Touch screen test
Check every part of your touch screen, count fingers and watch for ghost touches.
Start with Paint the screen. Each check fills the whole screen, and Exit brings you back here.
Find spots that don't respond to your finger.
Not run yet
See how many fingers the screen feels at once.
Not run yet
Find touches the screen makes by itself.
Not run yet
Quick start
- Press Paint the screen and slide a finger over every square.
- Press Done, then trace any marked squares once more.
- Try Count fingers and Watch for ghost touches too.
- Press Show my result to see what works and what to do.
How to read your results
Paint the screen fills your screen with squares about the size of a fingertip. Each square changes colour when it feels your finger.
When you press Done with squares left, only those squares stay open, with stripes. Trace them once more. A square counts as “didn’t respond” only if it misses your finger both times. One miss is often just a fast finger.
| What you see | What it means |
|---|---|
| Every square responded | Every part of the screen felt your finger, maybe on the second try. The touch screen works. |
| Some squares didn’t respond | Squares away from the edge missed your finger twice. The map and the words show where. That part of the screen may be faulty. |
| Only the edge didn’t respond | Every square inside worked. Only squares along the edge or in a corner missed twice. A case, a thick protector or the phone’s own edge swipes often cause this. |
| Not finished | You left before the end, so the test can’t tell a miss from a fault. Paint the screen again, and press Done when you’re through. |
Count fingers shows a numbered circle under each finger.
| What you see | What it means |
|---|---|
| Most at once | The most fingers the screen felt at the same time. It stays after you lift your fingers. 2 or more means multi-touch works. |
| Your browser says up to 5 | The number your browser reports. It’s often not the screen’s real limit, so the test doesn’t judge it. |
Watch for ghost touches waits 3 seconds while you put the device down. Then it watches for 20 seconds. Every touch in that time is one nobody made. Only touches count: a mouse or a pen doesn’t.
| What you see | What it means |
|---|---|
| No ghost touches | Nothing touched the screen in 20 seconds. |
| One touch nobody made | One touch came by itself. Watch again to be sure. |
| Touches nobody made | Two or more touches came by themselves. That’s ghost touch. See below. |
| Watch stopped | You pressed Exit or left the page before the end. Touches before that may have been your own, so watch again. |
Each touch shows as a dot where it happened, with its kind:
| Kind | What it means |
|---|---|
| Tap | A short touch, under a second, that didn’t move. |
| Stayed down | A touch that stayed for a second or more. |
| Moved | A touch that slid across the screen. |
Touches all in one area point to that spot: a crack, pressure, or water under a protector. Touches all over the screen often come from a charger.
Tip: Slide one finger slowly, in rows from top to bottom. Press Done when the squares look all painted.
If something’s wrong
These are the most common fixes, easiest first.
One area doesn’t respond
- Take off the case and the screen protector. Then paint the screen again.
- Clean the screen with a soft, dry cloth. Dry your hands too.
- Restart the device and test again.
If the same squares still don’t respond, the touch layer is likely damaged there. See “When it’s time for a repair” below.
If you keep a protector on a Samsung Galaxy, turn on Touch sensitivity in Settings, then Display.
Only the edges don’t respond
Your phone uses swipes from the edges for going back, the notifications and the home screen. It can take those touches before the page sees them. A case with a raised rim, or a thick protector, can also block the edges.
Take the case off and paint the screen once more. On an iPhone, Safari’s bars keep the top and bottom of the glass out of the test. In Safari, tap the page menu next to the address, then Hide Toolbar, if you have it.
Nothing works, or the whole screen is wrong
If no touch works, you can’t use this page by touch.
- Unplug the charger and anything else plugged in.
- Restart the device. On an iPhone, press and let go of volume up, then volume down. Then hold the side button until the Apple logo shows. On most Android phones, hold the power and volume down buttons until the phone restarts.
- Use a mouse or keyboard meanwhile. A USB or Bluetooth mouse works on Android phones, iPads and laptops.
- On a Windows laptop, open Device Manager, then Human Interface Devices. If HID-compliant touch screen is turned off, turn it on.
More steps for a phone that ignores every touch are in touch screen not working.
The screen touches by itself
Try these in order. After each one, press Watch for ghost touches again.
- Unplug the charger. If the touches stop, try another charger, cable and power socket.
- Clean and dry the screen. Water or dirt on the glass can act like a finger. See how to clean a screen safely.
- Take off the case and the screen protector.
- Restart the device.
- Install any system update.
Still touching by itself? See the screen touches by itself for more fixes.
On a Lenovo laptop, you can turn off the touchscreen until it’s fixed.
