New monitor test

Check your new monitor step by step, before the return window closes.

Press Start the check. You can skip any step and come back to it.

Five short steps check your new monitor for faults worth catching before the return period ends. It takes about 5 minutes.

The steps:

  1. Dead and stuck pixels: dots that stay dark or bright.
  2. Light leaks: light at the edges of a black screen.
  3. Even brightness: patches or a tint on grey and white.
  4. Refresh rate: is it as fast as the box says?
  5. Resolution: does your computer use all its pixels?

Before you start:

  • Open this page on the new monitor.
  • Wipe the screen with a dry, soft cloth.
  • If you can, let it warm up for 30 minutes at your normal brightness.
  • For step 2, you will dim the room lights for a moment.

Quick start

  1. Open this page on the new monitor, then press Start the check.
  2. Do each step, then choose what you saw.
  3. Read your report, then download or print it.

How to read your results

Your report starts with one of four words.

What you see What it means
Problem found You saw a dark dot: a dead pixel. It doesn’t come back by itself. Contact the shop while you can still return the monitor.
Needs attention You saw something worth a second look: a bright dot, light at the edges, patches or a tint, or a setting below what the box says. It may be normal, or a fault. The report says how to check.
Not fully tested You skipped one of the first three steps, or didn’t look at all its screens. A step you skip can’t find anything.
Passed You saw no faults in the steps you did. That is a good sign, not proof that the monitor is perfect.

Each step adds one line: what you chose, and how many screens you looked at. The refresh rate and resolution lines show what we measured, next to what the box says if you chose it.

Step What a fault looks like
Dead and stuck pixels A dot that stays dark, bright or one colour on every colour.
Light leaks Light at the edges or corners of a black screen that stays when you move your head.
Even brightness Cloudy patches, darker edges or a colour tint on grey or white.
Refresh rate Fewer hertz (Hz) than the box says. Usually a setting or the cable.
Resolution Fewer pixels than the box says. Text then looks soft or blurry.

The report also lists what this test can’t tell you, and what to do next. Download or Print it, and keep it with your receipt: it shows what you checked and when.

Tip: Take a photo of any fault, and note where it is on the screen. A shop can then see what you saw.

Monitor works, but looks small, soft or slow? See set up a new monitor.

Bought an OLED monitor? See how likely OLED burn-in is, and how to lower the risk.

Replacing an older monitor? See where to sell your old monitor.

If something’s wrong

These are the most common problems, most likely first.

I see a dot that doesn’t change

Wipe the screen gently with a dry, soft cloth. If the dot moves or goes, it was dust. If it stays in the same place on every colour, it is a pixel.

  1. In the colours, press Mark a dot and tap it, so your report lists where it is.
  2. Take a photo of it on white (a dark dot) or black (a bright dot).
  3. Contact the shop before the return period ends. Return periods are often 14 or 30 days from delivery: check your receipt.

A bright or coloured dot may be a stuck pixel. The stuck pixel fixer can sometimes free it.

Light leaks in at the edges

Turn the room lights on and look again from where you sit. Makers judge light leaks in normal room light. Move your head from side to side: a glow that changes is IPS glow, which is normal. Light that stays is backlight bleed. If you can see it with the lights on, show the shop. The backlight bleed test has more screens and photo tips.

The refresh rate is lower than the box says

  1. Open your display settings and choose the highest refresh rate. On Windows: Start, Settings, System, Display, Advanced display.
  2. Use the cable that came with the monitor. DisplayPort, or HDMI 2.0 or newer, carries high rates.
  3. Check the monitor’s own menu. Some reach their top rate only on one port, or with a setting turned on.

Then open the step again and measure. The refresh rate test explains each reading.

The resolution is lower than the box says

Open your display settings and choose the resolution marked Recommended. If it isn’t offered, update your graphics driver and check the cable. Set your browser’s zoom to 100% before you look again. The screen resolution page shows how.

The colours don’t cover the whole screen

Some browsers can’t go full screen, such as Safari on an iPhone. The screens then fill the browser window. On a computer, press F11 (on a Mac, Control, Command and F) to make the browser full screen, then start the step again.

