Hearing test
Find the highest pitch you can hear through your headphones.
Quick start
- Put on headphones and turn your volume down.
- Press Start, then set a quiet volume with Play 1,000 Hz.
- Press I can't hear it now when the tone fades away.
How to read your results
Your result is the highest pitch you heard on this setup: these ears, these headphones, at this volume. Other headphones, Bluetooth or another volume can change it a lot.
The pitch is how high a sound is. It is counted in hertz (Hz): how many times the sound vibrates each second. 1,000 Hz is a middle tone, and 15,000 Hz is a very high whistle.
| Your result says | What it means |
|---|---|
| About 15,500 Hz | The highest pitch you heard on this setup. The sweep rounds to 500 Hz. |
| 20,000 Hz or higher | You heard the highest pitch this page plays. |
| Below 4,000 Hz | You didn’t hear any of the high tones. Check your headphones first (see below). |
| Not tested | That side of your headphones didn’t play the 1,000 Hz beeps. |
The two ears are different? Headphones and how they sit can change each side. If your headphones fit both ways, turn them round (left side on your right ear) and test again. A gap in high pitches alone doesn’t mean something is wrong with an ear.
This check can’t tell how well you hear speech.
High pitches and age
It is common to hear fewer high pitches as you get older. These figures come from a clinic study of 162 healthy adults, with special earphones, at controlled levels that can be much louder than the level you set here. They are not a guide to your result: don’t match your number to a row. We can’t give an age for your result.
| Age | Ears that heard 14,000 Hz | 16,000 Hz | 18,000 Hz |
|---|---|---|---|
| 21 to 30 | 100% | 100% | 78% |
| 31 to 40 | 96% | 64% | 20% |
| 41 to 50 | 80% | 39% | 2% |
| 51 to 60 | 59% | 31% | 3% |
| 61 to 70 | 45% | 16% | 0% |
Source: Wang and others, “Extended high-frequency audiometry in healthy adults with different age groups”, Journal of Otolaryngology – Head and Neck Surgery, 2021. The study had no one under 21 or over 70.
For the whole range people hear, and when to get your hearing checked, see human hearing range.
When to get help
If you’re worried about your hearing, see a doctor or a hearing specialist (audiologist). For a free first check, try the RNID online hearing check or the WHO hearWHO app.
Get help today (a doctor, or a health line such as NHS 111 in the UK) if you lose hearing suddenly in one or both ears, if your hearing has got worse over a few days or weeks, or if you have hearing loss with earache, discharge from the ear or dizziness. Quick treatment may help with sudden hearing loss. Don’t wait to try this page.
If something’s wrong
No sound at all
- Press Play 1,000 Hz. Check that your device isn’t muted.
- Check that the sound goes to your headphones, not the speakers.
- Raise your device’s volume a little at a time, while the tone plays.
On iPhone or iPad, turn off Silent mode too.
One side is silent
- Check the cable, or that both earbuds are connected.
- Check your device’s balance setting. It should be in the middle.
- Try the headphone test.
The beeps come out of both ears
Mono audio (an accessibility setting) or spatial audio sends the same sound to both ears, so each ear can’t be tested on its own. Turn it off, then play the beeps again.
- iPhone and iPad: Settings, Accessibility, Audio and Visual, Mono Audio: Off.
- Android: Settings, Accessibility, Audio adjustment (or Hearing enhancements), Mono audio: Off.
- Windows: Settings, Accessibility, Audio, Mono audio: Off. Mac: System Settings, Accessibility, Audio, Play stereo audio as mono: Off.
A buzz, a flutter or a low whistle instead of a high tone
This comes from your equipment, not your ears. Some sound cards and headphones turn very high tones into lower sounds. Turn off sound enhancements (on Windows: Sound settings, your headphones, Audio enhancements: Off), or try other headphones.
The tones stop at a low pitch with Bluetooth
Some Bluetooth connections cut off the highest tones. Headsets in call mode cut off even more. Turn off the headset’s microphone, or use wired headphones. Why call mode does this: Bluetooth headphones sound bad on calls.
My result changes each time
That is normal by a few hundred hertz. Test in a quiet room, sit still, and keep the volume the same. Step by step is slower but steadier than the sweep.
I hear ringing all the time
Ringing or buzzing in your ears that doesn’t stop is called tinnitus. It can make high tones hard to tell apart. Stop if the tones make it worse, and see a doctor if it is new or in one ear only.
How this test works
Your browser makes every tone on your device, with the Web Audio system built into it. Nothing is recorded or sent anywhere.
- Tones: pure tones (sine waves), all at the same level as the 1,000 Hz tone you set the volume with. High tones are never made louder. Each tone fades in, so no click can sound like a high tone.
- Quick sweep: a tone rises from 4,000 Hz to 20,000 Hz in 24 seconds, in one ear. When you press I can’t hear it now, we take off a typical reaction time (0.3 seconds) and the sound delay your browser reports, and round to 500 Hz. If you press late, the result comes out a little high. If the sweep plays to its end, we ask whether you heard it right to the end.
- Step by step: three short beeps at one pitch, starting at 8,000 Hz. Each Yes goes higher, and one step between your last Yes and your first No checks the gap. Once in each ear, at a random turn, no tone plays at all, to catch guesses. You answer once the beeps have ended.
- Limits: we can’t measure how loud a tone is in your ear. Your headphones, how they sit, the room and Bluetooth all change the result. Browsers can’t play above half their sample rate (usually 22,050 or 24,000 Hz), so we stop at 20,000 Hz.
This is not a medical hearing test. Clinics test hearing with calibrated equipment in a quiet room, mostly from 250 to 8,000 Hz, and test higher pitches with special earphones.
Questions and answers
Is this a medical hearing test?
No. It shows the highest pitch you hear through these headphones, at this volume. It can't find hearing loss or say if your hearing is normal.
A doctor or hearing specialist (audiologist) tests each ear with calibrated equipment in a quiet room. For a free first check, try the RNID online hearing check or the WHO hearWHO app.
Can it tell my hearing age?
No. People of the same age hear very different top pitches, and your headphones and volume change the number too. So no number from a web page can tell your age, or the age of your ears.
It is common to hear fewer high pitches as you get older. See High pitches and age above for what one study found, or human hearing range.
What is the mosquito tone?
A very high tone, often about 17,000 Hz, that many young people hear and many adults don't. Step by step goes up to 17,000 and 18,000 Hz, so you can try it. We don't claim that any tone keeps people or insects away.
Why can't I hear 20,000 Hz?
Very few adults can. Many hear nothing above 12,000 to 16,000 Hz, and that is common.
Your equipment matters too. Some earbuds, speakers and Bluetooth connections cut off the highest tones.
Is it safe?
The tones start quiet, fade in and play for a short time. Keep it that way: set a quiet volume with the 1,000 Hz tone, and never turn it up to hear a high tone. Your ears can be harmed by sounds you can't hear well.
Stop if a sound hurts, feels too loud, or makes ringing in your ears worse. Our decibel chart shows which everyday sounds are loud enough to harm hearing.
Do Bluetooth headphones work?
Yes, but some Bluetooth connections cut off the highest tones, and headsets in call mode cut off even more. Wired headphones give the most reliable result. If the page says it can only go up to about 7,000 Hz, turn off your headset's microphone or call mode.
Can I use speakers instead of headphones?
You can, but the result is less useful. Room sound and distance change high tones a lot, and you can't test one ear at a time. Headphones are better.
Can children use it?
Yes, with an adult. An adult should set the volume first, and keep it quiet.