PC AccessoriesController

How To Reset Xbox One Controller

Xbox One Controller

Whether you’ve just purchased a new Xbox One or you’re playing with your old one, you might have run into the problem of your controller not working correctly. Your Xbox One controller can often stop working, and you don’t know why.

Quick Answer

If your Xbox One controller is not behaving as it should, you might need to reset it. It’s not possible to reset your controller directly, but you can try power cycling your controller or hard resetting your console to erase the cache and fix possible issues.

Xbox One controllers are great, but they can sometimes be a little finicky. If you’ve got one that’s acting up, there’s a simple fix: resetting it! Resetting your Xbox One controller will reset all of its settings to their default values and should fix any problems you’re experiencing.

If you’re having a problem with your Xbox One controller and want to fix it, you can do so by using the following methods.

Method #1: Power Cycling the Controller

You can fix many Xbox One controller-related issues by power cycling the controller. Power cycling is merely the term Xbox official support uses to describe rebooting an Xbox controller. This consists of turning off your controller, then turning it on again.

Power cycling the controller will refresh and restore all inputs, buttons, and sensors to their initial settings.

Following these steps will help you power cycle your Xbox One controller and resolve any issues it may have.

  1. Press and hold the Xbox button on your controller for 10-15 seconds until the controller powers off.
  2. Remove the batteries from your controller.
  3. Wait for 10-15 seconds before doing anything.
  4. Put the batteries back into the controller.
  5. Press and hold the Xbox button again to turn on the controller.

By doing this, you will be able to resolve any issues with your controller and get it back in working order.

Method #2: Hard Resetting the Controller

Suppose you’re having trouble with your Xbox One controller, and all the available troubleshooting steps have been exhausted. In that case, as a last resort, you can also hard reset your Xbox One console in hopes of fixing your controller issue.

This will clear out any in-game junk files, cache, or temporary files and give it a fresh start.

You can hard reset your Xbox One console using the following steps and resolve any controller issues.

  1. Power off your controller before you attempt to hard reset your console.
  2. Press and hold the Xbox button on the console for about 5-10 seconds to turn off your console.
  3. Take out the power cord from the back of your Xbox one console.
  4. Wait at least 30 seconds to let all the electrical charge out.
  5. Plug the power cord back into your console.
  6. Press the Xbox button on the console again to power it back on.
  7. Connect your Xbox One controller to the console using a USB cable to sync it automatically.

That’s it. After hard resetting your Xbox One console and connecting your controller via USB, you’re good to go. 

Method #3: Other Ways To Fix the Controller

If you have tried the above methods, and it still does not seem to be working properly, other causes could be at play. Often, issues are caused by faulty controllers, outdated firmware, low or dead batteries, or poor wireless connections

We’ve put together a list of other possible solutions below that you can use and try to fix your Xbox One controller.

  • Update the firmware of your Xbox One’s controller and the console itself.
  • Charge the batteries or buy a pair of new ones if you suspect the old ones are dead.
  • Try connecting the controller using a USB cable instead of doing it wirelessly.
  • Ensure that your Xbox One controller is compatible with the console.

If none of these methods work, it’s probably time to buy a new controller. Most likely, the problem is with the hardware, and you’ll have to buy a new one to resolve it.

Conclusion

You can use this guide to reset your Xbox One controller’s factory state, so it feels and performs like new. By following these simple steps, you’ll be able to get your controller back up to snuff in no time!

Frequently Asked Questions

How do you resync an Xbox One controller?

Press the sync button on your console, then the sync button on your controller, and wait for the sync process to complete.

How do I fix an unresponsive Xbox One controller?

Hold the Xbox logo button on the controller for about 5 seconds to turn it off, then press it again to turn it back on.

Leave a Comment

Your email address will not be published. Required fields are marked *