---
title: "Speed Tests Show Different Results? Which One to Trust"
description: "Two speed tests, two numbers? Each one measures a different path with its own method. See which result answers your question and how to compare them fairly."
url: https://devicetests.com/speed-tests-different-results
language: en
---

# Internet Speed Tests Disagree? Which Result to Trust

By Eric Buchanan · Published November 6, 2026

Short answer

Both numbers can be right. Each speed test measures the path from your device to its own server, in its own place, with its own method.

So trust the test that fits your question. To check the speed you pay for, test on a computer plugged into the router with a cable. To see what a slow phone really gets, test on that phone. Only compare results taken on the same device and connection, a few minutes apart.

Every speed test measures this whole path, up to its own server. Different tests end at different servers.

_A laptop on Wi-Fi, a router, a line into a shaded area with a server in it, then a point where the line leaves the area and goes on to a second, taller server_

1. Your device. Its Wi-Fi, its browser and how fast it is set a limit of their own.
2. Wi-Fi. Walls and distance slow it down. A cable skips this part.
3. Your router. A router app’s test, or a “speed to gateway” test in your provider’s app, starts here. It leaves out your Wi-Fi and your device.
4. A test server inside your provider’s network. Your provider’s own test often ends here, and so can Speedtest’s nearby server.
5. Where your provider meets the rest of the internet. It can get busy in the evening.
6. A server farther out. Google’s speed test (M-Lab) usually ends out here, and so do many websites, games and video services.

## Why two tests give different numbers

They don’t measure the same thing. Each test picks its own server and has its own way of turning data into one number.

- **Speedtest by Ookla:** a nearby server with a fast ping. Internet providers and mobile networks run these servers, and you can pick another one. It opens several connections at once, more if it needs them, to show the most your line can carry.
- **Google’s speed test** (in search results): run by a research group, M-Lab, on servers that are usually outside your provider’s own network. One connection, for about 10 seconds each way. Google says it measures up to 700 Mbps, and faster lines could read lower.
- **Cloudflare** (speed.cloudflare.com): Cloudflare’s nearest server. It sends files of set sizes several times and doesn’t try to fill your line. So it shows what you typically get, not the most.
- **Fast.com** (Netflix): Netflix’s own servers. Netflix says most of its viewers get video from servers inside or right next to their provider’s network. **Show more info** adds upload and ping. **Settings** changes the number of connections and how long it runs.
- **Your provider’s speed test:** Xfinity, for example, picks the closest of its test servers by your location. It asks you to test on a computer with a network cable.
- **A router app, or a “speed to gateway” test in your provider’s app:** measures from your router, not from your phone. So it leaves out your Wi-Fi and your device. eero says its result doesn’t change as you walk around your home. Xfinity also has a “Speed to Device” test: that one is a device test.
- **Our speed test:** our one test server, and the result names its city. 4 connections, 10 seconds down, then 10 seconds up. It shows your average after the first seconds, not your fastest moment.

_Two laptops joined to the same server by a wide line. In the top line one thin bar runs part of the way and gets thinner after a break. In the bottom line four bars fill the line; one has a break and the others carry on._

1. One connection: like one file download. On a fast line or a long path it can use only part of the line. Google’s speed test (M-Lab) works like this.
2. Several connections at once, like Speedtest and our test. Together they get close to the most your line can carry.
3. When a bit of data gets lost, one connection slows down. With several, the others carry on. M-Lab says that’s why one connection shows problems on the way more clearly.

One connection can show less than your line can carry. Several at once get closer to the most.

So a test with one connection to a far server can show less than a test with many connections to a server inside your provider’s network. Neither one is broken. As Cloudflare puts it, no speed test is a final measure of your provider’s service.

## Which result answers your question

What do you want to know?

- [Am I getting the speed I pay for?](https://devicetests.com/speed-tests-different-results#compare-two-tests-fairly): Use a computer on a network cable, with nothing else online. Test to a nearby server: your provider’s test or Speedtest. Repeat it in the evening
- Why is it slow on this phone, or in this room? · Test on that device, in that spot. Then compare it with the cable result
- Is it my Wi-Fi or my line? · Compare a test on a cable with one on Wi-Fi, same device, same test. A router app’s test helps too: if the device is much slower, look at the Wi-Fi or the device first
- Why is one game, website or service slow? · A speed test can’t prove why one service is slow. If speed tests are fine, check that service itself first. A test to a farther server, such as Google’s (M-Lab), only shows another path
- Fast.com or my provider’s test is much faster than the rest · Their servers often sit inside or right next to your provider’s network. Others cross more of the internet
- [The speed is fine, but calls or games still stutter](https://devicetests.com/bufferbloat-test): Speed isn’t the problem then. Check how fast your connection answers (ping), and whether it slows when the line is busy
- [The internet keeps cutting out](https://devicetests.com/internet-stability-test): A speed test is too short to catch that. Record it for longer

## Compare two tests fairly

Change one thing at a time. Then you know what made the difference.

