Xbox controller test
Check every button, stick and trigger motor on your Xbox controller.
Connect your Xbox controller, then press any button on it
Your browser shows a controller to a page only after you press a button on it.
- USB: plug in a cable that carries data, not one that only charges.
- Bluetooth: hold the small pair button on the top until the Xbox button flashes fast, then choose Xbox Wireless Controller in your Bluetooth settings.
Works in Chrome, Edge, Firefox and Safari. Chrome and Edge on Windows or a Mac can also test the motors in the triggers.
On iPhone, iPad and Android, Xbox controllers with Bluetooth work.
Quick start
- Connect your Xbox controller by cable, Bluetooth or Xbox Wireless Adapter.
- Press any button on it, such as A.
- Press every button and move both sticks all the way round.
- When every button and stick has worked, the test says so. Press Show my result to see your result.
How to read your results
| What you see | What it means |
|---|---|
| A plain button | Not pressed yet. |
| A filled-in button | Held down right now. |
| A lightly coloured button | It worked. Your browser got the press. The list under the picture shows a tick next to it. |
| A dot in the middle | The stick rests in the centre. That is normal. |
| A dot outside the small ring | The stick rests outside the deadzone. Games may move by themselves: stick drift. |
The picture is an Xbox controller: the left stick sits above the d-pad, and the right stick below the A B X Y buttons.
Button names. The test uses the names Microsoft gives each part:
| Where it is | Its name |
|---|---|
| The four buttons on the right | A (bottom), B (right), X (left), Y (top) |
| The shoulder buttons | LB and RB (bumpers) |
| The triggers | LT and RT, from 0% to 100% |
| Pressing a stick down | Left stick and Right stick press |
| In the middle | View (left), Menu (right), the Xbox button on top, and Share on Series X|S controllers |
Your controller. Once your controller is connected, a box beside the picture names its model when your browser says it. It lists what this test checks on it and what a browser can’t read. The model number is also on the label inside the battery cover (on the back of an Elite Series 2), for example “Model 1914”.
| Model | Model number | Bluetooth | Motors in the triggers |
|---|---|---|---|
| Xbox Series X|S controller (2020) | 1914 | Yes | Yes |
| Xbox Elite Series 2 (2019) | 1797 | Yes | Yes |
| Xbox One controller with Bluetooth (2016) | 1708 | Yes | Yes |
| Xbox Elite controller (2015) | 1698 | No | Yes |
| Xbox One controller (2013) | 1537, 1697 | No | Yes |
| Xbox 360 controller | – | No | No |
Your result. When every button and both sticks have worked, the bar above the picture says so and shows the Show my result button. Press it and the result takes the place of the test. To test more, press Continue test: everything you tested is kept.
Tip: Not pressed yet doesn’t mean broken. It means the test hasn’t seen that button. Press it to check.
If something’s wrong
These are the most common problems with Xbox controllers, most likely first.
It won’t pair by Bluetooth
- Check that your controller has Bluetooth: see the table above.
- Turn on the controller with the Xbox button.
- Hold the small pair button on the top, next to the charging port, until the Xbox button flashes fast.
- On your device, open the Bluetooth settings and choose Xbox Wireless Controller.
If it was paired with an Xbox, it may connect to the console instead: turn the console off first. If it still won’t pair, update the controller in the Xbox Accessories app. An Xbox One controller with Bluetooth needs this update before it pairs with an iPhone or iPad.
Nothing happens on a computer
- Press a button on the controller. Browsers only show a controller after a button press.
- Try another cable. Many cables only charge and can’t carry data.
- Xbox One and Elite controllers without Bluetooth need a cable or the Xbox Wireless Adapter for Windows. A wireless Xbox 360 controller needs the Xbox 360 wireless receiver.
- Close apps that take over the controller, such as Steam or a game, then press a button again.
To pair it with a PC by cable, Bluetooth or the adapter, see how to connect a controller to a PC.
A stick moves by itself (stick drift)
The test says “likely stick drift” when a stick rests outside the deadzone.
- Put the controller on a table and press Check for drift to measure again.
- Move the stick round in big circles 20 times, then check again.
- Update the controller in the Xbox Accessories app, on an Xbox or a Windows computer. On a computer, connect it by USB cable or the Xbox Wireless Adapter for this.
- Recalibrate it in the same app: choose your controller, then recalibrate its thumbsticks. This works for Xbox Wireless and Elite Series 2 controllers.
- Blow compressed air round the base of the stick. Don’t put liquid into the controller.
- In your game, raise the stick deadzone a little.
- If it still drifts, use the warranty or a repair service.