It only happens while charging
A cheap or damaged charger can disturb the touch screen. Use the charger that came with your device, or one from a known brand, and another power socket. Watch for ghost touches once plugged in and once unplugged, and compare.
Touch feels slow or laggy
This test checks where the screen feels you, not how fast. Restart the device and turn off power saving, then try again. To see how often your touch screen reports a touch, drag a finger in the mouse rate test with no mouse connected.
Your phone’s own test
Many devices have a touch test built in. Use it to check our result.
| Device | Where to find it |
|---|---|
| Samsung Galaxy | Open the Phone app and dial *#0*#, then tap Touch. This works on many Galaxy models, not all. Or open Samsung Members, tap Support, then choose Touch screen. |
| Nintendo Switch | System Settings, then Controllers and Sensors, then Test Input Devices, then Test Touch Screen. |
| Dell laptop | The touch screen test in SupportAssist. |
| iPhone and iPad | There is no built-in test. Follow the steps above: Apple suggests the same ones. |
When it’s time for a repair
Maybe the same squares still fail after these steps. Or ghost touches go on with no charger, case or protector. Then the touch layer is likely damaged, often after a drop or water.
On most phones, the glass, the touch layer and the screen are replaced together. Check the warranty first, and see what to do with a cracked phone screen. Download your result and show it to the shop or the maker.
Lines or dots you can see, but not feel, are a display fault. Try the dead pixel test.
How this test works
Your browser tells the page where each finger touches, moves and lifts, using Pointer Events. The test paints every square your finger crosses, even between two reports, so a fast swipe leaves no false gaps.
The squares are about 48 pixels wide, and fill the screen exactly. If you turn the device, the grid starts again. The outer ring of squares and the corners are reported apart, because rounded corners, cases and the phone’s own edge swipes keep some edge touches from the page.
Watch for ghost touches starts a 3 second countdown when you lift your fingers. A touch during the countdown starts it again. Then every touch that begins in the next 20 seconds counts.
On computers without a touch screen, the test says so. You can paint with a mouse, but that doesn’t test touch. If you used a mouse, the result says so.
See how we test phones and computers for where our limits come from, and what a browser can’t measure.
What the test can see
- Every touch your browser reports, with where and when it happened.
- How many fingers are down at once, up to what your screen can feel.
- Touches nobody made, while the device lies still.
What it can’t see
- How hard you press, on most phones.
- Your screen’s real finger limit. Browsers report 5 on iPhones, iPads and many Android phones, whatever the hardware does.
- Touches your phone keeps for itself, such as edge swipes and pulling down the notifications.
- A laptop touchpad, which reaches the browser as a mouse.
Questions and answers
How many fingers should my touch screen feel?
Most phones and tablets feel 5 to 10 fingers at once. Touch screens made for Windows must feel at least 5. You need 2 for zooming with two fingers.
Use Count fingers and put down one finger at a time. The number under Most at once is what your screen really felt.
Why does my browser say 5?
Browsers report 5 on iPhones, iPads and many Android phones, whatever the screen can really do. Some report 1, or 0 on a computer. That's why the test never judges this number. It counts the fingers it actually sees.
What is ghost touch?
Ghost touch is when the screen reacts although nobody touched it. Apps open, letters get typed or the page scrolls by itself.
It often comes from a charger, water or dirt on the glass, or a screen protector. It can also mean the touch layer is damaged.
My iPad touches by itself. What can I do?
Apple's steps for an iPad screen that is too sensitive or reacts by itself: restart the iPad. Clean the screen, and dry it. Unplug any Lightning or USB-C accessory. If the screen then works, try another socket, cable or charger. Take off the case and the screen protector.
Press Watch for ghost touches after each step. If the touches don't stop, the iPad may need a repair. Contact Apple.
Can I test an iPad or a touch screen laptop?
Yes. On an iPad, the test fills the whole screen. A swipe down from the top can end full screen, so start again if that happens.
On a Windows laptop or a Chromebook with a touch screen, use your fingers, not the touchpad. A touchpad can't be tested here: the browser sees it as a mouse.
Does this test work on an iPhone?
Yes. On an iPhone, Safari can't make a page full screen, so the test fills the browser window. Its bars keep a strip at the top and bottom out of the test. The result says so.
Does a screen protector change the result?
It can. A thick, loose or cheap protector can make spots or edges miss your finger. Water trapped under a protector can cause ghost touches. Take it off and test again to be sure.
Can this test measure touch delay?
No. A web page can't see when the picture changes on the glass, so it can't measure the delay. The mouse rate test shows how often your touch screen reports a touch, when no mouse is connected.
Does this site record my touches?
No. The test only uses your touches on this page. Nothing is saved or sent.