Water eject

Play a low tone that may help shake water drops out of your phone's speaker.

Pulses of a low tone165 HzPlays for 30 sec

Warning: Disconnect headphones and turn off Bluetooth earbuds first. This sound is for your phone's speaker, not your ears.

Sound

Short pulses of a low 165 Hz tone. Most water eject tools use this pitch.

70%

Turn your device's volume up for the 30 seconds, then back down.

Quick start

  1. Unplug headphones, then turn your phone's volume up.
  2. Hold the phone with the speaker facing down.
  3. Press Start water eject and let it play 30 seconds.
  4. Press Play again once or twice more, then let your phone dry.

How to use the water eject

Your phone’s speaker sits behind a grille with tiny holes. After a splash or a swim, drops can stay stuck in those holes and make the sound muffled or crackly. The water eject plays a low sound that makes the speaker move a lot, which may help push those drops out.

  1. Dry the outside first. Wipe the phone with a soft, dry cloth. If your phone shows a “liquid detected” warning, unplug the charger.
  2. Unplug headphones and turn off Bluetooth earbuds, so the sound plays through the phone’s own speaker.
  3. Turn the volume up with the phone’s side buttons. Keep it at the top only for the 30 seconds of sound.
  4. Hold the phone with the speaker facing down. On most phones the speaker is on the bottom edge, so hold the phone upright with the charging port at the bottom. Then press Start water eject.
  5. Wipe off any drops that come out. Press Play again once or twice more, then let the phone dry.

Which sound to choose

Sound What it plays When to use it
165 Hz tone Short pulses of a low tone for 30 seconds Start with this. It is what most water eject tools use.
Low sweep A tone that glides between 120 and 800 Hz, up and down Try it if the tone didn’t help. Different speakers shake most at different pitches.

What phone makers advise

Do Don’t
Tap the phone gently against your hand, with the charging port facing down (Apple) Don’t dry it with a hair dryer or other heat (Apple)
Leave it in a dry place with some airflow, for up to a day (Apple) Don’t use compressed air (Apple)
Wipe it with a soft, dry cloth, then gently shake it a few times with the speaker facing down (Samsung) Don’t put it in a bag of rice (Apple)
Make a call: the speaker’s movement can clear leftover moisture (Samsung) Don’t push cotton buds or paper towels into the openings (Apple)
Wait until the port is dry before you charge it with a cable (Apple) Don’t charge with a cable while a “liquid detected” warning shows (Apple)

Sources: Apple, If you see a liquid-detection alert on your iPhone; Samsung, How to remove external factors that affect the sound of mobile device; Apple, About Apple Watch water resistance.

Note: Water resistant is not waterproof. If your phone got a drink, salt water or pool water on it, the maker may advise rinsing it with a little tap water first (Apple does for iPhone). Check your phone maker’s advice, and ask a repair shop if anything seems wrong.

If something’s wrong

I hear nothing

  1. Unplug headphones and turn off Bluetooth. The sound may be playing in your earbuds.
  2. Turn the volume up with the side buttons while the sound plays.
  3. On iPhone, turn off Silent mode.
  4. Raise the Volume slider on this page.

The sound is still muffled after the water eject

Give your phone time. Water inside the phone dries slowly, often over several hours. Leave it in a dry place with some airflow, then check again with the sound test.

The sound is muffled, crackly or quiet after a day

Water may have reached the inside, or the speaker may be damaged. Contact the maker or a repair shop. Apple and Samsung both offer service for liquid damage.

The speaker buzzes or rattles while the sound plays

That is often the water itself, or the grille shaking. Turn the volume down a little. If it still buzzes on other sounds after the phone has dried, the speaker may be damaged.

The sound stopped by itself

Each run lasts 30 seconds. It also stops when a call comes in or you switch apps. The page keeps your screen on while it plays, where the browser allows it. To play it once more, press the button again: it reads Start water eject, or Play again after a run that played to the end.

How the water eject works

Your browser makes the sound on your device, with the Web Audio system built into it. Nothing is downloaded, and nothing is sent anywhere.

  • The tone: pulses of a 165 Hz sine tone, 2.6 seconds on and 0.4 seconds off, for 30 seconds. Apple Watch also plays “a series of tones” to clear its speaker, but Apple doesn’t publish their pitch. 165 Hz is the pitch most water eject tools use.
  • The sweep: a sine tone that glides from 120 to 800 Hz and back, three times, over 30 seconds.
  • Level: with the Volume slider at the top, close to the loudest your device can play. The slider starts at 70%; your phone’s own volume buttons matter most. Each run fades in over half a second.
  • Limits: a sound can only shake the speaker and the drops in its grille. It can’t dry the inside of your phone, find out whether water got in, or repair a damaged speaker. The only public test we know of is small: in 2024, iFixit and The Verge saw a low tone push water out of the speaker area of a few phones, while water elsewhere inside stayed (MacRumors report). Treat it as a quick thing worth trying, not a fix.

Questions and answers

Does a water eject sound really work?

It can help with drops that sit in the speaker grille, the small holes on the outside. A low tone makes the speaker move a lot, and that can push those drops out. Apple Watch does the same thing on purpose after swimming.

In a small 2024 test by iFixit and The Verge, a low tone pushed dyed water out of the speaker area of an iPhone and two Android phones. Water elsewhere inside the phones stayed. So it can help the speaker, but it can't dry the inside of your phone, and it can't fix a damaged speaker.

Why 165 Hz?

Apple Watch plays "a series of tones" to clear its speaker, but Apple doesn't say which pitch. 165 Hz is the pitch most water eject sites, apps and the iPhone "Water Eject" shortcut use. It is low enough to move the speaker a lot, and high enough for a small phone speaker to play.

If the tone doesn't seem to help, try the Low sweep. It glides between 120 and 800 Hz, so it passes through whatever pitch shakes your speaker most.

Is it safe for my phone's speaker?

Yes, when you use it as described. It is an ordinary low tone, played for 30 seconds. Phone speakers play sounds like it all day.

Turn the volume back down when you are done. Playing any sound at full volume for a long time is hard on small speakers, and on your ears.

Should I use it with headphones or earbuds?

No. Unplug headphones and turn off Bluetooth earbuds first. The sound is meant for your phone's own speaker. In your ears, a loud low tone is unpleasant and can harm your hearing.

Should I put my wet phone in rice?

No. Apple advises against it, because small bits of rice can get into the phone. Leave the phone in a dry place with some airflow instead.

Can I use a hair dryer or compressed air?

No. Apple says not to dry an iPhone with a heat source or compressed air. Heat can damage the battery and seals, and air can push water deeper inside. Don't push cotton buds or paper into the openings either.

Does this work on Android and Samsung phones?

Yes, the sound plays on any phone with a speaker. Samsung's advice for a wet speaker is to dry the phone with a soft cloth and gently shake it a few times with the speaker facing down.

Some Xiaomi and Redmi phones also have a built-in Clear speaker option in Settings that plays a similar sound.

Does it work on an Apple Watch?

Apple Watch has its own way to clear its speaker. Open Control Center, tap Water Lock, then press and hold the Digital Crown when you are out of the water. The watch plays tones to push the water out.

Can it clean dust out of my speaker?

It may shake some loose dust from the grille, but it won't clear packed dirt.

Apple's advice for an iPhone or iPad: take off the case and any screen protector. Look at the speaker opening. If it is dirty, clean it with a small, soft brush that is clean and dry. Don't use cleaning products or compressed air, and don't push anything into the holes.

Still quiet or muffled after cleaning? See phone speaker not working.