To claim the warranty, register the controller at account.microsoft.com/devices with its serial number. It is on the label inside the battery cover, or on the back of an Elite Series 2. Then ask for a repair or a replacement. Check how long your warranty lasts: for some controllers it is less than a year. In the UK and the EU, you may also have rights against the shop that sold it. The controller drift warranty check makes a dated report to send with your claim. Don’t open the controller before you claim: damage from opening it is often not covered.
For a closer look at a drifting stick, use the stick drift test. It measures for 5 seconds and checks how far each stick reaches.
The triggers don’t buzz on their own
The Trigger motors only button shows only where your browser can start them: Chrome or Edge on Windows or a Mac. On Linux and Chromebooks, they work only over Bluetooth. Firefox and Safari can’t, and neither can phones. The Xbox 360 controller has no motors in its triggers. If you see the button but feel nothing, check that vibration is turned on in the Xbox Accessories app, and charge the controller.
A trigger stops short
Press LT or RT all the way down. If Highest stays under 90%, the trigger may be dirty or worn. An Elite controller has trigger locks on the back: slide them to the full position. The Xbox Accessories app can also recalibrate the triggers.
The Xbox button or Share doesn’t light up
Windows, Steam, phones and tablets often keep the Xbox button for themselves: pressing it opens a menu instead. Some browsers don’t pass Share on. That doesn’t mean they’re broken. The test doesn’t need them for your result.
It doesn’t vibrate
Vibration works in Chrome and Edge on a computer, and in Safari on a Mac. It doesn’t work in Firefox, or on iPhone and iPad. Check that vibration is turned on in the Xbox Accessories app.
It lags or disconnects over Bluetooth
Move closer to your device, charge or change the batteries, or use a cable. Other Bluetooth devices and Wi-Fi nearby can get in the way. The Xbox Wireless Adapter is often steadier than Bluetooth on Windows.
How this test works
Your browser reads the controller about as often as your screen updates, and only while this page is open in front. It sees an Xbox controller as a standard controller: the buttons, the d-pad, both sticks and both triggers. The test names them the Xbox way. It finds the model from the code Microsoft gives each controller. Windows often hides that code, so on Windows the test may only say it is an Xbox controller. Your presses stay in your browser: the test doesn’t upload them.
To read where a stick rests, the test waits until the stick stays still for 1 second near the middle. Check for drift measures for 2 seconds while you don’t touch the controller. Up to 5% off centre is normal. Further out but inside the deadzone, games ignore it. Outside the deadzone, it is likely stick drift.
See how we test controllers for where our limits come from. For any other controller, use the controller tester.
What the test can see
- Every button, the d-pad, both sticks and how far each trigger goes down.
- Vibration, in Chrome, Edge and Safari on a computer.
- The motors in the triggers, in Chrome and Edge on Windows or a Mac.
What it can’t see
- The battery level and the headset socket.
- The paddles on an Elite controller on their own: they show as the buttons they copy.
- How fast your controller reports, or input lag.
- Buttons an app such as Steam has changed before the browser gets them.
Questions and answers
Do I need to install an app to test my Xbox controller?
No. This test runs in your web browser on a computer, phone or tablet. Microsoft's free Xbox Accessories app, on Windows or an Xbox, is still worth having. It updates the controller and can recalibrate its sticks.
Which Xbox controllers work?
All of them that your device can connect to. Controllers with Bluetooth (the Xbox Series X|S controller, the Elite Series 2 and the later Xbox One controller) work on computers, phones and tablets. Older Xbox One and Elite controllers need a cable or the Xbox Wireless Adapter. A wireless Xbox 360 controller needs its own Xbox 360 wireless receiver. These work on computers only.
What are impulse triggers?
Small motors inside the triggers of Xbox One, Elite and Series X|S controllers, so a trigger can buzz on its own. Chrome and Edge on Windows or a Mac can start them, so the test can check them. Firefox and Safari can't, and the Xbox 360 controller doesn't have them.
Does it work with an Elite controller?
Yes. The test shows all its normal buttons, sticks and triggers. The paddles on the back copy other buttons, so the button you set them to lights up. If a trigger stops short, check the trigger locks on the back.
How do I find out which Xbox controller I have?
Connect it and press a button. The test names the model when your browser says it. If it doesn't, look at the label inside the battery cover for the model number, such as 1914, and find it in the table under How to read your results. A Share button in the middle means a Series X|S controller.
How exact is the stick drift reading?
It shows what your controller sends to the browser, to the nearest 1%. A new Xbox controller often rests up to about 5% off centre, which is normal. For the most careful reading, use the stick drift test, which measures for 5 seconds and traces each stick's edge.
Can I test the battery or the headset socket?
No. A browser can't read the battery level or the audio socket. On Windows, the Xbox Game Bar shows the battery of a connected controller.