I closed the page by mistake

Open it again in the same tab, or press reload. Your answers so far are kept in this tab, and the test carries on where you were. To start afresh, press Start over.

How this test works

The test takes you through five steps, one at a time. Each step uses one of our tests, in a shorter form.

  1. Dead and stuck pixels: 6 colours from the dead pixel test. A colour counts once it has been on the screen for a second.
  2. Light leaks: black and two very dark greys from the backlight bleed test.
  3. Even brightness: four greys and white, the last one with faint moving bands.
  4. Refresh rate: the refresh rate test measures how often your browser draws the page for 3 seconds.
  5. Resolution: the screen resolution page’s reading of the pixels your computer uses.

The browser can’t see your screen, so in the first three steps your eyes do the checking and you tell us what you saw. The refresh rate and resolution are what your computer sends to the monitor. They show a wrong setting, not what the panel itself can do.

Any step can be skipped, and you can go back to change an answer. Skipping one of the first three makes the report “Not fully tested”, never “Passed”. The last two are settings, which you can fix at home, so skipping them doesn’t.

See how we test screens for where our limits come from, and what a browser can’t measure.

What it can’t check

  • Colour accuracy, brightness, contrast and HDR: these need a measuring device.
  • Response time, ghosting and blur in fast motion, and adaptive sync such as G-Sync or FreeSync.
  • Colour banding in smooth gradients.
  • The ports, speakers, stand and buttons. Try each one by hand.
  • Faults that appear later, such as a pixel that dies after a few weeks.

Your answers and your report stay in this browser. We don’t upload them.

Questions and answers

How many dead pixels are acceptable on a new monitor?

There is no single rule. Each maker has its own pixel policy, and some differ by model and country. Some promise no bright dots at all on some models. Others replace a monitor only above a set number of dots. Our dead pixel policy guide lists the limits brand by brand.

Inside the shop's return period, you usually don't need to count dots: if you are not happy, ask for an exchange or a refund. After it, you may still have rights against the shop under your country's consumer law, and the maker's warranty applies: its pixel policy decides a warranty claim.

Should I return a monitor with one dead pixel?

That is your choice. One dark dot near the edge may never bother you. One in the middle, or a bright dot, often does. Look at it from where you sit, for a few days if you can, but decide before the return period ends. Another monitor of the same model may be better or worse. To find your last return day, see new device return window.

Is backlight bleed normal on a new monitor?

A little light at the edges of a black screen is common on LCD monitors, especially in a dark room. Makers judge it in normal room light. If you can see it with the lights on, or it spoils films and games, show it to the shop. A glow in the corners that changes when you move your head is IPS glow, which is normal.

My new 144 Hz monitor only runs at 60 Hz. Why?

Your computer often starts a new monitor at 60 Hz. Change the refresh rate in your display settings. If the higher rate isn't offered, the cable or port may not carry it: use DisplayPort, or HDMI 2.0 or newer, and plug into the graphics card on a desktop PC.

This is usually a setting or the cable, not a fault. If the rate on the box still isn't offered with the right cable and port, contact the shop before the return period ends. For each setting in order, see set up a new monitor.

How long should a new monitor warm up before I test it?

About 30 minutes, at your normal brightness. Uneven patches and tints change as the backlight warms up. Dead pixels and light leaks show at once.

Can this test check colour accuracy or HDR?

No. Colour accuracy needs a measuring device called a colorimeter. A browser also can't measure HDR, brightness, contrast or response time. Your report lists what it couldn't check.

Can I use it on a laptop, TV or phone?

Yes. It works on any screen with a browser. On an iPhone, the colours fill the browser window, so Safari's bars cover the very top and bottom. The refresh rate and resolution steps matter most on a computer monitor.

Are my answers saved?

Your answers stay in this browser tab until you close it, so a reload doesn't lose them. Your finished report is saved in this browser on this device, so you can compare it after an exchange. We don't upload them.

Guides for this test