Short answer
Take a screenshot and open it on another device: if the line is in it, the computer makes the line. If not, try another screen to tell the screen and its cable from the computer.
This guide is for lines and bands in the picture. If the picture flickers, see why a screen flickers. If the whole screen stays black, see computer on but screen black.
Step 1: look at the line on plain colours
Test it now
Dead pixel test
Plain colours show the line’s shape and colour clearly. They can’t tell a screen fault from a computer fault. Steps 2 and 3 narrow that down.
Many thin coloured lines
Can be: the cable or the screen's electronics
A group of lines, often red, green or blue, from top to bottom. They may change when the picture changes.
Bands across the screen
Can be: the cable or the signal
Wide stripes, or parts of the picture that jump sideways. They can come and go when you move the cable or the lid.
One thin line
Can be: the panel itself
One line of pixels, black, white or a colour, that stays in the same place on every colour.
These are hints, not proof. The next two steps tell you where the fault is.
Step 2: take a screenshot
- The line you see on your screen.
- The same screenshot on another device. No line here points away from the computer’s software.
A screenshot copies the picture the computer makes, before it reaches the screen.
Windows
Press Win PrtScn. Windows saves the picture in Pictures Screenshots.
Mac
Press Shift Command 3. The picture is saved on your desktop.
Chromebook
Press Ctrl and the Show windows key (a box with two lines). The picture goes to your Downloads folder.
Send the screenshot to your phone (by email, for example) or open it on another computer. Don’t judge it on the same screen: the line would cover it there too.
Step 3: try another screen
This check helps when you can’t read the screen well enough to take a screenshot.
- Laptop: plug it into a monitor or TV with an HDMI cable (or a USB-C adapter). The multi-monitor test shows which screen is which.
- Monitor: connect it to another computer, a games console or a laptop, with another cable if you have one.
- TV: use another input, such as the TV’s own apps instead of the cable box.
The line is in the screenshot
The computer makes the line, so the screen is probably fine. Try these in order and look again after each one.
1. Restart the computer
Use Restart, not sleep. A restart can clear a graphics fault caused by software.
2. Set the recommended resolution
A resolution the screen wasn’t made for can draw lines or blurry bands.
Windows
Open Settings System Display. Under Display resolution, choose the one marked (Recommended).
Mac
Open System Settings Displays and click Default.
3. Update or roll back the graphics driver (Windows)
- Right-click the Start button and choose Device Manager.
- Open Display adapters. If the lines started after an update, right-click your graphics card, choose Properties Driver Roll Back Driver (if it isn’t greyed out) and restart.
- Otherwise install the newest driver from your computer maker’s support site, or from Intel, AMD or NVIDIA.
4. Look for one app
If the lines appear only in one game or app, update it and turn off its hardware acceleration, if it has that setting.
5. Undo an overclock and check the cooling
If you overclocked the graphics card, set it back to normal. Make sure the vents aren’t blocked, then test again.
If the lines still appear on every screen you connect, run your computer maker’s hardware check, or have the graphics checked by a repair shop.
The line is only on the screen
The screenshot was clean, so the fault is probably on its way to the glass: the video port, the cable, the screen’s electronics or the panel itself. These checks narrow it down.
Monitor
- Turn the monitor off. Unplug the video cable at both ends and plug it in firmly again.
- Try another cable, and another port on the computer and the monitor. HDMI, DisplayPort and USB-C cables can fail without visible damage.
- Press the monitor’s own menu button. The monitor draws that menu itself. If the lines cross the menu too, the monitor is faulty.
Laptop
- Open and close the lid slowly, without pressing on the screen. If the lines change or jump as the lid moves, the cable through the hinge is the likely cause.
- Plug in a monitor or TV (step 3 above). If that picture is clean, the laptop’s own screen or its cable is the likely cause.
- On a Dell laptop, run the screen self-test. Turn the laptop off. Hold D, press the power button once, and keep holding D until colours fill the screen. Lines on those colours point to the screen or its cable. Press Esc to stop.
TV
- Unplug the HDMI cable at both ends and plug it in firmly. Try another HDMI port and another cable.
- Open an app built into the TV. If the lines show there too, they don’t come from the cable box or console.
- Run the TV’s own picture test. It shows a picture stored in the TV, so lines in it point to the TV itself. Older models use other menus than these:
- Samsung: Settings All Settings Support Device Care Self Diagnosis, then Picture Test.
- LG: Settings All Settings Support Screen Self-Diagnosis.
- On an LG OLED TV with lines in the test, LG suggests Pixel Cleaning first. If the lines stay, contact the maker.
On a phone or tablet
The same screenshot test works: lines on a phone screen has the full steps. Restart the phone first. If the lines are in the screenshot, update the phone and its apps. If they aren’t, the display or its connector may be damaged, for example after a drop or water. Have the phone checked by the maker or a repair shop. A touch screen test shows whether touch still works over the lines.
When it’s the hardware
Lines that stay out of the screenshot, cross the monitor’s own menu or the TV’s picture test, and stay with a new cable, most likely come from the screen.
- Check the warranty first on the maker’s support site, with the serial number. A standard warranty covers faults, not damage from a knock or a drop. Record the lines before you send it, in case they come and go.
- A separate monitor: compare the repair quote with the price of a new monitor. See what a monitor repair costs.
- A laptop: a repair shop can replace the screen or the cable to it.
- Until then: a laptop works with a monitor or TV plugged in.
Questions people ask
Can lines on a screen fix themselves?
Lines from software can go away after a restart or a driver update. Lines that stay out of the screenshot and show on the screen’s own test come from the hardware. They may come and go for a while, but a repair is the lasting fix.
Why did lines appear on my laptop screen after I dropped it?
A drop can crack the panel inside the glass or loosen the screen cable. Take a screenshot: if the lines aren’t in it, the screen or cable needs a repair.
Is a single dead line the same as a dead pixel?
No. A dead pixel is one dot. A line is a whole row or column of pixels, and the dead pixel test shows both. Pixel policies count dots. For a line, ask the maker or the shop about a repair.