Monitor gamma test
Check your screen's gamma, blacks and whites, and adjust them by eye.
Press Start the gamma test. Sit where you usually sit, with the room lit as usual.
Four patterns fill your screen, one at a time: dark squares, light squares, fine lines and steps. You answer each one on the screen. Nothing flashes.
Or start with one pattern:
Quick start
- Press Start the gamma test. Your screen fills with dark squares.
- On each pattern, choose what you see, then press Next.
- Press Finish to read your result, and change the setting it names.
How to read your results
The test has four patterns. On each one, you choose what you see.
| Pattern | What you should see |
|---|---|
| Black level: dark squares on black | Squares from shade 4 to 6 onwards, getting easier to see, with black staying black. Shades 1 to 3 often look black, which is fine. |
| White level: light squares on white | Squares from shade 250 or higher, so even the lightest shades show. |
| Gamma: fine lines with grey squares | From a few steps back, the lines look like plain grey. The squares that blend in best show your gamma: about 2.2 is the usual setting. |
| Steps: black to white in 32 steps | Every step is a little lighter than the one before, in grey and in each colour. |
Your result says what each answer means. The gamma squares stand for these settings:
| Gamma | What it looks like | When to use it |
|---|---|---|
| 1.8 | Light and flat; shadows look washed out | Old Macs only. Too light today. |
| 2.0 | A little lighter than usual | A bright room. |
| 2.2 | The usual picture | Everyday use: computers, phones, websites, photos and games. |
| 2.4 | A little darker, with deeper shadows | Films in a dark room. |
| 2.6 | Dark and heavy; shadows lose detail | Rarely right. |
Note: This is an adjustment by eye, not a calibration. Your result reads “about 2.2”, because eyes can’t tell gamma more finely than that.
If something’s wrong
These are the most common problems, most likely first. Before you change anything, turn off what changes the picture by itself: automatic brightness, dynamic contrast, night light or Night Shift, and HDR.
The darkest squares look black (crushed blacks)
- Dim the room and look again. Dark squares are much harder to see in a bright room.
- On the monitor’s menu, choose the Standard or sRGB picture mode, and turn off game modes that change shadows.
- If your gamma also read dark (2.4 or more), pick a lower Gamma setting, such as 2.2.
- On a TV, find the setting that sets how dark black is (often Black level, sometimes Brightness) and raise it one step at a time, until the dark squares just show.
On most computer monitors, Brightness only sets the backlight. It makes everything lighter, but won’t bring back shades that have merged into black.
The lightest squares look white (clipped whites)
- On the monitor’s or TV’s menu, lower Contrast a few steps at a time, until the light squares show.
- Choose the Standard or sRGB picture mode.
Both the darkest and the lightest squares are gone
Your computer and your screen probably disagree on where black and white are. This is called the RGB range: Full uses all 256 shades, Limited only shades 16 to 235. It mostly happens over HDMI.
Most computer monitors expect Full, and many TVs expect Limited unless set otherwise. Choose the same on both ends:
- On your computer:
- NVIDIA Control Panel, Change resolution: Output dynamic range.
- AMD Software, Display: Pixel Format (RGB 4:4:4 Full or Limited).
- Intel Graphics Command Center, Display: Quantization Range.
- A Mac has no such setting: use the screen’s setting, or connect by USB-C or DisplayPort.
- On the monitor’s menu, look for HDMI Black Level, RGB Range or HDMI RGB PC Range. On a TV, look for HDMI range or Black level in the picture settings. Auto is often right.
- Start the test again.
The opposite mismatch makes black look grey and the picture washed out, while every dark square stays easy to see. The same two settings fix it.
Your gamma is too dark or too light
- Choose the Standard or sRGB picture mode on the monitor’s menu.
- Change the Gamma setting: a lower number makes the picture lighter, a higher number darker. Aim for 2.2.
- No such setting? On Windows, search for Calibrate display color and follow its gamma step. On a Mac, use the Display Calibrator Assistant in System Settings, Displays, Color profile.
The gamma lines look blurred, wavy or striped
The picture is being resized on its way to the screen, and the gamma squares can’t be read. Check these:
- Set your browser’s zoom to 100%: Ctrl and 0 (Windows), ⌘ and 0 (Mac). Don’t pinch-zoom on a phone or tablet.
- Set the screen to its own (recommended) resolution, and display scaling to 100% if you can.
- On a Mac, choose the Default size in System Settings, Displays. “Scaled” sizes resize the whole picture.
- On an iPhone, set Display Zoom to Default in Settings, Display & Brightness.
- On a Samsung phone, choose the highest Screen resolution in Settings, Display.
