---
title: "Wi-Fi Dead Spots: Test Each Room, Then Move the Router"
description: "Find your Wi-Fi dead spots with a speed test in every room, then try a better router spot and compare. Plus when the other band, a cable or mesh helps."
url: https://devicetests.com/wifi-dead-spots
language: en
---

# Wi-Fi Dead Spots: Test Every Room and Find the Best Place for Your Router

By Eric Buchanan · Published November 6, 2026

Short answer

Run a speed test a few steps from your router, then in every room where you use the internet: same device, same spot you sit. Rooms that are much slower, lag more, drop or can’t connect are your weak spots and dead spots. Fix them in this order: move the router to a central, raised, open spot, try the other band, use a cable for things that stay put, and only then add a mesh point or access point.

## Walk the house with a speed test

You don’t need an app. Our speed test runs in the browser on any phone, tablet or laptop, and the [room log](https://devicetests.com/wifi-dead-spots#log-your-rooms) below keeps the results.

_A home from above with six rooms. The router sits on a shelf in the living room. A dashed orange route runs from a phone a few steps from the router through the living room, kitchen, office and two bedrooms, with a phone at each stop._

1. Start a few steps from the router, in the same room. This is your best case: every other room is compared with it.
2. The far side of the same room, where you sit.
3. The next room: the kitchen table, a desk, a bed.
4. A room two walls away.
5. Upstairs or the far end of the home.
6. Any spot where calls freeze or video stops loading. Test there even if it is not a room.

One route, one device, the spots where you really sit. Then the same route again after each change.

1. Use one device for the whole walk, the one that struggles most if you can. Phones and laptops get different speeds, so don’t mix them.
2. On a phone or tablet, turn mobile data off for the walk, and back on afterwards. Otherwise a weak room can quietly use mobile data: an iPhone or iPad does this with **Connectivity Assist**, says Apple.
3. Pause big downloads, game updates and video on the other devices. Otherwise one room looks slow just because someone started a film.
4. Stand a few steps from the router and run the speed test. Microsoft notes the strongest signal is usually a few feet from the router, not right next to it.
5. Walk to each room. Stand or sit where you really use the internet, with doors as they usually are. Run the test again. A result that surprises you? Run it once more.
6. Write down **Download** and **Ping**, or tap **Use my last speed test** in the room log. No connection at all? Tick **Couldn’t connect here**.
7. In a room where calls drop or video stops, also record a few minutes with the [stability test](https://devicetests.com/internet-stability-test) and add its drops. Record the same length in each room, say 10 minutes. Our speed test can’t see short drops.

Test it now

Internet speed test

It measures what you really get in that room: download, upload and ping from this device to our server. It doesn’t measure the router’s radio signal, and the result includes your internet line too.

[Open the speed test](https://devicetests.com/internet-speed-test)

**Download** is how fast data comes in, in Mbps: higher is better. **Ping** is how long a tiny message takes to reach our server and come back, in ms: lower is better.

![Our speed test result: Needs attention. Fast enough for HD video on 2 screens and video calls at the same time. Download 14 Mbps, upload 3.9 Mbps, ping 47 ms, jitter 3.8 ms.](https://devicetests.com/_astro/speed-test-far-room.ddxaaI61_v818z.webp)

A far room might look like this. Taken in Chrome's engine with the connection slowed down on purpose, not in a real home.

## Log your rooms

Add each room as you go. The log compares every room with the spot next to the router, lists the worst first and suggests your next move. It stays in this browser only: nothing is sent to us.

How the log rates each room, checked from the top down. The limits for speed and ping come from our [speed test](https://devicetests.com/internet-speed-test#how-to-read-your-results) and [ping test](https://devicetests.com/ping-test#how-to-read-your-results). The comparison with the router room is our own rule of thumb, not a standard, and it rates the connection, not the radio signal.

| Rating | When |
| - | - |
| **No connection** | You ticked **Couldn’t connect here**. |
| **Poor** | Under 5 Mbps (our speed test calls that standard-quality video), a ping of 100 ms or more, or any drop. |
| **Weak** | Less than half the speed next to the router **and** under 25 Mbps, or a ping 30 ms or more above the router room’s. |
| **Good** | Everything else. A ping you left empty isn’t checked. |

After a new round, a room counts as **better** or **worse** when its download changed by a quarter or more, or its ping by 30 ms or more. Speed tests vary a little from run to run, so smaller changes count as the same.

