---
title: "Tone Generator – Play Any Frequency, Noise or Sweep Online"
description: "Free online tone generator: any frequency from 1 to 20,000 Hz as a sine, square, sawtooth or triangle wave, plus noise and sweeps. Left, right or both."
url: https://devicetests.com/tone-generator
language: en
---

# Tone generator

Play a tone at any pitch, or noise or a sweep, on the left, the right or both sides.

> **Interactive test.** This test runs in the browser on the user's own device and uses that device's hardware, so an AI agent can't run it for the user. To use it, the user opens <https://devicetests.com/tone-generator> in a browser.
>
> **What it needs:** Speakers or headphones on the device: built in, wired or Bluetooth. The page makes tones (1 to 20,000 Hz, sine, square, sawtooth or triangle), white, pink or brown noise and frequency sweeps in the user's own browser and plays them on the left, the right or both sides; the user listens. Links open exact settings (?hz=440&wave=square&channel=left, ?noise=brown, ?sweep=20-200&seconds=30) but never play by themselves, so an agent can link a tone but can't play it for the user. Not a hearing test.
>
> **Cost:** Free. Nothing to install and no account.

This tone generator needs JavaScript to make its sounds. Turn on JavaScript, or open this page in a current Chrome, Edge, Firefox or Safari.

## Quick start

1. Turn your device's volume down first.
2. Type a pitch, or press **440 Hz**.
3. Press **Play tone**, then raise the volume slowly.

## What to play

The **pitch** is how high or low a tone sounds. It is counted in hertz (Hz): how many times the sound vibrates each second. These pitches are the most useful:

| Pitch | What it is for |
| - | - |
| **50 Hz** or **60 Hz** | The hum of mains electricity (50 Hz in Europe, Asia and Africa, 60 Hz in North America). Hum in a sound system is often this pitch, or double it. |
| **100 Hz** | Deep bass. Checks a bass speaker. Subwoofers go lower, to about 30 Hz. |
| **440 Hz** | The note A above middle C. Musicians tune to it. |
| **1,000 Hz** | The standard test tone. Use it to set a comfortable volume. |
| **10,000 Hz** | High treble. Checks tweeters and earbuds. Many adults hear it only faintly. |

Singers can play a note to sing along with. The [vocal range chart](https://devicetests.com/vocal-range-chart) lists the notes of each voice type, with their Hz.

The **wave shape** changes how the tone sounds, not its pitch:

| Wave shape | How it sounds |
| - | - |
| **Sine** | Pure and smooth. Best for testing speakers and tuning. |
| **Square** | Hollow and buzzy, like an old video game. |
| **Sawtooth** | Bright and harsh, like a buzzer. |
| **Triangle** | Soft, between sine and square. |

**Noise** plays every pitch at once. **White** noise is a bright hiss, **pink** noise sounds like steady rain, and **brown** noise is a deep rumble like a waterfall. Noise is good for checking that both speakers sound the same.

**Several tones:** press **Add a tone** to play up to 4 tones together. Use it for chords (440, 550 and 660 Hz make an A major chord) or to hear **beats**: two tones a few hertz apart pulse as many times a second as the difference. Each tone has its own **Level**, to make one quieter than the others; **Volume** still changes them all.

A **sweep** glides from one pitch to another. Play **Full range** to hear where the sound fades in and out: that is where your speakers, or your ears, reach their limits. Play **Bass only** to find rattles and buzzing.

> **Tip:** Every sound plays at about the same average level, so switching rarely jumps. Square and sawtooth waves, and noise, play a little lower, because they sound louder. Very deep and very high tones, and brown noise, still sound quieter to your ears. Don’t turn the volume up for them.

## If something’s wrong

### No sound at all

1. Press **1,000 Hz**, then **Play tone**. Very low and very high tones can be silent on some speakers.
2. Check that your device isn’t muted, and that the sound goes to the speakers or headphones you are using.
3. Raise your device’s volume a little at a time, while the 1,000 Hz tone plays.
4. Still nothing? Raise the **Volume** slider on this page a little.

