Pen pressure test
Check that your pen or stylus sends pressure, tilt and hover.
Draw in the box with your pen. Press lightly, then hard.
Draw here with your penPress lightly, then hard. Tilt the pen as you draw.
This test needs an active pen: a drawing tablet's pen, an Apple Pencil, an S Pen or a Surface Pen. Fingers and rubber-tipped styluses have no pressure.
Draw with your pen to see your pressure here.
- Pressure
- –
- Touch the pad with the pen
- Tilt
- –
- Lean the pen as you draw
- Pressure levels
- –
- Different values received
What your pen sent
- PenNot yet
- PressureNot yet
- TiltLean the pen as you draw
- TwistTurn the pen in your fingers
- HoverHold the pen just above the surface
- Side buttonPress it, if your pen has one
- Eraser endDraw with it, if your pen has one
- Straight lineNot checked yet
Quick start
- Draw in the box with your pen, pressing lightly, then hard.
- Lean the pen as you draw, then hold it just above the surface.
- Press Show my result to see what your pen sent.
How to read your results
What your pen sent lists everything a pen can send, with what we saw.
| Row | What it means |
|---|---|
| Pen | Whether the browser saw a pen. “Only a mouse so far” means it got mouse input, with no pressure. |
| Pressure | Works with many levels from light to firm. Stuck at 50% means no pressure reached the browser. Only a few levels means pressure jumps in steps. |
| Tilt | How far the pen leans. “Not reported” is normal for pens without a tilt sensor. |
| Twist | Turning the pen in your fingers. Only a few pens have it, such as the Wacom Art Pen. |
| Hover | The pen is seen just above the surface, before it touches. A ring follows it on the pad. |
| Side button, Eraser end | Shown once you press the side button or draw with the eraser end. A side button set to scroll or pan in the pen’s settings never reaches the browser. |
| Straight line | How far a slow line along a ruler strayed from straight. |
The figures beside the pad show Pressure now, Tilt now and how many Pressure levels arrived. The line under the pad shows your pressure over the last 6 seconds. With working pressure, it rises and falls as you press. Without pressure, it stays flat at 50%.
Tip: Your lines get thicker as you press harder. If every line is the same thickness, no pressure is coming through.
The straight-line check
Press Check a straight line, then draw slowly along a ruler, taking 3 to 5 seconds. On a pen display or an iPad, lay the ruler on the dotted line. On a tablet without a screen, lay it on the tablet. We fit a straight line to yours and measure how far it strays, in screen pixels.
| Result | What it means |
|---|---|
| Straight (1.5 px or less) | Normal. Your tablet tracks smoothly. |
| Slight wobble (up to 3 px) | Often fine. Try again to be sure. |
| Wavy (more than 3 px) | The line waved more than a ruler line usually does. Try again. If it stays wavy, the tablet is a likely cause: see the fix below. |
A line that bends a lot, or is drawn too fast, isn’t judged. Your hand, the ruler and your screen’s scaling also affect the number, so compare lines drawn the same way.
If something’s wrong
These are the most common fixes, most likely first.
Pressure stays at 50%, or the test only sees a mouse (Windows)
Windows Ink passes your pen to the browser. When it’s off, the browser gets a mouse.
- Open your pen’s settings app: Wacom Tablet Properties, XP-Pen (PenTablet) or HuionTablet.
- Find Use Windows Ink (Wacom: the Pen tab, then Mapping) and switch it on.
- Reload this page and draw again.
If that doesn’t help, install the latest driver from the maker’s website. Remove drivers for other tablet brands, plug the tablet straight into the computer, and restart.
Pressure doesn’t work on a Mac
- Open System Settings, then Privacy and Security, then Accessibility.
- Switch on your tablet’s driver (for example Wacom Tablet Driver or HuionTablet).
- Do the same under Input Monitoring, then restart the Mac.
Pressure works here but not in my drawing app
| App | What to check |
|---|---|
| Photoshop | With the Brush tool, turn on Always use pressure for size in the bar at the top (the pen button). Or open Brush Settings, then Shape Dynamics, and set Size Jitter, then Control to Pen Pressure. |
| Krita | Open Settings, then Configure Krita, then Tablet settings, and switch between Windows 8+ Pointer Input and WinTab. |
| Clip Studio Paint | Open File, then Preferences, then Tablet, and switch between Use TabletPC and Use Wintab. |
| Procreate | Open Actions, then Prefs, then Pressure and Smoothing, and reset the pressure curve. |
If the app still gets no pressure, the swap test helps you tell if the pen, the computer or the app is at fault.
