---
title: "Tap BPM – Tap Tempo Counter for Beats per Minute | DeviceTests"
description: "Tap any key or the screen in time with a song to find its tempo in BPM. Live BPM, steady or uneven, half and double time, and note lengths in milliseconds."
url: https://devicetests.com/tap-bpm
language: en
---

# Tap BPM

Tap along to any song to find its tempo in beats per minute.

> **Interactive test.** This test runs in the browser on the user's own device and uses that device's hardware, so an AI agent can't run it for the user. To use it, the user opens <https://devicetests.com/tap-bpm> in a browser.
>
> **What it needs:** A keyboard, a mouse or a touch screen; for the Listen mode, a microphone. The user taps in time with music they hear, or lets the microphone hear it, and the page shows the tempo in beats per minute, with half and double time and milliseconds per beat. It doesn't look up songs by name, so an agent can't find a song's tempo with it; the user has to tap or play the music.
>
> **Cost:** Free. Nothing to install and no account.

This BPM counter needs JavaScript to time your taps. Turn on JavaScript, or open this page in a current Chrome, Edge, Firefox or Safari.

## Quick start

1. Play the song and listen for the beat, often the drum.
2. Tap the **Tap** button, or press any key, on each beat.
3. Keep tapping until it says **Steady**. Then read the BPM.

## How to find the BPM of a song

1. Play the song. Listen for the beat, often the bass drum or a clap. It is where your foot wants to tap.
2. Tap the **Tap** button, or press any key, on each beat.
3. Keep tapping for about 8 beats, until it says **Steady**.
4. Read the big number. That is the song’s tempo in beats per minute (BPM).
5. Does the song feel twice as fast or half as fast as that? Then use **Double time** or **Half time** instead.

No screen to tap? Count the beats for 15 seconds on a clock, then multiply by 4. That gives a rough BPM.

### How to read your tempo

| What you see | What it means |
| - | - |
| **The big number** | The tempo in whole beats per minute (BPM). Use this one. |
| **To one decimal** | The same estimate to one decimal place. A song made on a computer often has a whole number, such as 120. |
| **Keep tapping** | Fewer than 6 taps so far. The number can still change. |
| **Steady** | Your taps are even. The tempo is reliable. |
| **Uneven** | Your taps vary a lot. Listen for the drum and tap with it. |
| **Half time** and **Double time** | The same song counted every other beat, or twice per beat. |
| **Last count** | You stopped tapping. The number is your last result. The next tap starts again. |
| **Sure**, **Fairly sure**, **Not sure** | Listen mode only: how clearly the microphone hears a steady beat. |
| **It could also be …** | Listen mode only: half or double the tempo fits the beat almost as well. Count along to choose. |

Common tempos give you an idea of what to expect:

| Music | Typical tempo |
| - | - |
| Slow ballads | 60–80 BPM |
| Hip-hop | 80–100 BPM |
| Pop and rock | 100–130 BPM |
| House and techno | 120–135 BPM |
| Drum and bass | 160–180 BPM |

Sheet music uses Italian words for tempo instead: see [tempo markings](https://devicetests.com/tempo-markings).

> **Tip:** Once you know the tempo, press **Play this tempo on the metronome** to practise along at the same speed.

## If something’s wrong

### The number jumps around

Tap at least 8 times, on every beat. The bass drum or a hand clap is the easiest sound to follow. If the song changes speed, the count starts again with the new tempo.

### It says Uneven

Your taps are far apart from an even beat. Try tapping with one finger, on a table or on the button, and don’t look at the screen while you tap.

### Pressing a key does nothing

Click an empty part of the page first. Keys don’t tap while you are typing in a box or using another button. Then press the Space bar on each beat.

### Some taps are not counted

A tap far between two beats, or two taps very close together, is left out on purpose, so one slip doesn’t spoil the result. The page says so in the line above the button.

### Listen mode shows no number

The microphone needs about 6 seconds of music with a clear beat. Turn the music up, or hold your device closer to the speaker. Talking near the microphone makes it harder. Music without drums may never give a number: tap along instead.

### Listen mode says half or double what I hear

Some songs fit two tempos, for example 87 and 174. Look at **Half time** and **Double time**, and pick the one your foot taps to.

