PC Accessories

Verizon FiOS Router Blinking White (Why & How To Fix)

Quick Answer

If you ever experienced a blinking white light on a Verizon FiOS router that never turns to solid white, it’s possible to fix it by firmly reattaching the loose cables at the back. You can also power cycle or reset the router to resolve the problem.

Verizon FiOS router, featuring the latest WiFi 6 technology, offers high internet speed and improved performance. However, users are often clueless to troubleshoot the technical issues with the router.

We have complied a step-to-step guide for you to quickly understand why your FiOS router is blinking white, when it becomes an issue, and how to fix it with easy DIY steps.

Why is Verizon FiOS Router Blinking White Light?

Verizon FiOS router usually exhibits a solid white light or fast-blinking white light.

A solid white light on the Verizon FiOS router means normal behavior. The router is connected to the WiFi, and it is functioning correctly. Usually, you see a solid light when you switch on the router, which then disappears automatically after 30 seconds.

Meanwhile, the fast-blinking white light indicates the router is undergoing a reboot process or upgrading its firmware. In case of firmware upgrade, the white light blinks fast for a few minutes until the system finishes installing the latest updates and turns to solid white light afterward.

However, if the routes continue to blink white, there is an issue with the router’s software, or the router fails to connect to Verizon while syncing. When this happens, you can’t seem to connect your devices to the internet.

How To Fix Verizon FiOS Router Blinking White Light?

Fixing the Verizon FiOS router blinking white light issue might seem like a complicated process. However, you don’t need to be tech-savvy to resolve the problem. Our step-by-step process will make the whole experience effortless for you.

Later in the guide, we’ll also explain checking Verizon service status. So without any further ado, here is the method to resolve the Verizon FiOS Router Blinking White light problem.

Step #1: Checking Router cables and connections

In the first step, you’ll check your router’s cable connections and connectors. Often, if you place the router somewhere else, the chances are that you might have not plugged in all the cables or not plugged them in firmly.

Due to a loose connection, white light might start blinking on the router. Therefore, start by checking the cables on the back of the router. If you find any one of them loose or not tightly pressed in, you’ve found the culprit. While at it, inspect both ends of the cables for any visible damage and replace them if needed.

Router Cables

Connector pins can bend if you try to use a little extra force to push in the cable. If that’s the case, use a thin metal object to straighten the bent pins.

Warning

Trying to fix the bent pins can cause them to break, and you can end up replacing the whole router. We strongly advise you to do the process gently and with extreme care.

Step #2: Power Cycling the Router

So your router cables are all fine and dandy? Next, power cycle the router to fix the issue on hand.

  1. Unplug the router’s power cable and wait for a couple of minutes.
  2. Now plug the power cable in and switch on the router.
  3. Wait for 3 to 5 minutes for the router to complete the reboot process.
  4. Now confirm that the router’s LED light is not blinking white.

Step #3: Reset the Router

If the blinking white light issue persists after the power cycle procedure, try resetting the router.

  1. Locate the Red Reset button on the back of your Verizon router.
  2. Now Press and hold the button for a few seconds until the LED light turns off, meaning the router initiates the reset process.
  3. Next, the FiOS router will reboot and turn back on after 3-5 minutes.
  4. Finally, verify that the LED light is solid white again and check internet speed and WiFi signal strength.
Information

Using the Red Reset button restores the router’s default settings. You’ll need to enter your login credentials again on your devices for internet connectivity.

Checking Verizon Servers

If you have tried all of the above steps but can’t get rid of the blinking white light, it may mean that the router can not connect to Verizon while it’s syncing. The issue manifests if the Verizon services are affected by an outage.

In this case, check the Verizon service status by contacting their help center or using a third-party website. If an outage is confirmed, wait patiently and allow some time for the Verizon technical staff to sort out the issue at their end. We’ve learned that service outage usually resolves within a few hours.

Summary

In this guide about Verizon FiOS Router Blinking White, we discussed a few reasons for the issue and explored easy DIY steps to fix it. We also discussed the possibility of the Verizon service outage resulting in connection failure and causing the white light to blink rapidly.

Hopefully, you don’t have to worry anymore, and this guide helped you resolve the issue. Now, the white light has stopped blinking on your FiOS router, and your internet is working fine.

Frequently Asked Questions

What is the function of the WPS button on my FiOS router?

FiOS router has a WPS button that allows you to connect to WiFi without manually entering a password. To set up the WPS function, press the unified button located on the front of your Fios Router and hold it for a couple of seconds.

Why is my FiOS router blinking blue light?

FiOS router blinks blue light when it is trying to establish an internet connection with another device. However, if the router light does not turn solid blue, the connection with another device has failed due to low WiFi signal strength.

To fix the blinking blue light, you can factory reset or restart your Verizon FiOS router with the steps mentioned above in this guide. However, you have to reconfigure your network settings after resetting the router.

Leave a Comment

Your email address will not be published.