What does your log show?

- [Poor even next to the router](https://devicetests.com/why-is-my-internet-slow): Test on a cable first
- [Half your rooms or more are weak](https://devicetests.com/wifi-dead-spots#where-to-put-the-router): Move the router, then test again
- [One or two rooms weak, the rest good](https://devicetests.com/wifi-dead-spots#try-the-other-band): Try the other band and a small move
- [A room with no connection at all](https://devicetests.com/wifi-dead-spots#when-moving-the-router-isnt-enough): A cable, a mesh point or an access point
- [Every room is good, one device still struggles](https://devicetests.com/wifi-keeps-disconnecting#only-one-device-drops): Start with that device
- [Good speed, but calls still freeze](https://devicetests.com/internet-stability-test): Record drops with the stability test

## Where to put the router

Router makers agree on the basics: central, raised and in the open. Google says off the ground and in plain view, like on a shelf, at eye level if you can. Microsoft warns that a corner or a spot under a desk weakens the signal.

_The same home from above, twice. Left: the router sits in a cupboard in a corner, a fish tank stands in the way, and the far room has a crossed-out Wi-Fi symbol. Right: the router is near the middle, two orange circles of reach cover the home, and every far room shows Wi-Fi._

1. In a corner cupboard, on the floor: much of the signal goes into the outside wall and the cupboard.
2. Water and metal in the way: a fish tank, a fridge, a metal cabinet.
3. The far corner gets nothing: a dead spot.
4. Near the middle, raised and in the open: the reach is shared by every room.
5. The far rooms are now in reach.

Same home, same router. Only its place changed.

| Do | Avoid |
| - | - |
| Near the middle of the home, or of the rooms you use most (NETGEAR, Google, Microsoft). | A corner, an outside wall, or the far end of the home. TP-Link says an outside wall weakens the signal on the other side of the home. |
| Off the floor, on a shelf or a TV stand (Google). | The floor, under a desk, inside a cupboard or cabinet. |
| In the open, with few walls between it and the rooms you use. | Basements, attics and closets (NETGEAR). |
| Away from other electronics. | Microwaves and baby monitors (NETGEAR), cordless phones (Microsoft, Apple), TVs and metal TV mounts (TP-Link). |

Some materials let Wi-Fi through much better than others. Apple ranks them:

| What’s in the way | How much it weakens Wi-Fi |
| - | - |
| Wood, glass, most plastics | Low |
| Water (a fish tank), brick, marble | Medium |
| Plaster, concrete | High |
| Metal: a filing cabinet, a fridge, a metal-framed mirror | Very high |

> Router with antennas?
>
> An upright antenna sends its signal out sideways, says NETGEAR. For one floor, TP-Link says to point them straight up. For two floors, angle one or mix upright and sideways: TP-Link suggests about 30 degrees.

### Run the placement test

You don’t have to guess. Move the router, then walk the same route again.

1. Keep your first round in the room log. Tap **New round after a change**: your rooms stay, and the results move to **Before**.

2. Change one thing, then test. Move the router to a better spot, or lift it onto a shelf.

   - **A separate modem and router:** a longer network cable between them lets the router move further. The modem stays by its wall socket.
   - **One box from your provider** (modem and router in one): it has to stay near the phone, cable or fibre socket. Lift it, take it out of the cabinet or turn it. If that isn’t enough, see [when moving the router isn’t enough](https://devicetests.com/wifi-dead-spots#when-moving-the-router-isnt-enough).

