Tone generator

Play a tone at any pitch, or noise or a sweep, on the left, the right or both sides.

440 HzNote A4Both sides

Warning: Turn your device's volume down before you press Play. The sound starts quiet. Raise it slowly.

Sound

In hertz (Hz): vibrations per second. A higher number sounds higher.

Common pitches
Wave shape

Sine is the purest, smoothest sound.

Play on
30%

Start low. Your device's own volume still applies.

Download as a sound file (WAV)

The file plays at the volume set above, with a short fade in and out. It is made on your device.

Quick start

  1. Turn your device's volume down first.
  2. Type a pitch, or press 440 Hz.
  3. Press Play tone, then raise the volume slowly.

What to play

The pitch is how high or low a tone sounds. It is counted in hertz (Hz): how many times the sound vibrates each second. These pitches are the most useful:

Pitch What it is for
50 Hz or 60 Hz The hum of mains electricity (50 Hz in Europe, Asia and Africa, 60 Hz in North America). Hum in a sound system is often this pitch, or double it.
100 Hz Deep bass. Checks a bass speaker. Subwoofers go lower, to about 30 Hz.
440 Hz The note A above middle C. Musicians tune to it.
1,000 Hz The standard test tone. Use it to set a comfortable volume.
10,000 Hz High treble. Checks tweeters and earbuds. Many adults hear it only faintly.

Singers can play a note to sing along with. The vocal range chart lists the notes of each voice type, with their Hz.

The wave shape changes how the tone sounds, not its pitch:

Wave shape How it sounds
Sine Pure and smooth. Best for testing speakers and tuning.
Square Hollow and buzzy, like an old video game.
Sawtooth Bright and harsh, like a buzzer.
Triangle Soft, between sine and square.

Noise plays every pitch at once. White noise is a bright hiss, pink noise sounds like steady rain, and brown noise is a deep rumble like a waterfall. Noise is good for checking that both speakers sound the same.

Several tones: press Add a tone to play up to 4 tones together. Use it for chords (440, 550 and 660 Hz make an A major chord) or to hear beats: two tones a few hertz apart pulse as many times a second as the difference. Each tone has its own Level, to make one quieter than the others; Volume still changes them all.

A sweep glides from one pitch to another. Play Full range to hear where the sound fades in and out: that is where your speakers, or your ears, reach their limits. Play Bass only to find rattles and buzzing.

Tip: Every sound plays at about the same average level, so switching rarely jumps. Square and sawtooth waves, and noise, play a little lower, because they sound louder. Very deep and very high tones, and brown noise, still sound quieter to your ears. Don’t turn the volume up for them.

If something’s wrong

No sound at all

  1. Press 1,000 Hz, then Play tone. Very low and very high tones can be silent on some speakers.
  2. Check that your device isn’t muted, and that the sound goes to the speakers or headphones you are using.
  3. Raise your device’s volume a little at a time, while the 1,000 Hz tone plays.
  4. Still nothing? Raise the Volume slider on this page a little.

On iPhone or iPad, turn off Silent mode too.

A very high or very low tone is silent

This is usually normal. Your speakers may not play it, or your ears may not hear it. Don’t turn the volume up to hear it. Try headphones or bigger speakers instead.

The sound buzzes or rattles

  1. Turn the volume down. Speakers buzz when they are pushed too hard, mostly with deep tones.
  2. Play a Bass only sweep quietly. Note the pitch where it rattles.
  3. Check for loose parts, screws or objects near the speaker.

If it still rattles at a low volume, the speaker may be damaged.

Clicks or gaps when I change the pitch

The tone glides smoothly to a new pitch, so the page itself doesn’t click. Clicks or gaps can come from Bluetooth. Try wired headphones, or move closer to your device.

Sound on one side only

  1. Check Play on: it may be set to Left or Right.
  2. Check your device’s balance setting. It should be in the middle.
  3. Choose Both. If one side is still silent, try the headphone test or the sound test.

The sound stopped by itself

A sweep stops at its end. A tone or noise stops when your phone locks, when a call comes in, or when you change the speakers. Press Play again.

How the tone generator works

Your browser makes every sound on your device, with the Web Audio system built into it. Nothing is downloaded, and nothing is sent anywhere.

