Mouse test
Check that every button and the scroll wheel on your mouse work.
Quick start
- Click in the test box with each mouse button. On a phone or tablet, tap it.
- Scroll the wheel up and down. Each part gets a tick.
- When the main parts have worked, the test says so. Press Show my result to see your result.
How to read your results
| What you see | What it means |
|---|---|
| A plain button | Not clicked yet. |
| A filled-in button | Held down right now. |
| A button with a tick | It worked. Your computer got the click. |
| A button with an exclamation mark | It clicked twice faster than a finger can. It may double-click by itself. |
The table beside the mouse counts for each button:
| Column | What it counts |
|---|---|
| Clicks | Every press of the button. |
| Extra clicks | Two clicks closer than 80 ms, or a click that comes back right after you let go. A finger can’t click that fast, so this should stay at 0. Your own double-clicks don’t count here. |
Under Wheel, each direction counts how many times your browser saw the wheel turn that way. A wheel with clicks counts one for each notch; a touchpad or a smooth wheel counts many. Left and right are for wheels that tilt.
The counters above the box count the main parts: the left, right and middle buttons, and the wheel up and down. Side buttons and tilt are extra. When all the main parts have worked, the bar above the box says so and shows the Show my result button.
- Left button
- Wheel: turn it to scroll, press it for the middle button
- Right button
- Forward (side button)
- Back (side button)
Tip: Not tested yet doesn’t mean broken. It means the test hasn’t seen that part. Side buttons and wheel tilt are only on some mice, so you don’t need them for a good result.
Press Show my result and the result takes the place of the test. It says what worked, for example “All buttons and the wheel worked.” If something is missing, it names it, such as “Not tested yet: Middle button (wheel click).” To test more, press Continue test: your counts are kept. Then press Show my result again.
The Event log under the box shows the last 20 clicks and wheel turns, with the time between them.
Hold and drag test
A worn button can let go by itself while you hold it. Then a file you drag drops in the wrong folder, or you stop aiming in a game. To check it:
- Under the test box, choose Hold and drag.
- Choose how long to hold: 10 seconds for a quick check, 30 or 60 seconds for a button that fails now and then.
- Press and hold the button in the white box, and draw. Keep holding until the time is up.
- Read the list under the box. To check another button, press Test again and hold that one.
| What you see | What it means |
|---|---|
| No let-go seen | Your browser saw the button stay down the whole time. It doesn’t let go by itself, at least for now. |
| A number with a double ring, “Very short: probably the button” | The button let go and came back in less than 50 ms. That’s faster than you can lift a finger and press, so the switch is probably worn. |
| A number with one ring, “You, or the button” | The button was up longer. If your finger stayed on the button, it let go by itself. |
| When and Up for | When it let go, counted from your first press, and how long it stayed up. |
Note: Your browser only sees the button go up and down. It can’t tell when you let go on purpose. If you lifted your finger, press Test again and hold the button the whole time.
This test needs a mouse or a touchpad that clicks. A finger on a phone or tablet screen can’t show a button that lets go.
If something’s wrong
These are the most common problems, most likely first.
One click opens things twice
The button sends two clicks when you press once. You see Extra clicks go up, or a button with an exclamation mark.
- Check it first: press Reset test, then click the button slowly, once a second, 20 times.
- If Extra clicks goes up again, blow compressed air around the button and check again.
- If it still happens, the switch inside is worn. Use the warranty, or replace the mouse.
Note: Some mouse apps have a “debounce” setting. A higher value can hide the extra clicks.
A dragged file drops by itself
The button lets go for a moment while you hold it. The Hold and drag test shows a number where it happened.
- Check it first: press Test again and hold the button firmly for 30 seconds.
- If it lets go again, blow compressed air around the button and check again.
- In your mouse’s app, set a higher “debounce” time, if it has one.
- If it still lets go, the switch inside is worn. Use the warranty, or replace the mouse.
Tip: On Windows, ClickLock lets you drag without holding the button. Open Settings, then Bluetooth & devices, then Mouse, then Additional mouse settings, and turn on ClickLock on the Buttons tab. It helps until you replace the mouse.
A button doesn’t light up
- Click in the middle of the box, not on the buttons below it.
- Press the button firmly in the middle.
- Did your mouse’s app give the button a shortcut? Then the test can’t see it. Set it back to a normal click in the app.
- Try it in another app. If it fails everywhere, the button needs repair.
Nothing lights up
- Check that the pointer moves. If it doesn’t, check the cable or the USB receiver, or charge the mouse.
- For a Bluetooth mouse, connect it again in your settings.
- Click inside the box. Clicks outside it don’t count.
The wheel jumps or scrolls the wrong way
Dust or wear in the wheel makes it slip. The test warns you when the wheel goes the wrong way for a moment. It checks this for a mouse, not for a touchpad.
- Check it first: press Reset test and scroll slowly in one direction.
- If it jumps again, blow compressed air into the gap around the wheel while you turn it.
- If it keeps jumping, the wheel is worn.
Double-clicking doesn’t open files
If both clicks of your double-click show up under Clicks, your mouse works. Your computer’s double-click speed may be too fast for you.
