Software & AppsOperating SystemLinux

How To Upgrade Device Firmware from Command Line in Ubuntu

Ubuntu 6

In the world of Ubuntu, one of the most common tasks you may need to perform is upgrading your device’s firmware. This is an essential process for ensuring your device is running optimally and has the latest security updates. In this article, we’ll guide you through the process of upgrading your device firmware from the command line in Ubuntu using the fwupd tool.

Quick Answer

To upgrade device firmware from the command line in Ubuntu, you can use the fwupd tool. First, install fwupd by running sudo apt install fwupd. Then, check for available firmware updates with fwupdmgr get-updates and update the firmware for all devices with fwupdmgr update. If you only want to update a specific device, use fwupdmgr update <device-id>. After the update process, some devices may require a reboot. Verify the firmware version with fwupdmgr get-devices or fwupdmgr get-updates.

Introduction to fwupd

fwupd is a simple daemon built by GNOME to allow session software to update device firmware on your local machine. It’s designed for Linux distributions like Ubuntu and can be used to update firmware for a variety of devices, including but not limited to, motherboards, network cards, and graphics cards.

You can find more about fwupd on its official GitHub page.

Installing fwupd

Before we start with the firmware upgrade, we need to ensure that fwupd is installed on your Ubuntu machine. You can do this by opening a terminal and running the following command:

sudo apt install fwupd

In this command, sudo is used to run the command with root privileges, apt is the package handling utility in Ubuntu, and install is the command to install a new package. fwupd is the name of the package we want to install.

Checking for Available Firmware Updates

Once fwupd is installed, we can check for available firmware updates by running the following command:

fwupdmgr get-updates

In this command, fwupdmgr is the firmware update manager, and get-updates is the command to check for available firmware updates. This command will display a list of devices with available firmware updates.

Updating the Firmware

To update the firmware for all devices, run the following command:

fwupdmgr update

This command will download and install the firmware updates for all supported devices. The update command is used to initiate the update process.

If you only want to update the firmware for a specific device, you can specify the device ID in the command. For example:

fwupdmgr update <device-id>

Replace <device-id> with the actual device ID of the device you want to update. You can find the device ID by running fwupdmgr get-devices.

Post-Update Steps

After the firmware update process is complete, some devices may require a reboot. Make sure to save all your work and close any open applications before rebooting.

You can verify the firmware version by running fwupdmgr get-devices or fwupdmgr get-updates again.

Conclusion

Updating your device’s firmware is a critical task that ensures your device’s optimal performance and security. With fwupd and the command line in Ubuntu, you can easily check for and install firmware updates. Remember to always keep your system up-to-date and reboot your device after a firmware update if required.

We hope this guide has been helpful. For more information on fwupd and its commands, you can check the man pages by running man fwupdmgr in the terminal or visit the official fwupd documentation.

Can I upgrade the firmware of any device using `fwupd`?

fwupd is designed to update firmware for a variety of devices, including motherboards, network cards, and graphics cards, among others. However, not all devices are supported. You can check for available firmware updates using fwupdmgr get-updates.

How do I install `fwupd` on Ubuntu?

You can install fwupd on Ubuntu by opening a terminal and running the command sudo apt install fwupd. This will install the fwupd package using the apt package handling utility.

How do I check for available firmware updates?

To check for available firmware updates, you can run the command fwupdmgr get-updates in the terminal. This will display a list of devices with available firmware updates.

How do I update the firmware for all devices?

To update the firmware for all devices, run the command fwupdmgr update. This will download and install the firmware updates for all supported devices.

Can I update the firmware for a specific device?

Yes, you can update the firmware for a specific device by running the command fwupdmgr update <device-id>. Replace <device-id> with the actual device ID of the device you want to update. You can find the device ID by running fwupdmgr get-devices.

Do I need to reboot my device after a firmware update?

Some devices may require a reboot after a firmware update. It is recommended to save all your work and close any open applications before rebooting. You can verify the firmware version by running fwupdmgr get-devices or fwupdmgr get-updates again.

Where can I find more information about `fwupd` and its commands?

For more information on fwupd and its commands, you can check the man pages by running man fwupdmgr in the terminal. You can also visit the official fwupd documentation for additional resources.

Leave a Comment

Your email address will not be published. Required fields are marked *