3. Wait until the router’s lights show it’s online again.

4. Run the speed test in the same spots, with the same device. The log shows each room’s new rating next to **Before**.

5. Keep the spot that helped most. If nothing helped, go on to the next section.

Can’t move it at all, for example in a rented flat? A small change may still help: lift it onto a shelf, take it out of the cabinet, or turn it so no metal stands in front of it. In a block of flats, the neighbours’ Wi-Fi may slow yours too: see the [questions below](https://devicetests.com/wifi-dead-spots#questions-people-ask).

## Try the other band

Most routers send Wi-Fi on two or three bands, often under one name. Your device picks one, and it doesn’t always pick well at the edge of your home.

| Band | Reach | Speed | Good for |
| - | - | - | - |
| **2.4 GHz** | Longest, and best through walls | Slowest | Far rooms, smart plugs and cameras |
| **5 GHz** | Shorter, weaker through walls | Faster | Rooms near the router |
| **6 GHz** (Wi-Fi 6E and 7) | Shortest | Fastest | Near the router. Needs a router and device that support it |

The table follows Microsoft’s band comparison. NETGEAR adds that a Wi-Fi 6E router must sit close to where you want the 6 GHz speed.

1. If your router lets you, give the 2.4 GHz band its own name for the test: [how to split the bands](https://devicetests.com/how-to-change-the-router-to-2-4-ghz). Some mesh systems manage the bands for you and have no such setting; then skip this section.
2. In the weak room, join the 5 GHz name and run the speed test, then the 2.4 GHz name and run it again. On a Mac you can check the band: hold Option and click the Wi-Fi icon in the menu bar, and the details show the channel and band.
3. Keep whichever band gives the better result in that room. 2.4 GHz reaches further but is slower.
4. Afterwards, go back to one name for all bands. Apple recommends one name, and says separate names can make connections less reliable.

## Check the signal on your device

Our tests show what you get in a room: the speed, the ping and the drops. Your device can also show how strong the router’s signal is there. The two answer different questions, and both help.

### Our speed and stability tests

What you get

Download, ping and drops, from your device to our server. Includes everything on the way: the Wi-Fi, the router and your internet line. Works on every device, but can’t tell a weak signal from interference.

### Your device's signal reading

How strong the router sounds

How loudly the router’s radio arrives, as bars, a percentage or dBm. Says nothing about speed: a full signal can still be slow if the line or a busy channel is the limit.

### Windows

Open **Command Prompt** and type `netsh wlan show interfaces`, then press Enter. Microsoft lists this command for Wi-Fi troubleshooting. Look for the **Signal** line, a percentage, and run it again in each room. Windows measures signal quality as a percentage where 100% is −50 dBm or stronger and 0% is −100 dBm, so 50% is about −75 dBm.

For the connection’s details without a command, open **Settings**, **Network & internet**, then **Properties** next to your Wi-Fi.

### Mac

Hold Option and click the Wi-Fi icon in the menu bar. Apple says the details under your network include the channel and the band. For a deeper look, choose **Open Wireless Diagnostics** in that same menu.

### iPhone and iPad

An iPhone or iPad shows only the bars in the Wi-Fi icon, in the status bar and in **Settings**, **Wi-Fi**. Watch whether they drop as you walk the route. The speed test is the better measure here.

### Android

Open **Settings** **Network & internet** **Internet**. Google says your network’s signal strength is shown on its Wi-Fi icon: a fuller icon means a stronger signal. Names differ on Samsung and other phones.

What the dBm numbers mean: closer to zero is stronger, so −50 dBm is strong and −80 dBm is weak. There’s no official “good” line, but makers give hints:

- Below this, an iPhone or iPad starts looking for a better access point (Apple)

  −70 dBm

- The same point for a Mac (Apple)

  −75 dBm

- A Google Wifi point that averages weaker than this over a day gets a "Move" tip in the Google Home app

  −77 dBm

## When moving the router isn’t enough

Some homes are too big, too long or too solid for one router. Pick the fix by what’s in the weak room.

