Decibel meter
See roughly how loud it is around you, in decibels, with your microphone.
The sound stays on your device. We don't record or upload it.
Quick start
- Press Start decibel meter, then choose Allow.
- Hold your device still, microphone towards the sound.
- Read the level, and the lowest, average and highest.
How loud is that?
The number is the sound level now, in dB(A), updated several times a second. The words beside it compare it with everyday sounds. Our decibel chart lists many more. Under it you see the Lowest, Average and Highest level since you started, and the chart shows the last minute.
| Level, about | Sounds like | What it means for your ears |
|---|---|---|
| 30 dB | A quiet bedroom at night | WHO’s guide for good sleep is 30 dB(A) or less in the bedroom |
| 40 to 50 dB | A library, a quiet office | Comfortable |
| 60 to 70 dB | Normal conversation | Unlikely to harm hearing, even for a long time (NIDCD: 70 dB(A) or less). A phone reading can be 5 to 10 dB off. |
| 80 dB | Busy street traffic | WHO safe-listening limit for adults: about 40 hours a week |
| 85 to 90 dB | Lawn mower, vacuum cleaner, power tools | NIOSH limit: 8 hours a day at 85 dB(A). You need to raise your voice to be heard. |
| 94 to 110 dB | Headphones at full volume, concerts, sports events | At 94 dB(A), about 1 hour a day (NIOSH). At 100 dB(A), about 15 minutes. |
| 110 to 129 dB | Sirens | Harm can start within minutes |
| 140 dB and more | Fireworks, gunshots | Can harm hearing at once |
Sources: NIDCD (US National Institutes of Health), NIOSH (CDC), WHO-ITU safe listening standard, WHO Guidelines for Community Noise (1999).
Protect your hearing
- Every 3 dB more halves the safe time. 88 dB(A) for 4 hours is as much as 85 dB(A) for 8 hours (NIOSH).
- If you have to raise your voice to be heard an arm’s length away, it is about 85 dB. If you have to shout, it is probably 95 dB or more (NIOSH).
- Move away from the noise, take breaks in a quiet place, or wear earplugs or ear defenders.
- Ringing in your ears or dull hearing after a noisy event is a warning sign. If it doesn’t go away within a day or two, see a doctor.
- If you suddenly lose hearing, especially in one ear or with dizziness, see a doctor straight away. Sudden hearing loss is an emergency (NIDCD).
Adjust the reading
If you have a real sound level meter, you can make this one match it on your device:
- Put your device and the real meter side by side, pointing the same way.
- Play a steady sound, such as a fan, pink noise or music at a fixed volume.
- Open Adjust the reading and press −1 dB or +1 dB until both show the same number.
The adjustment is kept in this browser for next time. Set it again if you use another microphone, or another device.
Note: This is not a calibrated or certified measurement, and it is not for legal or workplace noise checks.
If something’s wrong
The level doesn’t move, or stays very low
- Check that the right microphone is chosen under Microphone.
- Check that the microphone isn’t muted, and that nothing covers it.
- On a laptop, check the input volume in your sound settings: very low settings read too low.
- Make a sound, like a clap, and watch the chart. If it never moves, try the microphone test.
My browser says it blocked the microphone
Press the lock or settings icon next to the address bar, and set Microphone to Allow. Then press Try again. The help on the page shows the steps for your browser.
The numbers look too high or too low
The meter guesses how sensitive your microphone is. Some laptops boost their microphone a lot, and some headsets lower it. Compare with a real meter, and use Adjust the reading. A plugged-in headset microphone also reads differently from the built-in one.
Loud sounds read lower than expected
Your device may turn the microphone down for loud sounds. If the meter says Too loud for your microphone, the real level is higher. On iPhone and iPad, the system can keep adjusting the volume even when the page asks it not to.
The meter stopped by itself
It stops when you switch apps or tabs, lock the screen, or when another app takes the microphone. Your numbers stay on screen. Press Measure again or Try again to start a new measurement.
How the decibel meter works
Your browser reads the microphone on your device. The sound is never recorded, saved or sent anywhere.
- The microphone: we ask your browser to turn off its echo cancellation, noise reduction and automatic volume, which would change the level. Not every browser does this, and the page says what yours reports.
- The weighting: the sound goes through an A-weighting filter that follows the curve in the international standard for sound level meters (IEC 61672-1), closely up to about 10,000 Hz. Above that it counts very high sounds a little less than the standard. In the rare browser without the filters the meter needs, the page shows the plain level in dB instead.
- The level: every sample the microphone sends is counted, and the sound energy is averaged the way a meter’s “Fast” setting does it (an eighth of a second). Average is the energy average since you started (Leq). Lowest and Highest leave out the first half second. Reset readings starts all of them, and the time, again.
- From the microphone’s number to dB: the page can’t know how sensitive your microphone is. It assumes a typical phone microphone, where the loudest steady tone it can take is about 120 dB. Your own adjustment is added on top.
- Limits: expect 5 to 10 dB of error, sometimes more. Most phone and laptop microphones can’t measure below about 30 to 40 dB or above about 110 to 120 dB, and many favour some pitches over others. This is not a calibrated or certified measurement, and not for legal or workplace noise checks.
Questions and answers
How accurate is it?
It is an estimate. Phone and laptop microphones are not made for measuring, and each model hears differently. Browsers and phones can also change the microphone volume. Expect it to be off by 5 to 10 dB, sometimes more.
In a 2014 study by NIOSH, the US workplace safety agency, only a few iPhone sound meter apps came within 2 dB of a professional meter, and no Android apps did. A web page has less control over the microphone than those apps. If you have a real meter, use Adjust the reading to match it.
Can I use it to complain about noise, or for work safety?
No. It is not a calibrated or certified measurement. For a noise complaint, a legal case or workplace noise checks, use a certified sound level meter (class 1 or class 2), or ask your local council or a noise consultant.
What does dB(A) mean?
dB is short for decibels, the unit for how loud a sound is. Every 10 dB more sounds about twice as loud to most people.
The (A) means the level is "A-weighted": deep and very high sounds count less, roughly the way our ears hear at normal levels. Hearing-safety limits are given in dB(A), so this meter uses it too.
What is the "Average"?
The average sound energy since you started (called Leq on real meters). A few loud moments raise it a lot, the way they matter for your ears. That is why it is often higher than the middle of the lowest and highest.
Why does it show a level in a silent room?
Every microphone hisses a little by itself. Most phone and laptop microphones can't measure much below 30 to 40 dB, so a very quiet room reads higher than it really is.
Why does the level stop rising at very loud sounds?
The microphone, or your device, turns itself down for loud sounds, and every microphone has a top limit. When the sound reaches the top of what your microphone sends, the meter says Too loud for your microphone, and the real level is higher. Some devices limit loud sounds before the page sees them, so very loud readings can be too low even without that message.
Does it record me?
No. The sound goes straight into a level meter on your device. Nothing is recorded, saved or sent anywhere. The microphone turns off when you press Stop or leave the page.
Why doesn't my number match another app?
Apps make different guesses about your microphone. Some also use another weighting, or show the peak instead of the level. Put both side by side in a steady sound, and use Adjust the reading if you trust the other one more.