Short answer
Press a key, turn the brightness up and, on Windows, press Win Ctrl Shift B. If the screen stays black, connect another screen. A picture there means the computer works, so look at the laptop’s own screen, its light and its cable. No picture anywhere points to the computer.
This page is for a computer that is on (lights, fan or sounds) with a black screen. A phone that rings but stays black has its own steps. Lines or bands in the picture? See lines on your screen.
Try these first
If the computer was installing an update, give it a few minutes first. Then work down the list and stop when the picture comes back.
Windows
- Press a key or move the mouse. Press the brightness-up key; on many laptops hold Fn with it.
- Press Win Ctrl Shift B. This restarts the graphics driver. A beep or a flicker means it worked.
- Press Win P, then P again and Enter. Each time you do this, Windows picks the next screen choice. Try it up to 4 times, waiting a few seconds each time.
- Unplug docks, extra screens and USB devices.
- Press Ctrl Alt Delete. If a menu appears, select the power button at the bottom right, then Restart.
- Still black? Hold the power button for 20 seconds until it turns off, then turn it on again. Work you haven’t saved is lost.
Mac
- Press a key or move the mouse, then press the brightness-up key.
- Unplug extra screens, hubs, drives and printers.
- Press and hold the power button for up to 10 seconds, until the Mac turns off. On a laptop with Touch ID, press and hold Touch ID. Then turn it on again.
A black or grey screen for a short time while a Mac starts up can be normal.
Chromebook
- Press a key, then the brightness-up key.
- Plug in the charger and leave it for at least 30 minutes.
- Do a hard reset: turn the Chromebook off. Hold Refresh and tap Power. Let go of Refresh when it starts. Some models use a reset button instead.
Google says a hard reset can delete some files in your Downloads folder, so try the other steps first.
Find where the picture stops
Still black? Another screen helps you narrow down where the fault is.
- The laptop’s own screen stays black.
- An HDMI cable, or a USB-C adapter, to a monitor or TV.
- A picture on the monitor: the laptop itself works.
Connect another screen. If it shows a picture, the computer works, and the laptop's own screen, its light or its cable is the likely cause.
- Laptop: plug in a monitor or a TV. Choose the right input on it, then press Win P and choose Duplicate, or on a Mac wait a moment.
- Desktop PC: connect the monitor to a laptop or games console, or connect another monitor or TV to the PC.
The monitor says “No signal”
The monitor works, but no picture reaches it.
- Press the monitor’s Input or Source button and pick the port the cable is in.
- Push both ends of the cable in firmly.
- If the PC has a graphics card, plug the cable into the card’s ports, lower down at the back, not the ones near the USB ports.
- Try another cable, and another port on the PC and the monitor.
- Unplug the video cable with the monitor on. Most monitors then show their own message box. If yours shows nothing at all, the monitor may be faulty.
Once you see a picture, the multi-monitor test shows which screen is which. In Chrome or Edge it can list every screen; in Firefox and Safari you drag the window to each one.
Only the laptop screen is black
Another screen shows a picture, so the laptop works. Check the screen settings first. If they don’t help, its own screen, the light behind it or the cable through the hinge is the likely cause.
- With the monitor connected, press Win P and choose Duplicate, then turn the brightness up on the laptop.
- Open the white screen so the laptop shows white, then shine a torch or phone light at its screen from close up.
- Open and close the lid slowly. If the picture flashes on and off, the cable through the hinge is the likely cause.
- Hold the flashlight close to the screen.
- Look for a faint picture in the light, such as a window or the taskbar.
A faint picture under the light often means the screen works but the light behind it has failed. That is usually a repair, not the whole computer.
Dell laptops have a screen self-test. Connect the charger and unplug other devices. Turn the laptop off. Hold D, press the power button, and keep holding D until colours appear. If black, white, red, green and blue show cleanly, the screen hardware works, and Dell points to settings or a driver. Press Esc to stop. If no colours show, have the screen or its cable checked.
