks and DisplayLink adapters

Some docks and adapters work through software called **DisplayLink**. They carry a DisplayLink sticker or say so in their manual. Without the software, the monitor stays dark.

1. Download the DisplayLink software from the Synaptics website, or the link in your dock’s manual, and install it.
2. On a Mac, allow it in **System Settings** **Privacy & Security**, under **Screen & System Audio Recording** (called **Screen Recording** on older macOS): turn on **DisplayLink Manager**, then quit and reopen it.
3. Plug the dock straight into the computer, not into another hub.

Other devices on the dock drop out too? See [USB devices disconnecting from a hub or dock](https://devicetests.com/usb-hub-disconnecting).

## 6. Update or roll back the graphics driver

Do this on Windows when the monitor stopped working after an update, or nothing above helped.

1. Install updates: **Settings** **Windows Update** **Check for updates**. Graphics drivers are often under **Advanced options** **Optional updates**.
2. Right-click **Start** and open **Device Manager**. Open **Display adapters**.
3. If it started after an update: right-click your graphics, choose **Properties** **Driver** **Roll Back Driver** and restart.
4. No roll back? Right-click it, choose **Uninstall device**, tick **Attempt to remove the driver for this device**, select **Uninstall**, and restart. Then open **Device Manager** and **Display adapters** again, right-click your graphics, choose **Update driver** and **Search automatically for updated driver software**.

On a Mac, install the latest macOS update. For a monitor made by another company, check its maker’s site for new firmware. On Ubuntu, see [external monitor problems on Ubuntu](https://devicetests.com/fix-external-monitor-display-issues-ubuntu).

## When it’s the monitor

The monitor itself is the likely fault when:

- it shows no light and no menu with a known good power cable, or
- it stays black on a second computer or a games console with a cable that works elsewhere.

Check its warranty on the maker’s site first. For a monitor out of warranty, see [what a monitor repair costs](https://devicetests.com/how-much-does-it-cost-to-fix-a-monitor-screen).

## Questions people ask

**Why does my second monitor say No signal?**

The monitor is on, but no picture reaches the input it’s set to. Pick the right input with its buttons, then try another cable and port. If the computer sees the monitor but shows the same picture on both, press Windows + P and choose Extend.

**Why is my second monitor detected but black?**

On a Mac, you may have exceeded the number of displays it supports, or not allowed the accessory to connect. On Windows, press Windows + P and choose Extend, then restart the graphics driver with Windows + Ctrl + Shift + B.

**Why did my second monitor stop working after an update?**

A new graphics driver can cause it. Roll back the driver in Device Manager, as shown above, or install the newest one from Windows Update’s optional updates or your graphics maker.

**Can I connect two monitors to one port?**

Sometimes. A dock or daisy chain can share one port on many computers, but it doesn’t raise the number of screens your computer supports. An HDMI splitter only copies one picture.

**The second monitor works but runs at 60 Hz. Why?**

The cable, the port or the setting limits it. The [multi-monitor test](https://devicetests.com/multi-monitor-test#a-screen-runs-at-60-hz-instead-of-its-top-rate) has the fixes, and the [refresh rate test](https://devicetests.com/refresh-rate-test) measures each screen.

## Sources

- [Microsoft: Troubleshoot external monitor connections in Windows](https://support.microsoft.com/en-us/windows/hardware/display-graphics/troubleshoot-external-monitor-connections-in-windows)
- [Microsoft: How to use multiple monitors in Windows (Detect, Identify, Windows key + P)](https://support.microsoft.com/en-us/windows/how-to-use-multiple-monitors-in-windows-329c6962-5a4d-b481-7baa-bec9671f728a)
- [Microsoft: Fix USB-C problems in Windows (DisplayPort Alternate Mode)](https://support.microsoft.com/en-us/windows/hardware/usb/fix-usb-c-problems-in-windows)
- [Microsoft: Get recommended and optional drivers from Windows Update](https://support.microsoft.com/en-us/windows/hardware/drivers/automatically-get-recommended-and-updated-hardware-drivers)
- [Apple: If your external display is dark or low resolution](https://support.apple.com/en-us/102501)
- [Apple: Allow USB and other accessories to connect to your Mac](https://support.apple.com/en-us/102282)
- [Apple: How many displays can be connected to MacBook Air](https://support.apple.com/en-us/122212)
- [Apple: How many displays can be connected to MacBook Pro](https://support.apple.com/en-us/101571)
- [Apple: Use two displays with a MacBook Air or MacBook Pro with M3 (lid closed)](https://support.apple.com/en-us/117373)
- [VESA: DisplayPort FAQ (DisplayPort over USB-C, the DP logo)](https://www.displayport.org/faq/)
- [DisplayLink (Synaptics): First-step troubleshooting, and the macOS Screen Recording permission](https://support.displaylink.com/knowledgebase/articles/2008685-macos-screen-recording-permission)
- [Dell: Multi-monitor displays black or not detected (read from a Wayback Machine copy, August 2026)](https://www.dell.com/support/contents/en-us/article/product-support/self-support-knowledgebase/monitor-screen-video/multiple-displays-not-working)

## Test it yourself

Check your own device with a free test. It runs in your web browser.

- [Dead pixel test](https://devicetests.com/dead-pixel-test): Find dead or stuck pixels on your screen.
- [Stuck pixel fixer](https://devicetests.com/stuck-pixel-fixer): Try to unstick a pixel that shows the wrong colour.
- [Refresh rate test](https://devicetests.com/refresh-rate-test): See how many times per second your screen updates.