| Fix | Best for | Where it goes |
| - | - | - |
| **A network cable** | A TV, computer or games console that never moves. Best for online games. | Straight from the router. Steadier than any Wi-Fi. |
| **Mesh Wi-Fi** | Several weak rooms or floors. NETGEAR and TP-Link call it the choice for whole-home coverage. | Points about halfway, no more than 2 rooms from the router or another point (Google). |
| **An access point on a cable** | A far room where you can run a cable. | In the weak room, connected by cable. A spare router can do it: [set it up as an access point](https://devicetests.com/how-to-bridge-a-tp-link-router). |
| **A range extender** | One weak spot in a smaller home or flat (NETGEAR, TP-Link). | About halfway between the router and the weak spot (TP-Link). Not in the dead spot itself. |
| **Powerline adapters** | Rooms that are hard to wire. TP-Link suggests them there. | One by the router, one in the weak room, on wall sockets. |

_A row of four rooms, twice. Top: a wireless mesh point sits in the far room, and the dashed link to the router is crossed through. Bottom: the point sits in the third room, joined to the router by a solid line, and orange arcs of reach cover the far room, which shows Wi-Fi._

1. A point inside the dead spot hears the router badly itself.
2. So the link back to the router is weak, and everything through it is slow.
3. About halfway, no more than two rooms from the router, the point still hears it well.
4. From there, its own Wi-Fi reaches the far room.

A wireless mesh point or extender needs a good link to the router. Halfway beats the dead spot itself. A point on a cable can go in the far room.

> A cable between mesh points beats Wi-Fi
>
> Many mesh systems can join their points with a network cable. TP-Link says that link uses none of the Wi-Fi your devices share, with lower latency. It’s worth it in homes with thick walls or several floors.

Before you test again, tap **New round after a change** in the log, then walk your route. Already have mesh? Check where your points are first: about halfway, no more than two rooms apart. Mesh apps check their own links too: the Google Home app has **Test mesh** under Wi-Fi and Points, and TP-Link’s Deco app shows each unit’s signal, with 2 bars recommended.

Fixing it for a smart plug, camera or printer? Our tests run on your phone or laptop. Finish by using the device itself in that spot: many smart devices use 2.4 GHz only.

## Questions people ask

**How do I find Wi-Fi dead spots without an app?**

Run a speed test in each room with the same device, starting a few steps from the router. Rooms with less than half the router room’s speed, a much higher ping or no connection are your dead spots. The [room log](https://devicetests.com/wifi-dead-spots#log-your-rooms) on this page ranks them for you.

**Should the router be upstairs or downstairs?**

Near the middle of the home, counting the floors. In a two-storey home, TP-Link advises high up on the ground floor. It warns against the basement: from there the signal has to go through two floors instead of one. Test both spots if you can.

**Why is the Wi-Fi bad in just one room?**

Usually walls, a floor or something big in the way: metal, concrete, water. Try the router a little closer to that room or with fewer walls between, then test the other band there. A device that stays in that room is best on a cable.

**Is mesh better than an extender?**

For a whole home, usually. NETGEAR and TP-Link call extenders a cheaper fix for one weak spot or a smaller home, and mesh the choice for several rooms or floors. Either one needs a good link to the router, so place it halfway, not in the dead spot.

**Does 5 GHz go through walls?**

Not as well as 2.4 GHz. Microsoft and TP-Link both say 5 GHz is faster but reaches less far, and 6 GHz less far still. In a far room, 2.4 GHz may be the one that works.

**Full Wi-Fi bars, but the internet is still slow?**

Full bars don’t promise a fast connection. Test next to the router and on a cable: if it’s slow there too, see [why the internet is slow](https://devicetests.com/why-is-my-internet-slow). If calls lag only when someone downloads, try the [bufferbloat test](https://devicetests.com/bufferbloat-test).

**Can my neighbour's Wi-Fi cause dead spots?**

It can slow your Wi-Fi: Microsoft calls 2.4 GHz more crowded than 5 GHz. A dead spot, though, usually comes from walls and distance. If you have more than one router of your own, Apple advises giving each its own channel.