1. Use the same device in the same place for both tests, in the same browser or app. A computer on a network cable gives the steadiest results. No cable? Use the same phone, close to the router.
2. Pause downloads, video and backups, on this device and on the others.
3. Turn off any VPN, or leave it on for both tests.
4. Run test A twice, then test B twice, straight after each other. In Speedtest, keep the same server. Tests a few minutes apart can still differ a little, Ookla says.
5. Do the same again on a weekday evening between 7 and 11 pm. The US regulator (FCC) reports on those busy hours in its own broadband tests.
6. Write down every result with the conditions in the log below.

> Don't average them
>
> An average of a phone on Wi-Fi and a computer on a cable answers no question. It isn’t your “real” speed either. Keep the results apart and compare them in pairs, like with like.

The log keeps your results in this browser. After each new result, it says what changed since the one before and whether the two can be compared. It only knows what you tell it, and it compares the download speeds.

The log uses these rules:

| Between two results | What it means |
| - | - |
| Nothing changed | A repeat. Small changes are normal; big swings mean the line itself changes. |
| Only the test changed | A fair comparison of the tests. The gap points to their servers and methods. |
| Only the device, connection, VPN, others online or time changed | A fair test of that one thing. The gap points to it: repeat the pair to be sure. |
| A router test against a device test on home Wi-Fi or a cable | A check of your home: a slower device points to the Wi-Fi or the device. |
| Two or more things changed | Not a fair comparison. Test again and change one thing. |
| Downloads within 10% | About the same. This is our own rule of thumb. |
| One result from 7 to 11 pm or on another day, the other not | Counts as a change of time: evenings are the busiest time. |

> How the FCC tests, and how you can copy it
>
> For its Measuring Broadband America reports, the FCC puts a small test box right at the router. It holds off while the home is using the internet, opens 8 connections at once, and reports weekday evenings from 7 to 11 pm on their own. A computer on a cable, with everything else paused, at the same times, comes close.

## What our speed test measures

Test it now

Internet speed test

It shows your download and upload speed between this device and our one test server, right now.

[Open the internet speed test](https://devicetests.com/internet-speed-test)

![Our speed test's chart, Download and upload speed during the test: download 92 Mbps, upload 19 Mbps. The download line starts a little lower, then stays near 92 Mbps for 10 seconds; the upload line stays near 19 Mbps. Under the chart: Measured to our test server.](https://devicetests.com/_astro/speed-test-chart.C4aWnrON_Z1ucyxi.webp)

The chart follows the speed through each part of the test. The result is the average after the first seconds, not the highest point.

Here is exactly what it does:

- **Ping first:** 10 tiny messages to our server. The middle value is your ping.
- **Download:** 4 connections at once for 10 seconds. The first 1.5 seconds don’t count, because connections start slowly.
- **Upload:** the same for 10 seconds. The first 2 seconds don’t count.
- **The number:** all the data that moved after that start, divided by the time. That’s your average, not your fastest moment. A test that shows its peak can look higher.
- **Data limit:** on a very fast line it stops early, after 400 MB down or 200 MB up. So one run can use up to 600 MB: on mobile data, don’t test again and again.

> What our test can't tell you
>
> It measures to our one server, so your speed to a game, a video service or a website elsewhere can differ. When you reach the most our server measures, the result says “at least”. Above about 300 Mbps, the browser, the device and Wi-Fi often set the limit. If you switch tabs, the test stops, because browsers slow down hidden pages. More in [how we test your internet](https://devicetests.com/how-we-test#internet).

## Other reasons for a gap

What else is different?

- One number is in MB/s · Download windows often show megabytes per second. Multiply by 8 to get Mbps: 12 MB/s is 96 Mbps
- Your Wi-Fi settings show a “link speed” · That’s the most the Wi-Fi link to the router can carry, not your internet speed. TP-Link says real transfers are typically 40 to 60% of it
- A VPN was on for one test · A VPN can send the test through its own server, sometimes far away. Turn it off for both tests
- One test in a browser, one in an app · Ookla says browsers differ on fast connections, and its apps usually give more reliable results
- Your plan is faster than 700 Mbps · Google says its test measures up to 700 Mbps, so it could read low on a faster line
- [The cable is slower than Wi-Fi, stuck near 94 Mbps](https://devicetests.com/why-is-my-internet-slow#stuck-near-94-mbps-on-a-cable): A port, cable or adapter on the way only runs at 100 Mbps
- Your plan is in Gbps · 1 Gbps is 1,000 Mbps
- The ping differs too · Ookla’s help says it takes the lowest of several pings. Ours takes the middle one of 10, so ours is often a little higher
- The phone was on mobile data · That’s a different connection, not your home internet. Turn on Wi-Fi or test on another device
- A different phone or laptop · Devices have different Wi-Fi radios. Some can’t reach a fast plan at all

## When to contact your provider

When the fair results are still slow, contact your provider. Bring results they can look into. **Copy the log** above gives you the list.

