3D viewer

Open a 3D file, turn it around and check its size before you print it.

Your 3D files stay on your device. They are opened in your browser and never uploaded.

STL, OBJ, GLB, glTF, 3MF, PLY and FBX files.

Does the model have textures or a material file? Choose all its files together.

Or drop files here.

Quick start

  1. Press Choose a 3D file and pick your model.
  2. Drag the model, or use Turn left and Zoom in, to look around it.
  3. Read its size and the printing check under About this model.

How to read your results

When your model opens, you can turn it around in the view. Under About this model, the viewer lists what it found in the file.

What you see What it means
Triangles Every 3D model is made of flat triangles. More triangles mean finer detail and a bigger file. A 3D scan without a surface shows Points instead.
Size (width × depth × height) The size of a box that the whole model just fits in, in the file’s unit. Under it, the same size in inches or millimetres.
The file’s numbers are in STL, OBJ and PLY files don’t say their unit. Pick the one the file was made in. The sizes change, the model doesn’t.
Volume The space the model’s surface encloses. 1 cm³ is 1 ml. A print usually uses less material, because slicers fill the inside with a pattern; your slicer works out the material. It only shows for a closed surface whose triangles face the right way.
Surface area The area of all the model’s outside, added up.
Pieces Shows when the file holds separate pieces that don’t touch, such as the parts of a kit.
Ready for 3D printing? Closed surface (watertight) means a slicer can fill it. Holes or gaps are places where the surface is open. Edges shared by more than two triangles are places where parts touch in a way slicers can’t follow.

Wireframe shows the triangles as lines, so you can see how detailed the model is. Background switches between a light and a dark background, which helps with very light or very dark models. Save picture saves the view as a PNG picture.

More ways to look, under the buttons, has buttons that move the model sideways, buttons that look straight from the front, the side or the top, and Which way is up in the file. 3D printing files have Z up and games and glTF files have Y up. Change it if the model lies on its side.

Tip: Drag to turn, right-drag or Shift + drag to move, and scroll to zoom. On a touch screen, use one finger to turn and two fingers to move or zoom. The buttons under the view do the same, for anyone who can’t drag. With a keyboard, select the view and use the arrow keys to turn, Shift and the arrow keys to move, + and − to zoom, and 0 to reset.

If something’s wrong

The model looks tiny or huge

The file doesn’t say its unit, and the viewer guessed millimetres. Change The file’s numbers are in to centimetres, metres or inches. Files from Blender and many game apps use metres.

The model lies on its side

The file uses another up direction than its format usually does. Open More ways to look and change Which way is up in the file.

The model is grey, without its colours or textures

  1. An OBJ file keeps its colours in a separate .mtl file, and textures in picture files. Press Choose another file and select the .obj, the .mtl and the pictures together.
  2. A glTF file may need its .bin file and pictures. Choose them all together, or use the single-file GLB version.
  3. STL files have no colours. That’s normal.

“This model needs files you didn’t choose”

The model points to other files by name. Find them in the same folder as the model, then choose all of them together. On a phone, unzip the download first.

The page reloads or says the device ran out of memory

Very big models need more memory than many phones and tablets have. Close other apps and tabs, then try again. If it still fails, open the file on a computer, or ask for a lighter version of the model.

It says “Your browser can’t draw 3D right now”

The browser’s 3D drawing (WebGL) is turned off, blocked or not supported by the graphics chip. Turn on hardware acceleration in your browser’s settings and restart the browser. The GPU test shows what your browser supports.

It says the surface isn’t closed

The model has holes or gaps, often from a scan or a model made for games. Many slicers repair small gaps by themselves, but bigger holes can print wrong. Use the repair tool in your slicer or a mesh editor, then check the file again here.

I can’t find my file on an iPhone

Downloads from Safari go to the Files app, in the Downloads folder. Press Choose a 3D file, then Choose File in the menu that opens. Press Browse and open Downloads. Files from email or messages need to be saved to Files first.

How this tool works

The viewer reads the file in your browser, on your device. STL, OBJ and PLY files are read in the background, so the page stays responsive. GLB, glTF, 3MF and FBX files are read by the page itself, because their pictures need it. Nothing is uploaded, and no part of the file leaves your device.

It draws the model with WebGL, the browser’s built-in 3D graphics, using the open-source three.js library. A model without colours is drawn in plain grey, lit from where you look at it.

The printing check joins triangle corners that sit in exactly the same place, then counts how many triangles share each edge. Each edge of a closed surface is shared by exactly two triangles. It doesn’t look at wall thickness, overhangs or surfaces that cross each other, so it can’t promise a good print.

What it can’t do:

  • It can’t open CAD files (STEP, IGES, DWG) or USDZ, Blender and SketchUp files.
  • It doesn’t measure between two points, cut the model open, repair it or convert it to another format.
  • Very big models (millions of triangles) may be too big for a phone’s memory. On phones, the printing check is skipped above 1.5 million triangles, and on computers above 5 million.

Questions and answers

Are my files uploaded?

No. Your files are opened in your browser, on your own device, and never sent to us or anyone else. Even the picture you save is made on your device.

Which files can it open?

STL (both kinds: binary and text), OBJ with its .mtl material file and textures, GLB and glTF (also with Draco or meshopt compression), 3MF, PLY (meshes and 3D scans) and FBX.

It can't open CAD files such as STEP, IGES or DWG, or USDZ, Blender and SketchUp files. Save them as STL, 3MF, GLB or OBJ from the app that made them.

Microsoft 3D Viewer is gone. Can I use this instead?

Yes. Microsoft removed 3D Viewer from the Microsoft Store in July 2026, and Paint 3D in 2024. This page opens the same kinds of files in any browser, on Windows, Mac, Chromebooks, phones and tablets, with nothing to install.

What units does an STL file use?

None. An STL file only holds numbers, without saying whether they are millimetres or inches. Files for 3D printing almost always use millimetres, so the viewer starts there.

If the size looks wrong, for example a 2 mm figure that should be 20 cm tall, change The file's numbers are in to the unit the file was made in. OBJ and PLY files work the same way. 3MF files say their unit, and glTF files always use metres.

Does "closed surface" mean my model will print well?

It means a slicer can tell the inside from the outside, which it needs to fill the model. It doesn't check walls that are too thin to print, overhangs that need supports, or parts that cross each other. Your slicer's preview shows those.

Can I open a 3D file on an iPhone or Android phone?

Yes. Press Choose a 3D file and pick the file from Files (iPhone) or your downloads (Android). One finger turns the model, two fingers move it, and pinching zooms.

Phones have less memory than computers, so very big files (over 100 MB) may not open. The viewer warns you first.

Can I measure between two points or cut the model open?

Not yet. The viewer gives the overall size, the volume and the surface area. For measuring points, use your slicer or CAD app.