Windows
- Open Settings, then Bluetooth & devices, then Mouse.
- Choose Additional mouse settings and slow down the double-click speed.
Mac
- Open System Settings, then Accessibility, then Pointer Control.
- Change the double-click speed.
For more ways to make clicking easier, see make your mouse easier to use.
The side buttons don’t light up
Safari, and every browser on an iPhone or iPad, doesn’t report side buttons: on a computer, use Chrome, Edge or Firefox. On Android, the phone may use the Back button itself and go back a page. If your mouse has an app, check that the side buttons are set to Back and Forward.
A touchpad doesn’t right-click
Tap with two fingers, or click in the bottom right corner. Check that right-click is turned on in your touchpad settings. Press Change under the box and choose Touchpad: a touchpad has no middle button.
A wireless mouse misses clicks
Move the USB receiver closer, for example with a USB extension cable. Put in a new battery, or charge the mouse. See how long wireless mouse batteries last.
How this test works
Your browser tells the page each time a button goes down or up, and each time the wheel turns. The test counts them for each button and direction. A part counts as working once the browser reports it.
In the box, the test stops the browser’s own actions: the right-click menu, Back and Forward on the side buttons, and scrolling the page. Some systems use the side buttons before the browser sees them, such as Android and some mouse apps. Then Back can still leave the page. Outside the box, your mouse works as usual.
See how we test mice and touchpads for where our limits come from, and what a browser can’t measure.
What the test can see
- Each button: left, right, middle, and the two side buttons.
- The wheel turning up, down, left and right.
- Clicks that come too close together, and a wheel that jumps.
- A button that lets go while you hold it (in Hold and drag).
What it can’t see
- Buttons your mouse’s app has turned into shortcuts.
- How hard you press, or how fast your mouse moves.
- The difference between a broken button and one you didn’t press.
- Whether you let go of a button on purpose.
Times in the event log come from your browser. They are not your mouse’s speed.
Questions and answers
Why does one click show as two?
Click each button slowly, once a second, about 20 times. Then look at the Extra clicks number. It counts two clicks closer than 80 ms, which a finger can't do, and a click that comes back right after you let go. If it goes above 0, your mouse sent two clicks for one press.
That is the most common mouse fault. The switch under the button is worn or dirty.
What do the side buttons on a mouse do?
Most mice come with the two side buttons set to Back and Forward. Back is usually the one nearer your wrist. In a web browser, Back opens the page you saw before, and Forward goes ahead again. On Windows, File Explorer uses them too.
On a Mac, Chrome and Firefox use them, but Safari and the Finder ignore them unless your mouse's app gives them a job. That app, such as Logi Options+ or Razer Synapse, can set each side button to something else: copy and paste, volume, or a key in a game.
In the test box, both buttons are paused, so the page stays open while you check that they work.
What is the extra-click limit?
Two clicks closer than the limit count under Extra clicks. The limit starts at 80 ms, faster than anyone can click on purpose, so your own double-clicks don't count. To change it, press Change under the box. A longer limit finds more extra clicks, but may also count your own quick double-clicks.
Can I test a touchpad?
Yes. Press Change under the box and choose Touchpad. Click, or tap with one finger for a left click. Tap with two fingers for a right click. Scroll with two fingers, up and down, then left and right.
Can I test a mouse on my phone or tablet?
Yes, on an Android phone or tablet and on an iPad. Connect the mouse by Bluetooth or USB, then click in the box. On Android, the Back side button may take you back a page, because the phone uses it before the browser sees it.
Without a mouse, the test checks touch instead: tap, double-tap, and press and hold.
Why don't my side buttons light up?
Safari, and every browser on an iPhone or iPad, doesn't report the side buttons. On a computer, try Chrome, Edge or Firefox. If they still don't light up, your mouse's app may have given them another job, such as a shortcut. Check the app's button settings.
I swapped my buttons for my left hand. Which one is Left?
The test shows the buttons as your computer uses them. Your main button shows as Left button, even if it sits on the right.
Why does my mouse let go when I drag?
Most often the switch under the button is worn. While you hold it down, it opens for a moment by itself, so a dragged file or a held item in a game drops. Choose Hold and drag under the test box, then hold the button and draw for 10 seconds. Each time it lets go, you see a number on the drawing.
The test can't tell when you let go on purpose. If you lifted your finger, press Test again and hold the button the whole time.
Does this test measure my mouse's speed or DPI?
No. This test checks that each button and the wheel work. To see how often your mouse reports its position, try the mouse polling rate test.
Guides for this test
- Mouse Not Working? Fixes for Wired, Wireless and Bluetooth MiceMouse not moving, clicking or connecting? Test it, then follow the fix for what you see: dead mouse, lag, missed clicks or a lost pointer.
- How To Tell if Magic Mouse Is ChargingThe Magic Mouse has no charging light. See its battery and charging status on a Mac or iPad, how long a charge lasts, and what to do if it won't charge.
- How To Reset Your Mouse (Logitech, Apple and Others)Reset a wireless or Bluetooth mouse: turn it off and on, change the battery, pair it again, fix Logitech receivers and Magic Mouse, and reset pointer settings.