Double-click test

Find a mouse button that clicks twice when you click once.

Click in the box below, one click at a time.

Partly available on this device

This test needs a mouse or a touchpad. Connect a mouse by USB or Bluetooth, then click in the box.

Click hereOne click at a time, at your normal pace

Clicks
0
Clicked twice by itself
0
No button so far
Last gap
None yet
Time between two clicks of one button
Time between clicks

Clicked twice by itselfunder 80 ms

Double-clickusually under 500 ms

Single clicks500 ms or more

Click twice to see the time between your clicks here.

Your last clicks

Click in the box to see your clicks here.

Quick start

  1. Click in the box with the button that double-clicks, one click at a time.
  2. Click about 20 times. Then hold the button down for 3 seconds.
  3. Press Show my result to see each button and what to do.

How to read your results

The Time between clicks scale shows each click, by how long it came after the click before it on the same button.

What you see What it means
A red diamond on the left The button clicked twice by itself: two clicks less than 80 milliseconds apart, or a click right after you let go. A red diamond also shows when a held button let go by itself for a moment.
A ring in the middle A double-click: two quick clicks you made on purpose.
A line on the right A single click.

The Buttons you clicked table lists each button. Buttons that clicked twice by themselves come first.

Status What it means
Clicks twice by itself Two problems or more: extra clicks, or letting go while held. The switch in this button is likely worn or dirty.
Once: click it more One problem. Click it about 20 more times to be sure.
No extra clicks 20 clicks or more, and it never clicked twice by itself.
Click it more Too few clicks to say yet.

Tip: Click at your normal pace, about once a second. Very fast clicking, with two fingers or by vibrating your hand, can look like an extra click.

If something’s wrong

These are the most common fixes, easiest first.

A button clicks twice by itself, or lets go while you drag

  1. Unplug the mouse, or take out its battery.
  2. Blow compressed air into the gap around the button from a few sides.
  3. Click the button about 50 times, then test again.

It clicks twice on another computer too

Then the problem is most likely in the mouse, not your computer. If the mouse is under warranty, contact the seller or the maker before you open it or change its settings. Download your result from this test and add it to your claim, with the mouse model and how it was connected.

Some makers fix clicking twice with a firmware update in their app, so check for one too.

Not sure yet? The swap test checks the mouse, the computer and the app one at a time.

Your mouse has an app from its maker

Some gaming mice have a debounce or click-response setting in their app. It tells the mouse to ignore a second contact that comes too soon. Raise it one or two steps above where it is, and test again. Each step makes clicks react a little later. If it only helps at a much higher setting than it came with, the switch is worn.

Glorious, Pulsar, Endgame Gear, Lamzu and some Corsair mice have a setting like this. Razer mice, and most Logitech and SteelSeries mice, don’t. Your mouse’s instructions say what yours has.

Your double-clicks don’t open files

That’s a setting, not a fault: your computer wants the two clicks closer together. Keep the mouse still while you double-click, or make the double-click speed slower.

Windows

  • Windows 11: open Settings, then Bluetooth and devices, then Mouse, then Additional mouse settings.
  • Windows 10: open Settings, then Devices, then Mouse, then Additional mouse options.
  • On the Buttons tab, move the Double-click speed slider towards Slow. Double-click the folder next to it to try it.

Mac

  • Open System Settings (System Preferences on older Macs), then Accessibility, then Pointer Control. Move the Double-click speed slider towards Slow.

For a bigger pointer, a slower speed or dragging without holding the button, see make your mouse easier to use.

It only happens on Bluetooth

Bluetooth sends clicks in small batches, which can make two clicks look closer than they were. Test with the cable or the USB receiver if your mouse has one. If the extra clicks stop, the switch is probably not the cause.

Cleaning didn’t help

The switch is most likely worn. A repair shop can replace it; it needs soldering on most mice. Opening the mouse can end the warranty, so check that first. Otherwise, it’s time for a new mouse. Mice with optical switches rarely have this fault.

Apps that filter out fast clicks only hide the fault, and they slow your real double-clicks too.

How this test works

Your browser tells the page when each mouse button goes down and up, with the time. When two clicks of one button come less than 80 milliseconds apart, the test counts an extra click. It also counts a click that comes less than 20 milliseconds after you let go. The mouse test uses the same limits. A finger can hardly click that fast. A worn switch does it in a few milliseconds.

When you hold a button for a second or more, and it lets go and comes back within 50 milliseconds, the test counts that as letting go by itself. That’s what makes a dragged file drop.

Your browser also tells the page whether two clicks counted as a double-click, using your computer’s double-click speed. A web page can’t read that setting itself.

See how we test mice and touchpads for where our limits come from, and what a browser can’t measure.

What the test can see

  • Every mouse button your browser reports, including the side buttons in most browsers.
  • The time between clicks, usually to about a millisecond. Some privacy settings make it coarser.
  • Whether your computer counted two clicks as a double-click.

What it can’t see

  • Very short bounces that your mouse hides before they reach the computer.
  • Whether you clicked twice on purpose very fast.
  • Whether a touchpad click was a press or a tap.
  • The side buttons in Safari.

Questions and answers

Why does my mouse double-click when I click once?

Inside each mouse button is a small metal switch. When it wears out or gets dirty, it can make contact twice for one press. Your computer then gets two clicks. This is called switch chatter.

It's the most common mouse fault. It often starts after a year or two of heavy use.

How fast must two clicks be to count as "by itself"?

We count an extra click when two clicks of one button come less than 80 milliseconds apart, or when a click comes less than 20 milliseconds after you let go. A finger can hardly click that fast. Most people's double-clicks take about 100 to 300 milliseconds.

Does my own double-click count as a fault?

No. A normal double-click is slower than 80 milliseconds, so it doesn't count. The test even shows whether your computer counted it as a double-click. Only very fast clicking on purpose can look like an extra click.

One extra click showed up once. Is my mouse broken?

Not necessarily. Click the same button about 20 more times, one click at a time. A worn switch usually does it again. If it happens only once in many clicks, keep an eye on it.

What is the double-click speed?

It's how close two clicks must be for your computer to open a file. Windows uses half a second unless you change it. If your double-clicks often don't open things, make it slower.

On Windows 11, open Settings, then Bluetooth and devices, then Mouse, then Additional mouse settings. On Windows 10, open Settings, then Devices, then Mouse, then Additional mouse options. On a Mac, open System Settings (System Preferences on older Macs), then Accessibility, then Pointer Control.

Files open with one click. Is my mouse broken?

Maybe not. Windows can be set to open items with one click. Open File Explorer options and choose "Double-click to open an item". If it's set right and this test shows extra clicks, the button is at fault.

Can I test a touchpad?

Yes, but press it down to click: don't tap. A tap counts as a click here too, and taps have no switch that can wear out. Turn off tap to click in your touchpad settings while you test, if you can.

Some touchpads, like the one on newer MacBooks, have no switch at all. If yours clicks twice, check its settings first. Taps on a phone or tablet screen don't count.

Does this site record my clicks?

No. The test only times your clicks on this page. Nothing is saved or sent.

Guides for this test