STL viewer

Open an STL file and check it's ready for your 3D printer.

Your STL files stay on your device. They are opened in your browser and never uploaded.

STL files, binary or text. 3MF, OBJ and PLY files open too.

Made it in a CAD app or slicer? Export it as STL or 3MF first.

Or drop files here.

Quick start

  1. Press Choose an STL file and pick your model.
  2. Read the printing check, the size and the volume.
  3. Pick your printer under Does it fit your printer?

How to read your results

When your model opens, the print check comes first, then the numbers a printer cares about.

What you see What it means
The surface is closed (watertight) Every edge joins two triangles, so a slicer knows what is inside the model and can fill it. This is what you want.
Not closed: holes or gaps The surface has openings, often from a 3D scan or a model made for games. Slicers fix small gaps; big holes print wrong.
Edges shared by more than two triangles Parts touch along a line or meet inside each other. A slicer may not know which side is inside.
Some triangles face the wrong way The file says some outside faces point inwards. Most slicers turn them back by themselves.
Size (width × depth × height) The box the model just fits in, in millimetres. Under it, the same size in inches.
Volume The space inside the model. 1 cm³ is 1 ml. It only shows when the surface is closed.
Triangles How many flat pieces the surface is made of. More triangles mean smoother curves and a bigger file.
Does it fit your printer? Whether it fits inside the build size the maker publishes, as placed or turned a quarter turn. If not, how many millimetres are too big, and the scale that would fit.

Tip: The printer list holds common home printers. If yours isn’t there, choose Another size: type it in and enter the build size from its manual. The page remembers your choice on this device.

Export settings for a clean STL

Most problems start when the file is saved. Use these settings in the app you drew the model in.

App Where Settings
Fusion Right-click the body, Save as Mesh (or File, Export) Format STL (binary), unit millimetre, refinement high.
SolidWorks File, Save As, type STL, then Options Binary, unit millimetres, resolution fine.
Onshape Right-click the part, Export Format STL, binary, units millimetre, resolution fine.
Tinkercad Export, .STL Nothing to set: Tinkercad works in millimetres.
Blender File, Export, STL Blender counts in metres. A model made in metres needs Scale 1000. A model made in millimetres (unit scale 0.001) needs Scale 1 with Scene Unit off. Check one size you know here.
SketchUp File, Export, 3D Model, STL Units millimetres, binary.
Your slicer Right-click the model and export it (PrusaSlicer, OrcaSlicer, Bambu Studio), or File, Export (Cura) Use this to share a model you changed in the slicer.

Resolution decides how smooth curves are. Too coarse and round holes print as flat-sided shapes. Too fine and the file gets very big without a better print. “Fine” or “high” is right for most parts.

If something’s wrong

The model looks tiny or huge

An STL file only holds numbers. It never says if they are millimetres, inches or metres, so the viewer starts with millimetres, like almost every printer.

What you see Likely unit in the file What to do
About 25 times too small Inches Choose inch under The file’s numbers are in. In your slicer, scale it to 2540 %.
About 10 times too small Centimetres Choose cm. In your slicer, scale it to 1000 %.
About 1000 times too small Metres (Blender, some game apps) Choose m. In Blender, export it again with Scale 1000.
Much too big Microns, or a drawing made at a large scale Export it again in millimetres.

Some slicers notice a model that is far too small and offer to convert it for you.

It doesn’t fit on my printer

Turn it a quarter turn or lay it on another side in your slicer: the page already checks the quarter turn. If it is still too big, scale it down to the size the page gives, or split it into parts that you glue together.

It says the surface isn’t closed

The model has holes or gaps. Many slicers repair small gaps by themselves when they load the file. For bigger holes, use the repair tool in your slicer, then check the file again here. If you drew the model yourself, check that all parts are joined into one solid before you export.

Round parts look like they have flat sides

The file was exported with a low resolution. Export it again with a finer setting (see the table above). The viewer shows exactly what is in the file.

The model lies on its side

Your app saved it with Y up instead of Z up. Open More ways to look and change Which way is up in the file. Your slicer has a “lay on face” or rotate tool for the print.

The file won’t open

  1. A STEP, IGES or DWG file is a CAD file, not an STL. Save it as STL or 3MF from your CAD app.
  2. A ZIP download holds the model inside. Unzip it first, then choose the STL.
  3. A file that stops halfway was cut short while downloading. Download it again.

I can’t find my file on an iPhone

Safari saves downloads in the Files app, in Downloads. Press Choose an STL file, then Choose File, and open Downloads. Save files from email or messages to Files first.

How this tool works

The viewer reads the file in your browser, on your device, and draws it with WebGL, the browser’s built-in 3D graphics. Nothing is uploaded.

The printing check joins triangle corners that sit in exactly the same place, then counts how many triangles share each edge. Each edge of a closed surface is shared by exactly two triangles. The volume is worked out from the closed surface, so it only shows when the surface is closed.

The printer check compares the model’s size with the build size the printer maker publishes, as placed and turned a quarter turn on the bed. It doesn’t know about brims, clips or a purge line, so leave a few millimetres spare.

What it can’t do:

  • It doesn’t check wall thickness, overhangs or surfaces that cross each other. Your slicer’s preview shows those.
  • It doesn’t slice, repair, scale or convert the file.
  • On phones, the printing check is skipped above 1.5 million triangles, and on computers above 5 million.

Questions and answers

Are my STL files uploaded?

No. The file is opened in your browser, on your own device, and never sent to us or anyone else.

Should I use STL or 3MF?

Both work in every common slicer. STL is the oldest and most widely shared format, but it only holds triangles: no unit, no colours, no print settings.

3MF also stores the unit, colours and several parts in one file, so nothing gets the wrong size. If your app can save 3MF, it's the safer choice. This page opens both.

What's the difference between binary and text (ASCII) STL?

They hold the same shape. A text STL writes every number out as text, so it is usually several times bigger. Choose binary when you export, unless a program asks for text.

How much filament will my model use?

The volume tells you how much the model alone would use if it were printed solid. 1 cm³ of PLA weighs about 1.24 grams, so a solid 10 cm³ model needs about 12 grams.

Real prints are mostly hollow inside, with a pattern (infill) of 10 to 20 % in most slicer settings, so the model itself uses less. Supports, a brim and purging add some back. Your slicer gives the real total after it slices the model.

Can I fix or edit the model here?

Not yet. This page shows what is wrong, but doesn't change the file. Most slicers repair small holes and flipped triangles by themselves. For bigger repairs, use the repair tool in your slicer or a mesh editor such as Blender.

Can I open an STL file on an iPhone or Android phone?

Yes. Press Choose an STL file and pick it from Files (iPhone) or your downloads (Android). One finger turns the model, two fingers move it, and pinching zooms.

Phones have less memory than computers, so very big files (over 100 MB) may not open. The viewer warns you first.

Is this the same as the 3D viewer?

It uses the same viewer, set up for 3D printing. The 3D viewer opens more kinds of files, such as GLB, glTF and FBX from games and 3D apps, and shows the model first. This page starts with the print check and asks which printer you have.