PS5 controller test
Check every button, trigger and stick on your PS5 controller.
Connect your PS5 controller, then press any button on it
Your browser shows a controller to a page only after you press a button on it.
- USB: plug in a USB-C cable that carries data, not one that only charges.
- Bluetooth: with the light off, hold PS and Create until the light flashes. Then choose DualSense Wireless Controller in your device’s Bluetooth settings.
Works in Chrome, Edge, Firefox and Safari. A PS4 controller (DualShock 4) works too.
On iPhone and iPad, PS5 and PS4 controllers work in Safari. On Android, they work in Chrome.
Advanced DualSense test
Chrome and Edge on a computer can connect to a DualSense directly. Then you can test the parts the test above can’t see.
What it adds
- Where you touch the touchpad, with two fingers
- The motion sensors, when you tilt and turn it
- The adaptive triggers, with three effects to feel
- The light bar colour and the player lights
- The battery level and charging
- The mute button and its light
- Each vibration motor on its own
- Exact stick values, with a drift reading
It needs Chrome or Edge (or another browser built on Chrome) on a Windows, Mac, Linux or ChromeOS computer, and a DualSense or DualSense Edge.
Quick start
- Connect your PS5 controller by USB-C cable or Bluetooth.
- Press any button on it, such as Cross.
- Press every button and move both sticks all the way round.
- When every button and stick has worked, the test says so. Press Show my result to see your result.
How to read your results
| What you see | What it means |
|---|---|
| A plain button | Not pressed yet. |
| A filled-in button | Held down right now. |
| A lightly coloured button | It worked. Your browser got the press. The list under the picture shows a tick next to it. |
| A dot in the middle | The stick rests in the centre. That is normal. |
| A dot outside the small ring | The stick rests outside the deadzone. Games may move by themselves: stick drift. |
The picture is a PS5 controller. The big shape in the middle is the touchpad: it lights up when you press it down.
Button names. The test uses the names printed on a PlayStation controller:
| Where it is | Its name |
|---|---|
| The four buttons on the right | Cross (bottom), Circle (right), Square (left), Triangle (top) |
| The shoulder buttons | L1 and R1 |
| The triggers | L2 and R2, from 0% to 100% |
| Pressing a stick down | L3 and R3 |
| Beside the touchpad | Create (left) and Options (right) |
| Below the touchpad | PS button, and the touchpad press |
Your controller. Once your controller is connected, a box beside the picture names its model when your browser says it: DualSense, DualSense Edge or DualShock 4. It lists what this test checks on it and what a browser can’t read.
| Part of a PS5 controller | The main test | The advanced test (Chrome or Edge on a computer) |
|---|---|---|
| Buttons, d-pad and sticks | Yes | Sticks in exact steps, with a drift reading |
| How far L2 and R2 go down | Yes, from 0% to 100% | Yes, from 0 to 255 |
| Pressing the touchpad | Yes, in Chrome and Edge, as a button | Yes |
| Where you touch the touchpad | No | Yes, up to two fingers |
| Motion sensors | No | Yes |
| Adaptive triggers (how hard they push back) | No | Yes: three effects to feel |
| Vibration | Simple rumble only, in Chrome, Edge and Safari on a computer | Each motor on its own |
| Light bar and player lights | No | Yes: choose a colour and a pattern |
| Battery | No | Yes, in steps of 10% |
| Mute button | No | Yes, and its light |
| DualSense Edge back and Fn buttons | They light up the button you set them to | Yes, each on its own |
| Speaker and microphone | No | No. With a USB cable, choose the controller as your computer’s speaker and microphone in its sound settings. Then use the sound test and the microphone test. |
The advanced DualSense test. It sits under the main test. Press Connect DualSense. Your browser shows a list of devices: choose DualSense Wireless Controller (or DualSense Edge Wireless Controller), then press Connect. Next time, your browser remembers it and doesn’t ask again.
| Part | What you see | What is normal |
|---|---|---|
| Touchpad | A grid of 32 squares. Each square you touch turns orange. A numbered dot shows each finger. | Every square turns orange after a few slides. A square that never does may be a dead spot. |
| Sticks | Each stick’s position in steps from 0 to 255, with 128 in the middle, and the furthest it reached. | Each stick reaches near 0 and 255 both ways. At rest it stays within 5% of the middle. |
| Adaptive triggers | Off, Resistance, Click and Buzz. L2 and R2 from 0 to 255. | You feel each effect in both triggers. A full press reaches 255. |
| Motion sensors | Turning speed in degrees per second, and tilt in g (1 g is gravity). | On a table, turning speed stays near 0 and one tilt bar shows about 1 g. |
| Battery | About how full it is, and whether it is charging. | It goes up while charging. |
| Mute button | A tick once it worked. Its orange light turns on and off with each press. | The light follows your presses. |
Your result. When every button and both sticks have worked, the bar above the picture says so and shows the Show my result button. Press it and the result takes the place of the test. To test more, press Continue test: everything you tested is kept.
