Frame skipping test

Check that your monitor shows every frame, with a photo from your phone or camera.

Press Start the boxes. Then take a photo of the screen with your phone.

Boxes light up one at a time, one for every picture your screen shows. You take a photo of them with a phone or camera, and gaps in the photo show skipped frames. A screenshot won’t work: it copies the picture before your monitor shows it.

The boxes flicker quickly, but each one lights only about once a second. If flashing lights affect you, don’t start this test.

Quick start

  1. Press Start the boxes on the computer you're checking.
  2. Press Full screen, and wait until the page says Ready for a photo.
  3. Photograph the boxes with a 1/10 second shutter.
  4. Pick what your photo shows, then press Show my result.

How to read your photo

Your photo should show a row of lit boxes, one for every picture your screen showed while the shutter was open. At 144 Hz, a photo at 1/10 of a second lights about 14 boxes. The row may carry on at the start of the next line, like text: follow the numbers. Look at the boxes in the middle of the row.

Your photo What it means
An unbroken row Good: no skipped frames. The boxes at each end may be dimmer, because the photo began and ended part-way through a picture.
Dark boxes inside the row Frames are probably skipped. Here one box in five is dark, so a 75 Hz signal is shown at 60 Hz.
Every other box dark Half of the frames are skipped.
One brighter box One picture stayed for two refreshes, usually because the browser was late. That isn’t skipping.
Only one or two boxes The shutter was too short, or it’s a screenshot. Use 1/10 of a second.
Every box lit The photo took longer than the whole grid. Use 1/10 of a second.

The first and last box of a row can also look split or slanted. Phone cameras and monitors both work from top to bottom, so that’s normal. Only dark boxes inside the row matter.

Tip: Take three photos. Gaps in the same rhythm each time mean real skipping. One odd gap can be the camera or a busy computer.

Counting the lit and dark boxes in one stretch tells you how many pictures your monitor really shows. For example, 12 lit and 3 dark at 75 Hz means it shows about 60 a second. The tool works this out when you enter the numbers.

If something’s wrong

These are the most common problems, most likely first.

Dark boxes in the row after overclocking

Your monitor can’t keep up with the rate you set. Lower it in 5 Hz steps, and take a photo after each step.

NVIDIA

  • Open NVIDIA Control Panel.
  • Choose Change resolution, then Customise.
  • Lower the custom refresh rate.

AMD

  • Open AMD Software.
  • Choose Display, then Custom Resolutions.
  • Lower the refresh rate.

CRU (Custom Resolution Utility)

  • Remove the resolution you added, then restart.
  • Still skipping? reset-all removes every custom setting on every screen, then you restart.

Dark boxes at the monitor’s normal rate

  1. Use DisplayPort, or an HDMI cable labelled Premium High Speed or Ultra High Speed, plugged straight into the computer. The cable that came with the monitor is a good start. Docks, adapters and switch boxes can cause skipping.
  2. Use the port the manual names for high refresh rates. Some HDMI ports stop at 60 or 120 Hz.
  3. Update your graphics drivers.
  4. Unplug other monitors for the test.
  5. Still skipping? Contact the seller: the monitor may be faulty.

My phone has no shutter setting

  1. Look for a Pro or Manual mode in the camera app.
  2. Install a free manual camera app, such as Open Camera on Android or Lightroom on iPhone. In Open Camera, first set Camera API to Camera2 in its settings.
  3. Still nothing? Dim the room and turn the monitor’s brightness down. Your camera then picks a longer shutter by itself. If a moon icon or Night mode appears, turn it off.

The page shows a lower rate than I set

The boxes can only light as fast as your browser draws. Check your settings with the refresh rate test. Close other tabs, plug in a laptop’s charger, and keep this window on the monitor you’re checking.

  • Safari holds pages near 60 Hz by default. Use Chrome, Edge or Firefox for this test.
  • Windows laptops: turn off Dynamic refresh rate in Settings, System, Display, Advanced display.
  • iPhone and iPad: Low Power Mode lowers the rate to 30 or 60 Hz.

The page says my browser missed a frame

Your computer was busy for a moment. Close other tabs and apps, wait for Ready for a photo, then take the photo again.

The screen flickers

This test looks for skipped frames, not flicker. To find the cause of flicker, follow our guide why is my screen flickering. It checks the cable, the refresh rate, apps and the brightness, one at a time.

How this test works

The page lights one box on every frame your browser draws, in order. A camera photo with a shutter longer than one frame catches several of them, so it shows a row of lit boxes. If your monitor drops a frame, that box never lights, and the photo shows a dark gap.

The grid has a tenth more boxes than your screen shows pictures a second. So even a 1 second photo never goes round the grid twice, which would hide gaps. The page also times every frame, as the refresh rate test does. When the browser is late, a box stays lit twice (brighter), so the page says to wait and photograph again.

What the test can’t tell you

  • Whether there are gaps. Only your photo shows that, and the page can’t see it.
  • Where a gap comes from, for sure. A page can see when the browser was late, but not every frame the graphics card drops. Gaps in the same rhythm on every photo point to the monitor.
  • Skipping at a rate your browser doesn’t draw. If it draws 60 pictures a second, only 60 Hz is checked.
  • Stutter in games. That comes from the computer or the internet, not the monitor. See game lag or stutter to find out which.

Questions and answers

What is frame skipping?

Your computer sends a number of pictures a second, for example 75 or 144. A monitor that can't keep up, often after overclocking, quietly drops some of them. It still says it runs at 75 or 144 Hz, but motion isn't as smooth as it should be.

Why can't I use a screenshot or a screen recording?

A screenshot copies the picture your computer sends, before the monitor shows it. Frame skipping happens inside the monitor, so only a camera pointed at the screen can see it.

Can I use a Live Photo or Night mode?

No. Live Photo long exposure, Night mode, Pixel Motion mode and HDR blend many short pictures into one. They can hide real gaps or add false ones. You need one photo with a slow shutter, with the flash off.

Why does the page measure my refresh rate?

The boxes light at the rate your browser draws. If it draws 60 pictures a second while your monitor is set to 144 Hz, the photo checks 60 Hz. The page says so, and the refresh rate test helps you fix it.

Is overclocking a monitor safe?

Small overclocks are common, but they're at your own risk and may shorten the monitor's life. Raise the rate in small steps, check each one with this test, and go back as soon as frames are skipped.

Can frame skipping happen without overclocking?

Rarely. At the rated rate it's usually the cable, the port or an adapter. Some HDMI ports can't carry high rates. If it still skips with a good DisplayPort cable at the rated rate, contact the seller.

The boxes look blurred or doubled on my TV. Why?

TVs often add pictures of their own (motion smoothing), which spoils the test. Turn on Game mode and turn off motion smoothing, then take the photo again.

Does this work on a laptop, phone or TV?

Yes, if you can photograph the screen with another camera. Laptop and phone screens are rarely overclocked, so this test matters most for desktop monitors.