- On a TV, turn off overscan (look for Just Scan, Screen Fit or Picture size: Original).
You’re using a laptop, phone or tablet
These have no gamma or contrast setting. Turn off automatic brightness, True Tone and Night Shift (Apple), Adaptive brightness and Eye Comfort (Android). On Windows laptops, also turn off the battery setting that changes brightness with what’s on screen (Settings, System, Display, Brightness). On Android, try the Natural screen mode. On Windows, use Calibrate display color; on a Mac, the Display Calibrator Assistant.
HDR is on
In HDR, Windows shows ordinary pictures with lighter dark shades. Turn HDR off in Settings, System, Display, then test again. For HDR films and games, use the Windows HDR Calibration app.
How this test works
Gamma is how a screen spreads its shades between black and white. It decides whether shadows look deep or washed out, and whether middle greys look right.
The gamma pattern uses an old trick. Lines that are one dot white and one dot black give very nearly half the light of white. The grey that matches that half depends on the screen’s gamma: shade 186 on a 2.2 screen, shade 191 on a 2.4 screen. So the grey square that blends into the lines tells you the gamma. The lower half does the same with one white line in four.
This only works when each line is exactly one dot on your screen. If anything resizes the picture, the lines blur together and the reading comes out wrong, usually too low. Many gamma tests go wrong here, especially on phones and on computers with display scaling. This test draws the lines in your screen’s own dots, and warns you when your browser can’t promise that.
Before you start
- Leave the screen on for a few minutes.
- Light the room as you usually do.
- Sit where you usually sit, looking straight at the screen.
See how we test screens for where our limits come from, and what a browser can’t measure.
What the test can show
- Whether dark and light shades show, or merge into black or white.
- About how your screen’s gamma looks through this browser and your current settings. It may not match the number on your monitor’s Gamma setting.
- Signs that your computer and screen disagree on the RGB range.
What it can’t show
- Anything by itself: the browser can’t see your screen, so your eyes do the checking.
- Resizing by your system or screen that the browser can’t see, such as a Mac’s “scaled” resolutions or an iPhone’s Display Zoom. Blurred or wavy lines give it away.
- Colour accuracy, brightness or contrast ratio: those need a measuring device.
Patterns for banding, backlight bleed and dead pixels are on the color banding test, the backlight bleed test and the dead pixel test.
Questions and answers
Is this a monitor calibration?
No. It's an adjustment by eye. Your eyes judge the patterns, and you change your screen's settings until they look right. A real calibration needs a measuring device called a colorimeter, which measures the light and writes a colour profile. Our guide calibrate your monitor shows how far you get without one.
Should my gamma be 2.2 or 2.4?
Use 2.2 for everyday use. Windows, Macs, phones and most websites, photos and games expect about 2.2. Gamma 2.4 is darker in the shadows and suits films in a dark room. Old advice to use 1.8 on a Mac dates from before 2009.
I can't see the first few dark squares. Is my screen broken?
No. Shades 1 to 3 give almost no light, and many good screens show them as black, especially in a lit room. Seeing squares from shade 4 to 6 up is normal. Only worry if the first 10 or more look black.
What's the difference between Brightness and Contrast?
On most computer monitors, Brightness sets the backlight: the whole picture gets lighter or darker. Contrast sets how bright white is, and too much of it makes the lightest shades merge into white. On a Dell monitor, see how to adjust its brightness.
On TVs the names differ. Brightness, or Black level, sets how dark black is, and Backlight sets the light behind the picture.
Why do my blacks look grey?
On most LCD screens, black glows a little because the backlight shines through. That's normal, and you see it most in a dark room. If black looks grey in a lit room and every dark square is easy to see, the black level is too high, or your computer and screen disagree on the RGB range.
My game says "adjust until the logo is barely visible". Do I do that first?
Set up your screen with this test first, so other games, films and websites look right too. Then use the game's own slider. Gaming modes that lift shadows, like Black eQualizer or Shadow Boost, help you see enemies in the dark, but they make everything else look washed out.
Does it work on a phone, a laptop or a TV?
Yes. Phones and laptops have no gamma setting, but you can still check them and try their screen modes. On an iPhone, Display Zoom set to Larger Text resizes the picture, so the gamma lines can't be read. On a TV, open this page in the TV's browser, or connect a computer to the TV.
Is this test safe if I have photosensitive epilepsy?
Nothing flashes. The pattern changes only when you press a button, a key or swipe, and never more than 3 times a second. On a few screens, the fine lines of the gamma pattern may shimmer a little.
Does this page record anything?
No. The patterns are drawn in your browser, and we don't see your screen. Your answers stay in this browser.