Tip: Not pressed yet doesn’t mean broken. It means the test hasn’t seen that button. Press it to check.
If something’s wrong
These are the most common problems with PS5 controllers, most likely first.
It won’t pair by Bluetooth
- Turn off your PS5, or unplug it. Otherwise the controller may connect to the console instead.
- Unplug the controller’s cable. If its light is on, hold PS for about 10 seconds until the light goes off.
- Hold Create and PS together until the light around the touchpad flashes.
- On your device, open the Bluetooth settings and choose DualSense Wireless Controller.
On iPhone and iPad, open Settings, then Bluetooth. For a PS4 controller, hold Share and PS instead, and choose Wireless Controller.
Nothing happens on a computer
- Press a button on the controller. Browsers only show a controller after a button press.
- Try another USB-C cable. Many cables only charge and can’t carry data.
- Close apps that take over the controller, such as Steam, DS4Windows or DSX, then press a button again.
To pair it with a PC by cable or Bluetooth, see how to connect a controller to a PC.
It shows up as an Xbox controller
Steam Input, DS4Windows and similar apps turn a PlayStation controller into an Xbox one for games. Then the test sees an Xbox controller, with Xbox names. Close the app, or in Steam open Settings, then Controller, and turn off Steam Input for PlayStation controllers. Then turn the controller off and on, and press a button again. To keep the app running, press Change under the test and choose PlayStation.
A stick moves by itself (stick drift)
The test says “likely stick drift” when a stick rests outside the deadzone.
- Put the controller on a table and press Check for drift to measure again.
- Move the stick round in big circles 20 times, then check again.
- Update the controller: on the PS5, or in the PlayStation Accessories app on a Windows computer.
- Reset it: with the controller off, press the small button in the hole on the back for 5 seconds.
- Blow compressed air round the base of the stick. Don’t put liquid into the controller.
- In your game, raise the stick deadzone a little. The PS5 has no stick calibration. A DualSense Edge has stick deadzone settings in its profiles.
- A DualSense Edge can get a new stick module. For a normal DualSense, use the warranty or a repair service.
Sony gives a one-year warranty on a DualSense: check the card that came with yours. In the UK and the EU, you may also have rights against the shop that sold it. The controller drift warranty check makes a dated report to send with your claim. Don’t open the controller before you claim: damage from opening it is often not covered. Sony’s DualSense troubleshooting page leads to its repair service.
For a closer look at a drifting stick, use the stick drift test. It measures for 5 seconds and checks how far each stick reaches.
The touchpad press doesn’t light up
Press the touchpad down until it clicks. Chrome and Edge show the press. Some other browsers don’t pass it on, and some computers keep it for themselves. The test doesn’t need it for your result.
The PS button doesn’t light up
Your system may keep it: on a Mac, in Steam and on some computers it opens a menu instead. That doesn’t mean it’s broken. The test doesn’t need it for your result.
A trigger stops short
Press L2 or R2 all the way down. If Highest stays under 90%, the trigger may be dirty or worn. A DualSense Edge has trigger stop switches on the back: slide them to the full position.
It doesn’t vibrate
Vibration works in Chrome and Edge on a computer, and in Safari on a Mac. It doesn’t work in Firefox, or on iPhone and iPad. On Windows, a PS5 controller often vibrates only with a USB cable. The test can play simple rumble only, not the fine haptic feedback games use.
The advanced test’s list is empty, or it won’t connect
- Connect the controller first: plug in a USB-C cable that carries data, or pair it by Bluetooth. Then press Connect DualSense again.
- Close Steam, DS4Windows and DSX. They can take over the controller, and Steam changes the lights itself.
- Use Chrome or Edge on a computer. Phones, tablets, Safari and Firefox can’t connect to a controller this way.
- On Linux, Chrome needs permission to read the controller. Install your system’s Steam device rules (often a package called steam-devices), then unplug and plug in the controller.
The triggers don’t push back
- Pick Resistance, then press L2 slowly. Effects only play while this page is open.
- Close Steam and DSX: they can switch the effects off.
- On a DualSense Edge, slide the trigger stop switches on the back to the longest position. Shorter stops weaken or turn off the effects.
- Update the controller on a PS5, or with the PlayStation Accessories app on a Windows computer.
If you feel nothing on either trigger after an update, the trigger motors may be faulty. Contact Sony support.