Until the repair, the laptop works with the monitor or TV connected.
Black after the logo
The maker’s logo shows, so the screen can show a picture. Most often, Windows or macOS doesn’t finish starting, or a graphics driver fails.
Windows
Only the mouse pointer shows: press Ctrl Shift Esc to open Task Manager. Select Windows Explorer, then Restart. If it isn’t in the list, choose Run new task, type explorer.exe and press Enter.
Nothing shows at all: start in Safe Mode.
- Turn the computer on. When the logo shows, hold the power button until it turns off.
- Do this twice. On the third start, Windows should show Automatic Repair. Choose Advanced options. Windows may ask for your BitLocker recovery key: Microsoft explains where to find it.
- Choose Troubleshoot Advanced options Startup Settings Restart. Then press 4 for Safe Mode, or 5 for Safe Mode with networking.
- In Safe Mode, right-click Start and choose Device Manager. Open Display adapters, right-click your graphics card and choose Properties Driver Roll Back Driver if it isn’t greyed out. Then restart normally.
- Still black? System Restore, in the same Advanced options, can take Windows back to before the problem started.
Mac
Apple’s next step is macOS Recovery. There you can check the startup disk with Disk Utility, or reinstall macOS. Reinstalling keeps your files, but back up first if you can. How you start Recovery depends on your Mac: see Apple’s steps.
No picture on any screen
No logo, no picture, on the laptop or on another screen. Drain the power first. These are Dell’s and HP’s steps for Windows computers; other makers’ support sites have their own.
- Turn the computer off. Unplug the charger or power cable, and every other cable and device.
- If the laptop’s battery comes out without tools, take it out.
- Hold the power button for 15 to 20 seconds.
- Put the battery back, plug in only the charger and turn it on.
Still nothing? Look and listen as it starts:
- Beeps or a blinking light (often the power or battery light) are a code. Your computer’s manual or the maker’s support site says what it means, such as a loose memory module.
- Dell computers have built-in checks: see Dell’s no video steps.
- No beeps, no lights, no fan: the computer may not be getting power. Try another socket and, if you have one, another charger made for your model.
If nothing helps, the computer needs a repair. Ask the shop whether it can save your files first, and tell it not to erase the drive.
Half of the screen is black
Half a black screen often comes from the screen or its cable. These checks tell you.
- Restart the computer.
- On a monitor, open its own menu with its buttons. If the black part covers the menu too, the monitor is faulty.
- On a laptop, connect another screen. If the picture is whole there, the laptop’s screen or its cable is the cause.
For bands, lines and patches, the screenshot test tells the screen from the computer.
When the picture is back
Check the screen while it works.
Test it now
White screen
Look for dark corners, patches or a screen that is dimmer than before. Uneven light can mean the light behind the screen is starting to fail. The test can’t show what caused the black screen.
The dead pixel test shows lines and dark spots on plain colours. If the black screen comes back, write down what you were doing when it happened. It helps the repair shop.
When it’s the hardware
- Check the warranty first on the maker’s support site, with the serial number.
- A laptop screen or its light can be replaced by a repair shop. Until then, use a monitor or TV.
- A monitor: compare the quote with a new one. See what a monitor repair costs.
Questions people ask
Why is my laptop on but the screen black?
Often the screen is off, not broken: low brightness, the wrong screen choice after using a projector, or a graphics driver that stopped. The wake-up keys above fix those. If another screen shows a picture and the laptop’s doesn’t after the settings checks, its screen, light or cable is the likely cause.
Have I lost my files?
A black screen alone doesn’t delete files. They stay on the drive. If the computer needs a repair, ask the shop to save your data first.
Why does my screen go black for a second and come back?
That is often the graphics driver restarting, or a loose cable. If it happens a lot, update the graphics driver and try another cable. See why a screen flickers.
Can a black screen be a virus?
It’s rare. A failed update or a graphics driver is far more likely. Safe Mode and System Restore deal with both.