Apple Pencil on an iPad
- Check your model. The Apple Pencil (USB-C) has no pressure.
- Charge it, and check it’s connected in Settings, then Bluetooth.
- Screw the tip on firmly. A worn tip can feel scratchy and draw unevenly.
S Pen on a Samsung phone or tablet
- Put in a new tip if it’s worn or short.
- Take off any case with a magnet near the screen.
- Check Settings, then Advanced features, then S Pen.
Surface Pen
Charge a Surface Slim Pen, or put a fresh battery in a pen that takes one. Then pair it again in Settings, then Bluetooth and devices. The Surface app sets how hard you need to press.
I can’t reach full pressure
Your firmest press stays well under 100%, even when you press hard. Open your pen’s settings app and choose a softer pressure setting (Wacom calls it Tip Feel). A worn tip can also need more force.
Lines are wavy
- Move the tablet away from chargers, speakers and other screens.
- Use the cable that came with it, plugged straight into the computer.
- Try a little stroke smoothing in your drawing app.
If lines still wave on another computer, contact the maker. Add your result to the claim.
How this test works
Your browser tells the page about every pen movement: where it is, how hard it presses, how it leans and turns, and which buttons are held. These are called pointer events. We read every sample, including the extra ones a fast pen sends between screen updates.
Pressure counts as working when it changes as you press: at least 16 different levels in 2 lines or more, with your firmest press at least 30% above your lightest. One value all the time means no pressure reaches the browser. A device without pressure always reports 50% while it touches. A pen that the browser calls a mouse still counts when its pressure changes, as Firefox does on some systems.
What the test can see
- Pressure, tilt, twist and hover, as your browser receives them.
- The side button and the eraser end.
- How straight a slow line along a ruler comes out.
What it can’t see
- What your drawing app receives. Apps can read the pen another way.
- How many levels your pen has. We count the levels that reached the browser.
- Whether the pen lines up with the screen (calibration), or its battery level.
See how we test mice, touchpads and pens for where our limits come from, and what a browser can’t measure.
Questions and answers
Why does my pen pressure stay at 50%?
50% is what a browser reports when a device has no pressure. A mouse always shows it. If your pen shows it too, the pressure isn't reaching the browser.
On Windows, the usual cause is Windows Ink being off in the pen's settings app. On an iPad, the Apple Pencil (USB-C) has no pressure at all.
My tablet says 8,192 levels. Why do I see fewer?
The number here counts the different values your browser received while you drew, not what the pen can do. Windows often passes about 1,024 steps to the browser, and a few lines only use part of the range. Hundreds of levels means pressure works well.
Does the Apple Pencil (USB-C) have pressure?
No. The Apple Pencil (USB-C) has no pressure sensor, so it draws every line at the same thickness. The first Apple Pencil, the Apple Pencil (2nd generation) and the Apple Pencil Pro all have pressure. To pair one, see how to connect a stylus to an iPad.
My pen shows no tilt. Is it broken?
Probably not. Many pens have no tilt sensor, including some basic Wacom, XP-Pen and Huion pens. Check your pen's specs. Firefox also reports tilt on fewer systems than Chrome, Edge and Safari.
Can I test a rubber-tipped stylus?
You can draw with it, but it has no pressure. The screen feels it like a finger. Pressure needs an active pen, such as an Apple Pencil, an S Pen, a Surface Pen or the pen of a drawing tablet.
Pressure works here but not in Photoshop. Why?
Then the pen and its driver work. Browsers read the pen through Windows Ink, while some apps use another way, called Wintab. Check the app's own pressure setting first. See the Photoshop and Krita rows under If something's wrong.
Which browser is best for this test?
Chrome or Edge on a computer, Safari on an iPad, and Chrome or Samsung Internet on Android. Firefox works too, but on some systems it treats a pen as a mouse or rounds its pressure.
Does this site record my drawing?
No. The test only reads your pen on this page. Nothing is saved or sent.