It lags or disconnects over Bluetooth
Move closer to your device, charge the controller, or use a USB-C cable. Other Bluetooth devices and Wi-Fi nearby can get in the way.
How this test works
Your browser reads the controller about as often as your screen updates, and only while this page is open in front. It sees a PS5 controller as a standard controller: the buttons, the d-pad, both sticks, both triggers and the touchpad press. The test names them the PlayStation way. It finds the model from the code Sony gives each controller, which most browsers pass on. Your presses stay in your browser: the test doesn’t upload them.
To read where a stick rests, the test waits until the stick stays still for 1 second near the middle. Check for drift measures for 2 seconds while you don’t touch the controller. Up to 5% off centre is normal. Further out but inside the deadzone, games ignore it. Outside the deadzone, it is likely stick drift.
See how we test controllers for where our limits come from. For any other controller, use the controller tester.
How the advanced test works. Chrome and Edge on a computer can open a controller directly, after you choose it in the browser’s list. The advanced test then reads the controller’s own reports, about 250 times a second by USB. They hold the touchpad, the motion sensors, the battery and the mute button. It sends back the trigger effects, vibration and lights. It also reads the controller’s own sensor settings, so motion shows in degrees per second and g. It turns the effects and vibration off when you press Disconnect, switch tabs or leave the page, and puts the mute back as it was. A light colour you chose usually stays until the controller turns off. The number of updates a second is how many reached your browser, not the input lag. It reads the controller the same way the PlayStation driver in Linux does.
What the test can see
-
Every button, the d-pad, both sticks and how far each trigger goes down.
-
The touchpad press, in Chrome and Edge.
-
Simple vibration, in Chrome, Edge and Safari on a computer.
-
With the advanced test in Chrome or Edge on a computer: where you touch the touchpad, motion, the battery, the mute button, the Edge’s back and Fn buttons, three trigger effects, each motor and the lights.
What it can’t see
- The speaker, the microphone and the fine haptic feedback games use.
- Where you touch the touchpad, motion, the triggers, lights and battery, on phones, tablets, Safari and Firefox.
- The DualShock 4 in the advanced test: it uses other reports.
- Input lag. The main test also can’t see how often your controller reports.
- Buttons an app such as Steam has changed before the browser gets them.
Questions and answers
Do I need a PS5 to test my PS5 controller?
No. Connect the controller to a computer, phone or tablet and open this page. The test reads the controller itself, so the console can stay off. That also helps you tell a broken controller from a problem with the console.
How do I test the touchpad, motion sensors and adaptive triggers?
Use the advanced DualSense test, under the main test. It works in Chrome or Edge on a Windows, Mac, Linux or ChromeOS computer. Press Connect DualSense, then choose your controller in the list your browser shows. It shows where you touch the touchpad, the motion sensors, the battery and the mute button. It also lets you feel three trigger effects, each vibration motor and the lights.
Phones, tablets, Safari and Firefox can't connect to a controller this way. There, the main test still checks every button, stick and trigger. To check the other parts, use the PS5: play a game that uses them, such as Astro's Playroom, which comes with the console.
Does it work with a DualSense Edge?
Yes. The test shows all its normal buttons, sticks and triggers. The back buttons copy other buttons, so the button you set them to lights up. If a stick drifts, you can swap the stick module for a new one instead of buying a new controller.
Does it work with a PS4 controller?
Yes. A DualShock 4 shows the same buttons, with Share instead of Create. Pair it by holding PS and Share until the light bar flashes.
Why does my PS5 controller show up as an Xbox controller?
Steam, DS4Windows or a similar app is passing it on to the computer as an Xbox controller. The test then sees an Xbox controller. Close the app, or turn off Steam Input for this controller, then press a button again.
How do I check my PS5 controller's battery?
In Chrome or Edge on a computer, connect it in the advanced DualSense test. It shows the battery level and whether it is charging. The controller gives the level in steps of 10%, so it shows "about 65%". On the PS5, press the PS button. The battery level shows with the controller at the bottom of the screen. To read the light bar while it charges, see how to tell if a PS5 controller is charging.
Why is my PS5 controller mic not working?
Check the mute button under the PS button first. When it lights orange, your microphone is muted. Press it to turn the microphone on again.
On the PS5, go to Settings, Sound, Microphone. Choose the controller as the Input Device, and use Adjust Microphone Level.
On a Windows PC, Sony says the built-in microphone works only in games that support it. It doesn't work on a Mac or a phone. To check whether your PC hears it, use our microphone test.
How exact is the stick drift reading?
It shows what your controller sends to the browser, to the nearest 1%. A new DualSense often rests 1–3% off centre, which is normal. For the most careful reading, use the stick drift test, which measures for 5 seconds and traces each stick's edge.