On iPhone or iPad, turn off Silent mode too.

### A very high or very low tone is silent

This is usually normal. Your speakers may not play it, or your ears may not hear it. Don’t turn the volume up to hear it. Try headphones or bigger speakers instead.

### The sound buzzes or rattles

1. Turn the volume down. Speakers buzz when they are pushed too hard, mostly with deep tones.
2. Play a **Bass only** sweep quietly. Note the pitch where it rattles.
3. Check for loose parts, screws or objects near the speaker.

If it still rattles at a low volume, the speaker may be damaged.

### Clicks or gaps when I change the pitch

The tone glides smoothly to a new pitch, so the page itself doesn’t click. Clicks or gaps can come from Bluetooth. Try wired headphones, or move closer to your device.

### Sound on one side only

1. Check **Play on**: it may be set to **Left** or **Right**.
2. Check your device’s balance setting. It should be in the middle.
3. Choose **Both**. If one side is still silent, try the [headphone test](https://devicetests.com/headphone-test) or the [sound test](https://devicetests.com/sound-test).

### The sound stopped by itself

A sweep stops at its end. A tone or noise stops when your phone locks, when a call comes in, or when you change the speakers. Press **Play** again.

## How the tone generator works

Your browser makes every sound on your device, with the Web Audio system built into it. Nothing is downloaded, and nothing is sent anywhere.

- **Pitch:** set to a hundredth of a hertz, from 1 to 20,000 Hz. It comes from your device’s sound clock, which can be off by a tiny amount: a few hundredths of a hertz at 440 Hz. Changes glide over a few hundredths of a second, so they don’t click.
- **Several tones:** each tone plays at its level divided by the square root of the number of tones. Tones at different pitches then keep the average level of one tone. Tones at the same pitch add up and sound louder, but even 4 of them at full volume stay well below the point where the sound is cut off.
- **Sound files:** the WAV file is made on your device from the same sound, faster than it plays: 16-bit, 44,100 samples a second, mono for both sides or stereo for one side.
- **Level:** sine and triangle waves play at the same average level. Square, sawtooth and noise play 3 dB lower. Every sound fades in over 0.3 seconds, and the volume starts at 30%. Press **Stop**, or the Esc key on a keyboard, to stop.
- **Sweep:** the pitch rises (or falls) by the same number of octaves each second, which is how we hear pitch.
- **Limits:** we can’t measure how loud the sound is in your ears or in the room. Bluetooth and some speakers cut off the highest tones. That depends on your device, its volume and your speakers. This page is not calibrated, and it is not a hearing test.

[How we test our tools](https://devicetests.com/how-we-test)

## Questions and answers

**Is this a hearing test?**

No. A tone generator plays sounds. It can't measure your hearing, because the sound also depends on your speakers, your headphones and the volume. To find the highest pitch you can hear, one ear at a time, use the [hearing frequency test](https://devicetests.com/hearing-test). It is not a medical hearing test either.

If you think your hearing has changed, see a doctor or a hearing specialist. They test each ear with calibrated equipment.

**Is it safe for my ears and my speakers?**

The tone starts quiet and fades in. Keep it that way: find a comfortable level at 1,000 Hz, and don't go much louder for other pitches.

Never turn the volume up to hear a very high or very low tone. Your ears may not hear it, but they can still be harmed. Loud deep tones can also damage small speakers.

**Why can't I hear 15,000 or 20,000 Hz?**

That is normal. Young people can hear up to about 20,000 Hz, but the top limit drops with age. Many adults hear nothing above 12,000 to 16,000 Hz.

Some speakers, earbuds and Bluetooth connections also cut off the highest tones. See [how high people hear at each age](https://devicetests.com/human-hearing-range).

