MP4 to MP3 converter

Take the sound out of a video and save it as an MP3 or WAV file.

Your video stays on your device. The sound is taken out in your browser and never uploaded.

MP4, MOV, WebM and other videos from a phone, camera or computer. Audio files work too.

You can also drag a file onto this box.

Save as

MP3 plays on every phone, computer and car, and keeps files small.

Kbps means kilobits per second. More sounds better and makes a bigger file.

Up to about 25 minutes of sound on a phone or tablet, and about 2 hours on a computer.

Quick start

  1. Press Choose a video and pick the video.
  2. Under Save as, keep MP3 or choose WAV.
  3. Press Convert to MP3, then Save MP3.

How to read your results

After you choose a video, the tool shows its name, how long the sound is, and whether it is stereo or mono. The waveform under Cut the start or end shows loud parts as tall bars and quiet parts as short ones.

What you see What it means
Video · 3:12.4, stereo The video’s sound is 3 minutes and 12 seconds long, with a left and a right side.
mono The video has one sound channel, often a phone call or a screen recording. The MP3 is mono too, which is right.
6 channels, mixed to stereo The video has surround sound (5.1). The MP3 gets a stereo mix of it.
Keeping 0:05.0 to 3:01.5 Only this part of the sound goes into the file. Keep everything undoes the cut.
Your MP3 file is ready: IMG_1234.mp3, 4.4 MB, 3:12.4 The new file’s name, size and length. Play it in the player before you save it.

What size will the file be?

Choice 1 minute of sound 5 minutes 1 hour
MP3, 128 kbps 1 MB 4.8 MB 58 MB
MP3, 192 kbps 1.4 MB 7.2 MB 86 MB
MP3, 320 kbps 2.4 MB 12 MB 144 MB
WAV, stereo, 48 kHz (most videos) 11.5 MB 58 MB 691 MB

Tip: On an iPhone or iPad, Save to Files puts the MP3 in the Files app, in Downloads. Share sends it to another app.

If something’s wrong

These are the most common problems, most likely first.

“This video has no sound”

The video file has no sound track. Screen recordings often have none, unless the microphone or the device’s sound was switched on while recording. Play the video in another app to check.

“Your browser can’t read the sound in this file”

  • Some videos use a kind of sound that a browser can’t read, such as AC-3 (Dolby Digital) in films or the sound in old camcorder files.
  • MKV files work in Chrome and Edge, often in Firefox, and often not in Safari.
  • Try another browser, such as Chrome on a computer. If it still fails, the file may be damaged: copy it again and try once more.

“Probably too long for this device”

The whole sound has to fit in your device’s memory. Close other apps and browser tabs, then press Try anyway. If the page reloads, use a computer, or cut the video into shorter parts first.

The MP3 is silent or very quiet

Check that the video has sound when you play it in another app. Flat, short bars in the waveform mean the sound in the video is quiet too. Use Play to listen before converting.

The saved file is not in my music app

The file goes to Downloads (on an iPhone or iPad: the Files app, in Downloads). Music apps don’t always see downloads. Open the file from the Files app, or add it to your music app yourself.

The file name has odd characters

Characters that aren’t allowed in file names are changed to _. Rename the file on your device if you like.

How this tool works

When you choose a video, your browser reads its sound with its own built-in decoders. These are the same ones it uses to play videos, so nothing extra has to be downloaded to read the file. The tool keeps your video’s own sample rate, so nothing is resampled when you save a WAV.

An MP4 is a box that holds a video and its sound (MP3 vs MP4 vs M4A explains this). From MP4 and MOV videos, the tool first copies the sound track out of the video, unchanged, and decodes only that. This is quicker for big videos, and it lets Safari read iPhone videos, whose sound it can’t always read inside the video file.

For an MP3, the tool then loads the free LAME MP3 encoder, about 130 KB, once. It runs in the background of your browser, so the page stays responsive, and it makes the MP3 a few seconds of sound at a time. The progress bar shows the real progress. A WAV needs no encoder: the sound is written as 16-bit samples.

What it can do

  • MP4, MOV, M4V, WebM and 3GP videos, and MKV in most browsers. Audio files work too.
  • Save the whole sound or a part, with fade in and fade out.
  • MP3 at 96 to 320 kbps (constant bit rate), or WAV (16-bit, the video’s own sample rate).
  • Stereo and mono sound; surround sound is mixed down to stereo.

What it can’t do

  • Download videos from websites, or read copy-protected videos.
  • Make the sound better than it is in the video.
  • Read every kind of sound in every browser: Safari can’t read some MKV and Ogg files.
  • Convert very long videos on a phone, because the whole sound must fit in memory.

See how we test file tools for what they do with your files, and what they can’t do.

Questions and answers

Is my video uploaded?

No. The tool runs in your browser, on your device. Your video is never sent to us or anyone else, so even a private or very large video is fine.

Like most websites, this page may load ads and statistics from other companies. They never get your video.

Which quality should I choose?

192 kbps is right for most videos: music sounds like the original and a 5-minute video makes a file of about 7 MB. Choose 128 kbps for talks, lessons and podcasts, or 320 kbps if you want the best and don't mind bigger files.

The MP3 can't sound better than the sound in the video. Phone videos usually have sound at about 128 to 256 kbps, so 320 kbps adds size but no quality.

Can I convert an iPhone video?

Yes. On the iPhone, press Choose a video and pick it from your photos. iPhone videos are MOV files with AAC sound, which every browser on the iPhone can read. To capture sound from an app first, see how to record internal audio on iPhone.

Since the iPhone 16, videos can also have a "Spatial Audio" track. The tool uses the normal stereo track that comes with it.

Can I keep only part of the sound?

Yes. Open Cut the start or end, then drag the two handles, or type the start and end times. Play lets you listen first. To cut out a short part, such as a ringtone, the audio trimmer has more choices.

Can I take the sound from a YouTube or TikTok video?

Only from a video file that is on your device. This tool doesn't download videos from websites. Many sites don't allow downloading, so check that you have the right to use the sound.

Should I choose MP3 or WAV?

MP3 for listening, sharing and phones: small files that play everywhere. WAV for editing in a music or video program: it keeps the sound as it is in the video (16-bit, like a CD), but the file is about 10 times bigger than an MP3.

How long can the video be?

About 25 minutes of sound on a phone or tablet, and about 2 hours on a computer. The whole sound is held in your device's memory while it is converted, so the limit depends on the memory. From MP4 and MOV videos only the sound is read, so the video file itself can be big. Other videos can be up to about 900 MB on a phone and 2 GB on a computer.

If a file is probably too long, the tool tells you before it starts, and you can try anyway.

Guides for this test