### The count started again

You stopped for about two seconds, or for two and a half beats at a slow tempo. That starts a new count. Keep tapping without a break.

## How this BPM counter works

The page notes the time of every tap from your browser’s own clock, to a fraction of a millisecond. A touch counts when your finger lands. A key counts when you press it down, and holding a key down counts only once.

It then draws a straight line through your last 16 taps, beat by beat. The slope of that line is the time of one beat. 60,000 divided by that time, in milliseconds, is the BPM. This uses every tap, so it is steadier than timing just the first and the last tap.

Taps more than about a third of a beat away from the line are left out. A tap two or three beats after the last one counts as a missed beat. When your last five taps agree on a new speed, the count starts again from them.

**Listen mode** works on the sound itself. About 100 times a second, it measures how much new sound starts, such as a drum hit. It then looks for the time step at which those hits repeat best, over the last 10 seconds. Half and double time repeat too, so it prefers tempos between about 70 and 180 BPM and tells you when the other one fits almost as well. It is sure only when the beat is strong and stays the same for a few seconds. Your browser’s noise filters are turned off, so they don’t fade the music. The sound never leaves your device.

Your taps are timed on your device. Nothing is sent anywhere. Your own timing is the biggest limit: most people tap within 20 to 40 milliseconds of the beat, which is why the page uses many taps.

[How we test our tools](https://devicetests.com/how-we-test)

## Questions and answers

**How does tap BPM work?**

Every time you tap, the page notes the exact time. It draws a straight line through your last 16 taps and works out how many beats that makes per minute. Every tap counts, so one tap that is a little early or late moves the number very little.

A tap far off the beat, or a double tap, is left out. A missed beat is fine: the count skips it.

**How many times should I tap?**

You see a tempo from the second tap, but it settles after about 8 taps. Keep tapping until the readout says **Steady**. For a slow song, that takes a little longer.

**Why is my BPM twice or half what I expected?**

Songs can be counted in two ways. You may tap every drum hit, or every other one. Both are right, but they give two numbers, for example 70 and 140.

The page shows **Half time** and **Double time** under the result. Most songs are between 70 and 160 BPM, so it gives a hint when your number is outside that.

**How do I start a new count?**

Stop tapping for about two seconds. Your next tap starts a new count. Or press **Start over**, or the Esc key.

**Can it listen to the song through my microphone?**

Yes. Press **Listen with the microphone**, then **Start listening**, and let the music play near your device. A first number comes after about 6 seconds. The page says how sure it is: **Sure**, **Fairly sure** or **Not sure**.

It works best with music that has a steady drum beat, such as pop, rock, hip-hop and dance music. Quiet, slow or live music without drums is harder, and it can find half or double the tempo. If the number looks wrong, tap along instead. The sound is analysed on your device. Nothing is recorded or sent.

**Can I find the BPM of a song file?**

Yes. Our [BPM finder](https://devicetests.com/bpm-finder) reads a song file on your device, such as an MP3 or M4A, and finds its tempo. The file is not uploaded. We don't look up songs by name.

**Can I count my heart rate with it?**

You can tap along with your pulse, and it shows beats per minute. But it is not a medical test. Use a heart rate monitor, or ask a doctor, if you need to know your heart rate.

**What are the note lengths for?**

They show how long each note lasts at your tempo, in milliseconds. Music producers use them to set delay and reverb times, so the echoes land on the beat. A quarter note is one beat. Its length is 60,000 divided by the BPM.

**Does it work on a phone or tablet?**

Yes. Tap the big **Tap** button with any finger. The page counts the moment your finger touches the screen, not when you lift it.

## Related tests

- [Metronome](https://devicetests.com/metronome): Keep time from 20 to 300 BPM, in any common time signature, with tap tempo.
- [BPM finder](https://devicetests.com/bpm-finder): Find the tempo of a song file in beats per minute, on your device.
- [Guitar tuner](https://devicetests.com/guitar-tuner): Tune a guitar, bass, ukulele or violin with your microphone, or by ear.
- [Spacebar counter](https://devicetests.com/spacebar-counter): See how fast you can press the spacebar.
- [Tone generator](https://devicetests.com/tone-generator): Play any frequency, noise or a sweep, on the left, right or both sides.