**Why can't I hear the deep tones on my phone or laptop?**

Small speakers can't move enough air for deep bass. Most phone and laptop speakers play little below 100 to 200 Hz. Use headphones or bigger speakers for deep tones.

**Can I tune an instrument with it?**

Yes. Choose the note in **Musical note**, or press **440 Hz** for the A above middle C. Tune until the beating (a slow wobble in the sound) stops.

The pitch is set to a hundredth of a hertz and comes from your device's own clock. That is close enough for tuning. Under the pitch you see the nearest note, and how far off it is in **cents** (hundredths of a semitone).

**Can it help with tinnitus?**

You can use it to find a tone that sounds like your tinnitus, so you can describe it to a doctor. It isn't a treatment. Keep the volume low, and ask a doctor or hearing specialist for advice.

**Do "healing frequencies" such as 432 Hz or 528 Hz work?**

You can play any of them here. But there is no good evidence that a tone or frequency heals the body. We don't make health claims.

**Does it keep playing in the background?**

On a computer, yes. The sound plays on when you switch to another tab, until you press **Stop** or close the page.

On phones and tablets it stops when you switch apps, switch tabs or lock the screen.

**Can I play several tones at once?**

Yes, up to 4. Press **Add a tone** under the wave shape. Each tone gets its own pitch, wave shape and **Level**, and you can change them while they play. **Remove** takes a tone away again.

Each tone is turned down a little when you add one, so the sound never goes past its limit and doesn't crackle. Tones at the same or almost the same pitch can still sound louder together, so keep the volume low. Two tones a few hertz apart **beat**: the sound pulses as many times a second as the difference, for example 4 times a second for 440 Hz and 444 Hz.

**Can I download the tone as a sound file?**

Yes. Open **Download as a sound file (WAV)**, choose how long it should be, and press **Download WAV**. The size is shown before you download: 30 seconds is about 2.6 MB. Ten minutes is about 53 MB.

The file holds what **Play** would play: all your tones, or the noise or the sweep, on the side you chose, at the volume set on the page. It fades in and out, so it doesn't click. It is made on your device, nothing is uploaded. On iPhone and iPad it goes to the Files app (Downloads).

**Can I share a tone?**

Yes. The address in your browser changes with your settings, for example **/tone-generator?hz=1000\&wave=square**. Added tones are in it too. Press **Copy link** and send it.

The link opens the same settings, but never plays by itself, and always at the quiet starting volume.

**Can I play the tone through other speakers or headphones?**

Yes, in most browsers on a computer. Choose them in the **Play through** list under the volume. Firefox shows a **Choose speakers** button instead. Chrome, Edge and Safari on a Mac show the list only while this site may use your microphone. Otherwise, and on phones and tablets, change the output in your device's sound settings.

**Why does my music stop when I press Play on iPhone?**

On iPhone and iPad with iOS 17 or later, the tone plays like a video, so you hear it even in Silent mode. Like a video, it pauses music from other apps. Start your music again when you are done. On older versions, turn off Silent mode to hear it.

## Related tests

- [Headphone test](https://devicetests.com/headphone-test): Check left and right, polarity, bass rattle and earbud fit.
- [Sound test](https://devicetests.com/sound-test): Check your speakers, left and right, and stereo.
- [Mic test](https://devicetests.com/mic-test): Check that your microphone picks up your voice.
- [Microphone quality test](https://devicetests.com/mic-quality-test): Find out how good your microphone sounds, and why it sounds bad.
- [Surround sound test](https://devicetests.com/surround-sound-test): Check every 5.1 and 7.1 speaker, one at a time, and the subwoofer.

## Guides for this test

- [Human Hearing Range: How High Can You Hear at Your Age?](https://devicetests.com/human-hearing-range): People hear from about 20 to 20,000 Hz, and the top falls with age. See what a clinic study found by age, try a quiet tone check, and know when to get help.