1. Your results on a computer with a network cable, with nothing else online.
2. At least two different tests, each run more than once.
3. The date and time of each, including weekday evenings.
4. Your plan’s speed, from your bill or your plan’s page. In the US, it’s on the **Broadband Facts** label.

Fixes for slow Wi-Fi, an old router or a busy evening are in [why is my internet so slow](https://devicetests.com/why-is-my-internet-slow). How much speed you need at all is in [what is a good internet speed](https://devicetests.com/good-internet-speed).

## Questions people ask

**Which internet speed test is the most accurate?**

None is “the” accurate one. Each is accurate for its own path and method. For the speed you pay for, use a test to a nearby server on a computer with a cable. For what a phone or room really gets, test there. Speedtest, Google’s test (M-Lab), Cloudflare, Fast.com, your provider’s test and ours all answer slightly different questions.

**Why is my provider's speed test faster than other tests?**

Its servers are close to you, often inside your provider’s own network. M-Lab notes that many popular tests are hosted inside providers’ networks. Other tests may cross more of the internet, including the point where your provider meets other networks. Both numbers are real: one for the line to your provider, one for the longer path.

**Why is Google's speed test slower than Speedtest?**

Google’s test is run by M-Lab. It uses one connection, for about 10 seconds each way, to servers that are usually outside your provider’s own network. Speedtest uses several connections to a nearby server, often run by a provider. Google also says its test measures up to 700 Mbps, so a faster line could read lower.

**Why is my router app's speed much higher than my phone's?**

The router app measures at the router, so your Wi-Fi and your phone aren’t part of it. A big gap points to your home network. Move closer to the router and test again to see how much the Wi-Fi takes.

**Should I average several results?**

Only results taken with the same test, device and connection, close together. Never average results from different devices, connections or times. That number doesn’t belong to any of them.

**Why does my result change every time I test?**

Your line is shared with other homes, and so is the internet beyond it. Tests a few minutes apart can differ a little. If results swing a lot on a cable with nothing else online, write them down with the times and show them to your provider.

## Sources

- [Ookla: Assessing test results (browsers, devices, servers, same connection)](https://www.speedtest.net/help/guides/assessing-test-results)
- [Ookla: Adjusting servers (a nearby server with a fast ping, hosted by internet providers)](https://www.speedtest.net/help/guides/adjusting-servers)
- [Ookla: How Speedtest measures (several connections, more if needed)](https://www.speedtest.net/help/guides/assessing-accuracy)
- [Ookla: Speedtest methodology (filling the connection)](https://www.ookla.com/resources/guides/speedtest-methodology)
- [Google Search Help: Run an internet speed test (M-Lab, up to 700 Mbps)](https://support.google.com/websearch/answer/6283840?hl=en)
- [Measurement Lab: Understanding speed test results (one stream, servers outside provider networks)](https://www.measurementlab.net/blog/speed-tests-accuracy/)
- [Measurement Lab: ndt7 protocol (one connection, at most 10 seconds)](https://github.com/m-lab/ndt-server/blob/main/spec/ndt7-protocol.md)
- [Cloudflare: How does Cloudflare's speed test really work?](https://blog.cloudflare.com/how-does-cloudflares-speed-test-really-work/)
- [Netflix: FAST.com (Netflix servers, Show more info, Settings)](https://fast.com/)
- [Netflix: How Netflix works with ISPs (servers inside or directly connected to your provider)](https://about.netflix.com/en/news/how-netflix-works-with-isps-around-the-globe-to-deliver-a-great-viewing-experience)
- [Xfinity: Speed test FAQs (closest server, test on an Ethernet cable)](https://www.xfinity.com/support/articles/xfinity-speed-test-faqs)
- [Xfinity: Test your speed to the gateway (not affected by Wi-Fi or the device, 90% of the plan)](https://www.xfinity.com/support/articles/test-speed-to-gateway-xfinity-app)
- [eero: What do my eero App speed test results mean? (measured at the gateway eero)](https://eero.com/support/articles/what-do-my-eero-app-speed-test-results-mean)
- [FCC: Measuring Broadband America, technical appendix (test box at the router, quiet home, 7 to 11 pm peak)](https://data.fcc.gov/download/measuring-broadband-america/2022/Technical-Appendix-fixed-2022.pdf)
- [TP-Link: What is Wi-Fi link speed (real speed is typically 40 to 60% of it)](https://www.tp-link.com/us/support/faq/2265/)
- [Mozilla: Troubleshooting speed issues with Mozilla VPN](https://support.mozilla.org/en-US/kb/troubleshooting-speed-issues-mozilla-vpn)

## Test it yourself

Check your own device with a free test. It runs in your web browser.

- [Internet speed test](https://devicetests.com/internet-speed-test): Measure your download and upload speed.
- [Internet stability test](https://devicetests.com/internet-stability-test): Record your connection for hours and see when it drops.
- [Ping test](https://devicetests.com/ping-test): Measure how fast your connection responds.
