GadgetsSmartwatchesApple Watch

Why Won’t My Apple Watch Turn On?

Apple Watch Message Prompt

The Apple Watch series has always provided its users with unrivaled smartwatch experiences. However, that does not make it perfect, especially when the powering and booting mechanisms are factored in. 

Quick Answer

If your Apple Watch isn’t booting up, the first step is to perform a force reboot. If that doesn’t work, checking the charging system is in play. Finally, specific troubleshooting options can be your lifesaver in such cases.

Nonetheless, many factors can be responsible for messing with your Apple Watch. Luckily, most of these are solvable with the help of some troubleshooting. 

This guide will show you how to fix the Apple Watch that’s not powering on. The process is lengthy, so you should pay close attention to each step. 

Diagnosing the Apple Watch Not Turning On Issue

Apple Watch Apps

As mentioned, multiple factors can be responsible for causing this issue. While you could spend the extra time to find the cause, it’s generally better to put your entire focus on the fixing part instead. This is because the reasons become apparent during the repairing/resetting processes. 

Check out the causes and their fixes below.

Reason #1: Software Crash

The most common cause for your Apple Watch not turning on is the frequent crashes that come with the device to date. While it’s Apple’s responsibility to fix these from the back end, certain bugs/errors still manage to pass through the quality assurance checks.

Your Apple Watch is likely facing such an issue causing it to appear blank. Surprisingly, your device will be on the entire time, but you will only be able to see a black screen similar to its powered-off state. 

A hard reset is generally the way to go for such cases. Hold the Digital Crown and the side button until the Apple Watch logo forms on the screen. 


If your Apple Watch is not responding to a hard reset, take it to a repair center. The repair team will re-install a new version of the watchOS inside it to fix your issue.

Reason #2: Screen Curtain

Blank Apple Watch

The Screen Curtain is an elusive feature present in the Apple Watch that allows users to operate their device using only voice commands. The screen turns completely blank, making it seem like the Apple Watch is off. 

However, this case is only plausible when the VoiceOver functionality is ON, so you can skip ahead if that’s not the case for your Apple Watch. Nevertheless, the likelihood of this instance occurring is exceptionally high, so it’s recommended to check it regardless. 

Here is how you can disable the Screen Curtain on the Watch application of your iPhone. 

  1. Click on the “General” tab and head to “Accessibility“.
  2. Locate and select the “VoiceOver” category.
  3. Disable the button switch for the VoiceOver feature if you don’t want to use it.
  4. Scroll down and tap the “Screen Curtain” to turn it off.

Once done, you will be able to see your screen turn on. If that does not happen, consider performing a hard reboot

Reason #3: No Battery

Another prevalent cause of this issue is low power. Your Apple Watch can go into Power Reserve mode, but even that has its limits and can run out. If you haven’t charged your Apple Watch yet, this might be why your device is not turning on. 

Luckily, the Apple Watch is also designed to factor power loss into its issue mitigation system. Therefore, all you need to do is connect it with the default charger, and it should be up and running in no time!


If your Apple Watch smells even a tiny bit during the charging process, then you should disconnect it as soon as possible. Lithium-ion batteries can puff up in some instances, and further charge can cause them to explode.

Reason #4: Hardware Related Issues

Black Apple Watch

Your Apple Watch is designed to factor the day-to-day wear and tear. However, specific incidents can be too much for the poor fellow to handle. For example, you might’ve bumped it to a surface too hard without knowing. While it doesn’t happen often, the risk is still there. 

It can also be due to a surge in electrical charge due to a faulty charger. This can, in most cases, cause the device to cease functioning. However, the issue can be as simple as a small node burning on the logic circuit. 

Regardless of the cause, we recommend you send it to AppleCare+ if such an issue occurs. While you could try to tinker with it on your own, you’ll most likely achieve nothing and would void your warranty as well.

Unless you’re reasonably familiar with the repairing and tinkering of electronics, it’s better if you let the professionals handle the job. 

Recommended Solution

Apple devices aren’t very open to the self-repair notion, so most issues require you to visit your nearest Apple Service Center quickly. Furthermore, a subscription to AppleCare+ will get your faulty device replaced free of cost. 

However, it won’t be covering any water damage, so refrain from taking it to the pools as much as possible. 


The technology used in the latest Apple Watch shouldn’t account for any issues with turning the device on. However, if it happens, you should follow the mentioned steps for troubleshooting. You should also contact your nearest Apple Service center instead of tinkering with the device by yourself in the case of failure.

Leave a Comment

Your email address will not be published. Required fields are marked *