  • Pitch: set to a hundredth of a hertz, from 1 to 20,000 Hz. It comes from your device’s sound clock, which can be off by a tiny amount: a few hundredths of a hertz at 440 Hz. Changes glide over a few hundredths of a second, so they don’t click.
  • Several tones: each tone plays at its level divided by the square root of the number of tones. Tones at different pitches then keep the average level of one tone. Tones at the same pitch add up and sound louder, but even 4 of them at full volume stay well below the point where the sound is cut off.
  • Sound files: the WAV file is made on your device from the same sound, faster than it plays: 16-bit, 44,100 samples a second, mono for both sides or stereo for one side.
  • Level: sine and triangle waves play at the same average level. Square, sawtooth and noise play 3 dB lower. Every sound fades in over 0.3 seconds, and the volume starts at 30%. Press Stop, or the Esc key on a keyboard, to stop.
  • Sweep: the pitch rises (or falls) by the same number of octaves each second, which is how we hear pitch.
  • Limits: we can’t measure how loud the sound is in your ears or in the room. Bluetooth and some speakers cut off the highest tones. That depends on your device, its volume and your speakers. This page is not calibrated, and it is not a hearing test.

Questions and answers

Is this a hearing test?

No. A tone generator plays sounds. It can't measure your hearing, because the sound also depends on your speakers, your headphones and the volume. To find the highest pitch you can hear, one ear at a time, use the hearing frequency test. It is not a medical hearing test either.

If you think your hearing has changed, see a doctor or a hearing specialist. They test each ear with calibrated equipment.

Is it safe for my ears and my speakers?

The tone starts quiet and fades in. Keep it that way: find a comfortable level at 1,000 Hz, and don't go much louder for other pitches.

Never turn the volume up to hear a very high or very low tone. Your ears may not hear it, but they can still be harmed. Loud deep tones can also damage small speakers.

Why can't I hear 15,000 or 20,000 Hz?

That is normal. Young people can hear up to about 20,000 Hz, but the top limit drops with age. Many adults hear nothing above 12,000 to 16,000 Hz.

Some speakers, earbuds and Bluetooth connections also cut off the highest tones. See how high people hear at each age.

Why can't I hear the deep tones on my phone or laptop?

Small speakers can't move enough air for deep bass. Most phone and laptop speakers play little below 100 to 200 Hz. Use headphones or bigger speakers for deep tones.

Can I tune an instrument with it?

Yes. Choose the note in Musical note, or press 440 Hz for the A above middle C. Tune until the beating (a slow wobble in the sound) stops.

The pitch is set to a hundredth of a hertz and comes from your device's own clock. That is close enough for tuning. Under the pitch you see the nearest note, and how far off it is in cents (hundredths of a semitone).

Can it help with tinnitus?

You can use it to find a tone that sounds like your tinnitus, so you can describe it to a doctor. It isn't a treatment. Keep the volume low, and ask a doctor or hearing specialist for advice.

Do "healing frequencies" such as 432 Hz or 528 Hz work?

You can play any of them here. But there is no good evidence that a tone or frequency heals the body. We don't make health claims.

Does it keep playing in the background?

On a computer, yes. The sound plays on when you switch to another tab, until you press Stop or close the page.

On phones and tablets it stops when you switch apps, switch tabs or lock the screen.

Can I play several tones at once?

Yes, up to 4. Press Add a tone under the wave shape. Each tone gets its own pitch, wave shape and Level, and you can change them while they play. Remove takes a tone away again.

Each tone is turned down a little when you add one, so the sound never goes past its limit and doesn't crackle. Tones at the same or almost the same pitch can still sound louder together, so keep the volume low. Two tones a few hertz apart beat: the sound pulses as many times a second as the difference, for example 4 times a second for 440 Hz and 444 Hz.

Can I download the tone as a sound file?

Yes. Open Download as a sound file (WAV), choose how long it should be, and press Download WAV. The size is shown before you download: 30 seconds is about 2.6 MB. Ten minutes is about 53 MB.

The file holds what Play would play: all your tones, or the noise or the sweep, on the side you chose, at the volume set on the page. It fades in and out, so it doesn't click. It is made on your device, nothing is uploaded. On iPhone and iPad it goes to the Files app (Downloads).

Can I share a tone?

Yes. The address in your browser changes with your settings, for example /tone-generator?hz=1000&wave=square. Added tones are in it too. Press Copy link and send it.

The link opens the same settings, but never plays by itself, and always at the quiet starting volume.

Can I play the tone through other speakers or headphones?

Yes, in most browsers on a computer. Choose them in the Play through list under the volume. Firefox shows a Choose speakers button instead. Chrome, Edge and Safari on a Mac show the list only while this site may use your microphone. Otherwise, and on phones and tablets, change the output in your device's sound settings.

Why does my music stop when I press Play on iPhone?

On iPhone and iPad with iOS 17 or later, the tone plays like a video, so you hear it even in Silent mode. Like a video, it pauses music from other apps. Start your music again when you are done. On older versions, turn off Silent mode to hear it.

Guides for this test