**Does our speed test map the signal like a heatmap app?**

No. It measures what you really get in each room, which is what you notice. It can’t see the radio signal itself. For that, use the [signal reading on your device](https://devicetests.com/wifi-dead-spots#check-the-signal-on-your-device) as well.

## Sources

- [Microsoft: Wi-Fi and your home layout (placement, 2.4, 5 and 6 GHz, extenders)](https://support.microsoft.com/en-us/windows/wi-fi-and-your-home-layout-e1ed42e7-a3c5-d1be-2abb-e8fad00ad32a)
- [Microsoft Learn: Wireless network connectivity troubleshooting (netsh wlan show interfaces)](https://learn.microsoft.com/en-us/troubleshoot/windows-client/networking/wireless-network-connectivity-issues-troubleshooting)
- [Microsoft Learn: Wi-Fi signal quality in Windows (0% = -100 dBm, 100% = -50 dBm)](https://learn.microsoft.com/en-us/windows/win32/api/wlanapi/ns-wlanapi-wlan_association_attributes)
- [Microsoft: Essential network settings and tasks in Windows (Properties of your network)](https://support.microsoft.com/en-us/windows/essential-network-settings-and-tasks-in-windows-f21a9bbc-c582-55cd-35e0-73431160a1b9)
- [Apple: Resolve Wi-Fi and Bluetooth issues caused by wireless interference (materials, interference sources)](https://support.apple.com/en-us/HT201542)
- [Apple: About Connectivity Assist (iPhone and iPad add mobile data when Wi-Fi is poor)](https://support.apple.com/en-us/127686)
- [Apple: Use Wireless Diagnostics on your Mac](https://support.apple.com/guide/mac-help/use-wireless-diagnostics-mchlf4de377f/mac)
- [Apple: Use the Wi-Fi status menu on Mac (Option-click for channel and band)](https://support.apple.com/guide/mac-help/use-the-wi-fi-status-menu-on-mac-mchlfad426fa/mac)
- [Apple: Wi-Fi roaming support in Apple devices (-70 and -75 dBm)](https://support.apple.com/guide/deployment/wi-fi-roaming-support-dep98f116c0f/web)
- [Apple: Recommended settings for Wi-Fi routers and access points](https://support.apple.com/en-us/102766)
- [Google: Where to place your Wifi devices (central, off the ground, points halfway and no more than 2 rooms apart, -77 dBm)](https://support.google.com/googlenest/answer/7183150)
- [Google: Test the connection between your Wifi points (Test mesh)](https://support.google.com/googlenest/answer/7620337)
- [Google: Connect to Wi-Fi networks on Android (signal strength on the Wi-Fi icon)](https://support.google.com/android/answer/9075847)
- [NETGEAR: How do I resolve poor wireless range or a weak WiFi signal (KB 25182)](https://kb.netgear.com/25182/How-do-I-resolve-poor-wireless-range-or-a-weak-WiFi-signal-from-my-NETGEAR-router)
- [TP-Link: Router antenna position and placement guide (FAQ 455)](https://www.tp-link.com/us/support/faq/455/)
- [TP-Link: How to improve your Wi-Fi signal and wireless range (FAQ 468)](https://www.tp-link.com/us/support/faq/468/)
- [TP-Link: Where to place your Wi-Fi router for the best signal](https://www.tp-link.com/us/blog/2480/where-to-place-your-wi-fi-router-for-the-best-signal/)
- [TP-Link: Ethernet backhaul for Deco (FAQ 1794)](https://www.tp-link.com/us/support/faq/1794/)
- [TP-Link: Deco placement guide (FAQ 1446)](https://www.tp-link.com/us/support/faq/1446/)

## Test it yourself

Check your own device with a free test. It runs in your web browser.

- [Internet speed test](https://devicetests.com/internet-speed-test): Measure your download and upload speed.
- [Internet stability test](https://devicetests.com/internet-stability-test): Record your connection for hours and see when it drops.
- [Ping test](https://devicetests.com/ping-test): Measure how fast your connection responds.
