Gyroscope test

Check your phone's gyroscope, accelerometer and compass, with a bubble level.

Your sensor readings stay on your device. We don't record or upload them.

Quick start

  1. Open this page on the phone or tablet you want to test.
  2. Press Start sensor test. On an iPhone or iPad, tap Allow.
  3. Turn and tilt the phone, then hold it flat and turn round.
  4. Press Show my result to see what works.

How to read your results

The test lists three sensors. Each one counts as working only after it has answered a move.

Sensor What it does How to check it
Gyroscope Feels how fast the phone turns. Games, photo spheres, AR and steady video use it. Turn the phone quickly in your hand.
Accelerometer Feels gravity and shakes. Auto-rotate, the step counter and the level use it. Tilt the phone.
Compass Feels the Earth’s magnetic field. Maps use it to show which way you face. Hold the phone flat and turn round slowly.

Each sensor shows one of these words:

Word What it means
Works It answered when you moved the phone.
Check It sends readings, but you haven’t moved the phone enough yet to prove it answers.
Problem No readings came, or it didn’t change when the phone tilted.
Waiting The test hasn’t heard from it yet.

Check while still measures for 5 seconds while the phone lies on a table. At rest, gravity should read about 9.8 m/s². The gyroscope should read almost no turning: under 0.5° a second is normal, over 2° a second is a lot of drift. The compass should hold its heading within 5°.

The Bubble level works lying flat, as a round level, or standing on an edge, as a long level. The bubble moves to the higher side. “Level” shows within 0.2°.

Tip: For a true level, press Calibrate. Mark one spot, turn the phone round on the same spot, and mark again. The test then knows the phone’s own error, and the surface’s tilt.

If something’s wrong

These are the most common fixes, easiest first.

Nothing happens, or “No motion sensors found”

  1. Open this page on your phone or tablet. Most computers have no motion sensors.
  2. On an iPhone or iPad, press Start sensor test, then tap Allow.
  3. In Chrome on Android, tap the icon left of the address, then Permissions. Turn on Motion sensors.
  4. Turn off battery saver, and close and reopen the browser.
  5. Try another browser, such as Chrome or Samsung Internet.

The gyroscope shows “No readings”

Many low-cost phones have no gyroscope. Look up your model’s specifications. If it should have one, restart the phone and test again. If it still sends nothing, the sensor or its connection may be faulty.

A sensor “didn’t answer when the phone tilted”

The other readings changed a lot, but this sensor stayed the same. Restart the phone and test again. If it happens again, the sensor is likely faulty. This often follows a drop, water, or a screen or board repair.

The compass points the wrong way

  1. Take off any case with a magnet, a MagSafe wallet or a metal ring.
  2. Move away from metal, speakers, laptops and cars.
  3. Move the phone in a slow figure 8 a few times. This calibrates it.
  4. On an iPhone, check that Compass Calibration is on, in Settings, then Privacy and Security, Location Services, System Services.
  5. In Google Maps on Android, tap the blue dot, then Calibrate.

The level is off on a flat table

A case with a bump, or a camera that sticks out, tilts the phone. Take off the case, or press Calibrate and follow the steps.

The screen won’t turn

Check the rotation lock first. On an iPhone, open Control Centre and turn off Portrait Orientation Lock. On Android, pull down the quick settings and turn on Auto-rotate. If the accelerometer here works but the screen still won’t turn, restart the phone.

Your phone’s own test

Phone Where to find it
Samsung Galaxy Open the Phone app and dial *#0*#, then tap Sensor. This works on many Galaxy models, not all.
iPhone There is no sensor test menu. Use this page, and the Compass and Measure apps.

How this test works

Your browser shares the motion sensors with web pages through two events. One gives the phone’s tilt and, on many phones, its compass heading. The other gives the turning speed from the gyroscope and the pull from the accelerometer, about 60 times a second.

A sensor counts as working when its reading changes as you move: a turn faster than 30° a second for the gyroscope, and a change of 2 m/s² for the accelerometer. The compass counts once its heading has moved 20°. If the phone tilts more than 45° and a sensor stays the same, the test says it didn’t answer.

The bubble level uses the tilt angles, which every browser reports the same way. Calibration takes the middle of two readings, turned 180° apart. That cancels the phone’s own error.

See how we test phones and computers for where our limits come from, and what a browser can’t measure.

What the test can see

  • Whether each sensor sends readings, and whether they change when you move.
  • The tilt to about a tenth of a degree, the turning speed and the heading.
  • Drift and the size of gravity while the phone lies still.

What it can’t see

  • The sensors’ factory accuracy. Browsers smooth the readings first.
  • The strength of the magnetic field, so it can’t measure interference directly.
  • The proximity sensor, the light sensor and the barometer.

Questions and answers

Why does my iPhone ask, and my Android phone doesn't?

iPhones and iPads ask before any website can read the motion sensors. Tap Allow. Android phones share them without asking, unless you blocked Motion sensors in the browser's site settings.

If you tapped Cancel on an iPhone, close the browser fully and open the page again. Your phone asks once more.

Why does nothing happen on my computer?

Most computers have no motion sensors, so there is nothing to read. Some 2-in-1 laptops and Windows tablets have them and work here. Otherwise, open this page on your phone.

How accurate is the bubble level?

A phone level is usually right to within a few tenths of a degree. A bump in the case, or a camera that sticks out, can tilt the phone more than that.

Use Calibrate for the best reading. For building work, use a real spirit level.

Does the compass point to true north?

Phones may show magnetic north or true north, depending on the phone and its settings. The two differ by a few degrees in most places. For hiking or sailing, use a real compass with a map.

Can this test the proximity or light sensor?

No. Browsers don't let websites read them. Your phone's own test menu can, on some phones. See "Your phone's own test" above.

My phone has no gyroscope. Is it broken?

Not always. Many low-cost phones are made without one. The screen still turns, and the level works, because the accelerometer does that. But games, photo spheres and AR can't follow your turns.

Does this site record how I move?

No. The readings are only used on this page while it is open. If you calibrate the level, that small correction is kept in your browser for next time.