Scroll wheel test
Check that your mouse wheel scrolls the right way, every click.
Point at the box below and roll the wheel down slowly.
This test needs a mouse with a scroll wheel. Connect one by USB or Bluetooth, then roll its wheel over the box. A mouse works on most tablets and Android phones.
Roll the wheel hereSlowly, one click at a time
- Down
- 0clicks
- 0 of 10 checked
- Up
- 0clicks
- 0 of 10 checked
- Jumped back
- 0
- The wheel went the wrong way
- Last roll
- None yet
- Roll 10 clicks one way and compare
Your scrolling Keep rolling: we learn your wheel from the first few clicks.
Roll the wheel in the box to see each click here.
Quick start
- Point at the box and roll the wheel down slowly, one click at a time.
- Roll about 10 clicks down, then about 10 clicks up.
- Press Show my result to see if the wheel jumped back.
How to read your results
The Your last clicks strip shows each click as a mark, newest on the right.
| What you see | What it means |
|---|---|
| A line under the middle | One click down. A longer line is two or three clicks that came at once, because you rolled fast. |
| A line above the middle | One click up. |
| A red diamond | The wheel jumped back: one click went the wrong way while you rolled the other way. |
The numbers beside the box count your clicks.
| Number | What it means |
|---|---|
| Down and Up | Clicks you rolled each way, and how many were checked. A click is checked when the click before it came the same way, soon enough for a jump to show. Each way needs 10. |
| Jumped back | Clicks that went the wrong way. |
| Last roll | Clicks in your last roll one way. Use it to check for skipped clicks. |
Your result names what it saw, for example “Your wheel jumped back 3 times while you rolled down.” Two jumps or more point to dust or wear. One jump can be chance.
Tip: Roll slowly and steadily, about one to three clicks a second, without long stops. When you roll fast, the computer can merge clicks, and a jump can hide. When you stop for long, the test can’t tell a jump from a turn.
If something’s wrong
These are the most common fixes, easiest first.
The wheel jumps back now and then
- Unplug the mouse, or take out its battery.
- Blow compressed air into the gap around the wheel from a few sides, while you turn the wheel.
- Press Reset test and roll slowly again.
Dust in the part that senses the wheel is the most common cause, and cleaning often fixes it.
It jumps in one app or browser only
Then the mouse is probably fine. Some apps scroll in their own way. Test the mouse here in another browser. If it doesn’t jump here, check the settings of the app where it does. To be sure, the swap test checks the mouse, the computer and the app one at a time.
It jumps on another computer too
Then the mouse is most likely at fault. Try a fresh battery and move the receiver closer first, if it’s wireless. If the mouse is under warranty, contact the seller or the maker. Add your result to the claim.
It always scrolls the wrong way
That’s a setting, not a fault.
- Mac: open System Settings, then Mouse, and switch off Natural scrolling.
- Windows: look in the app from your mouse maker, such as Logi Options+, for a reverse or invert setting.
It skips clicks
- Roll exactly 10 clicks one way, counting the clicks you feel.
- Check that Last roll says 10. Try it two or three times.
- If it says fewer, put in a fresh battery and move the receiver closer, then clean the wheel as above.
It says your scrolling is smooth
You are using a touchpad, a Magic Mouse, a free-spinning wheel, or smooth scrolling in your mouse’s app. These send many small steps instead of clicks, so jumps can’t be judged. You can also say so yourself: turn on I’m testing a touchpad or a smooth wheel under the box.
- Free-spinning wheel: switch it back to clicks. On many Logitech mice, press the button behind the wheel.
- Smooth scrolling: turn it off in your mouse’s app, such as Logi Options+, then test again.
Cleaning didn’t help
The part that senses the wheel is most likely worn. Check the mouse on another computer first. A repair shop can replace it, but it needs soldering on most mice. Opening the mouse can end the warranty, so check that first. Otherwise, it’s time for a new mouse.
How this test works
This mouse scroll test listens to your browser. It tells the page each time the wheel turns, with the direction, the distance and the time. The test learns how far one click of your wheel goes, so it works with any scroll speed setting. Steps that come together are added up. On Windows and Linux, a wheel that sends several small steps per click counts as one click.
A jump is one click the wrong way (or two together), with at least two clicks the right way before it and one after. All of them must come less than one and a half seconds apart. Three clicks or more back in a row, or a long pause, mean you turned the wheel on purpose. That’s not a jump. A direction counts as checked after 10 clicks that came close enough together for a jump to show.
When the steps don’t line up into clicks, the scrolling is smooth: a touchpad, a Magic Mouse or a free-spinning wheel. Then we show your scrolling, but we don’t judge jumps.
See how we test mice and touchpads for where our limits come from, and what a browser can’t measure.
What the test can see
- Each click of the wheel, up and down, with its time.
- Clicks that go the wrong way.
- Whether your wheel scrolls in clicks or smoothly.
What it can’t see
- A click that sends nothing to the computer. Count your clicks with Last roll to find those.
- A jump hidden in very fast rolling, when the browser merges several clicks.
- Which way you turned the wheel. It only sees which way the page would scroll, after your settings.
Questions and answers
Why does my scroll wheel jump up when I scroll down?
Inside the mouse, a small part senses which way the wheel turns. When dust gets in, or the part wears out, it can read a click the wrong way. The page then jumps back for a moment.
Blowing compressed air into the gap around the wheel often fixes it. If it doesn't, the part is worn.
My wheel always scrolls the wrong way. Is it broken?
No. If every click goes the wrong way, it's a setting. On a Mac, Natural scrolling turns it around: open System Settings, then Mouse, and switch off Natural scrolling. On Windows, check the app from your mouse maker, such as Logi Options+, for a reverse or invert setting.
A broken wheel goes the wrong way only now and then.
How do I know if my wheel skips clicks?
Roll exactly 10 clicks one way, counting the clicks you feel. Then look at Last roll. If it says fewer than 10, some clicks may not have reached the computer. Try it two or three times, rolling steadily without long stops. No web page can see a click that sends nothing, so counting is the only way.
One jump showed up once. Is my mouse broken?
Not necessarily. A finger can slip, or you may have turned the wheel back a little. Roll about 10 more clicks that way, slowly. A dirty or worn wheel usually does it again.
Can I test a touchpad or a Magic Mouse?
You can see it scroll, but we can't judge it. A touchpad or a Magic Mouse scrolls smoothly, with no clicks, and it often moves back a little when you lift your fingers. That's normal, so we don't count it as a jump. Turn on I'm testing a touchpad or a smooth wheel under the box, so the test never judges it.
My mouse has a free-spinning wheel. Can I test it?
Switch the wheel back to clicks first. On many Logitech mice, press the button behind the wheel. A free-spinning wheel, or smooth scrolling in the mouse's app, sends many small steps, and those can't be judged the same way.
How do I change how far one click scrolls?
On Windows 11, open Settings, then Bluetooth and devices, then Mouse. Change "Lines to scroll at a time". On Windows 10, open Settings, then Devices, then Mouse.
On a Mac, open System Settings, then Mouse, and move the Scrolling speed slider. This changes the distance, not whether the wheel jumps.
Does this site record my scrolling?
No. The test only looks at your wheel on this page. Nothing is saved or sent.