Short answer

Leave IPv6 on, and turn it on in your router if your provider offers it. Your devices use IPv4 and IPv6 side by side, so websites keep working either way. Turn IPv6 off only when a test shows it’s broken, and only until it’s fixed.

Step 1: test IPv6 on your connection

Test it now

IPv6 test

It checks whether IPv4 and IPv6 each work between this device and our test servers, right now.

Open the IPv6 test

The difference in one picture

An IP address is how data finds your device on the internet. IPv4 is the old kind, and IPv6 the new one. Both do the same job.

  1. IPv4: your whole home shares one public address. Many providers even share one address between several homes.
  2. Inside the home, devices get private addresses. The router translates between them and the public one (this is called NAT).
  3. IPv6: every device gets its own public address. There are enough for all of them.
IPv4 IPv6
Looks like 203.0.113.5 2001:db8:85a3::7334
Size 32 bits: about 4.3 billion addresses 128 bits: more than enough for every device
Unused addresses Central pool ran out in 2011, North America’s in 2015 Plenty
Sharing Homes share one, sometimes several homes share one Every device has its own
Website support Almost every public website Websites that support IPv6. Most big sites have both, so you rarely notice

When providers share one IPv4 address between many homes, it’s called carrier-grade NAT (RFC 6888). It saves addresses, but it can get in the way of games and calls. IPv6 doesn’t need it.

Google users who reached Google over IPv6 on 3 Nov 2026
47 %
The same figure in the US (Google)
55 %
All possible IPv4 addresses. The central pool of unused ones ran out in 2011
4.3 billion

Is IPv6 faster than IPv4?

Usually about the same. Meta said in 2015 that Facebook could load 10 to 15% faster over IPv6. But Google notes that in some regions IPv6 still has reliability or delay problems. So don’t expect a speed boost.

Turning IPv6 off doesn’t make things faster either. Browsers usually try IPv6 first, and try IPv4 after a short delay if IPv6 is slow to answer. The standard suggests about 250 milliseconds (RFC 8305). They use whichever connection succeeds first.

Is your internet slow? IPv6 is rarely the cause. See why is my internet so slow.

IPv6 for games and consoles

  • Xbox: Microsoft recommends turning IPv6 on in your network. It avoids the address sharing (NAT) that can get in the way of multiplayer games and chat. On the Xbox, open Profile & system Settings General Network settings. It shows “IPv4 & IPv6” when both work.
  • PlayStation 5: it works with IPv6, but not on a network with IPv6 only. Keep IPv4 on in the router.

NAT type still strict? See how to change your NAT type.

How to turn IPv6 on

At home, IPv6 is a router setting. Phones and computers use it by themselves once the router has it.

  1. Open your router’s app, or its settings page in a browser, and sign in. The address and password are often on the router’s label. The address is often 192.168.1.1 or 192.168.0.1.
  2. Find the IPv6 page. On TP-Link it’s under Advanced, IPv6. On ASUS it’s Advanced Settings, IPv6. On Linksys it’s under Connectivity, Internet Settings, IPv6.
  3. Choose the type your provider tells you to use. It’s often an automatic one, such as Auto, Native or Dynamic IP. Not sure? Ask your provider first.
  4. Save, then restart the router.
  5. Run the IPv6 test again.

No IPv6 page, or still no IPv6 after this? Ask your provider whether they offer it. Some need a newer router. On mobile data, IPv6 depends on your mobile provider, not on a setting in the phone.

When to turn IPv6 off

Only when the test says IPv6 is broken, and websites hang or load slowly. First try the fixes for broken IPv6: turn off any VPN, restart the router, update its software.

Router

This turns it off for every device at home. First run the test on a second device: if IPv6 is broken there too, the problem is the router or the provider.

  1. Open the router’s IPv6 page, as in how to turn IPv6 on.
  2. Turn IPv6 off, or set the connection type to Disabled. Save, and restart the router.
  3. Open the websites that hung. If nothing got better, turn IPv6 back on.
  4. Tell your provider IPv6 doesn’t work, and show them the test result.

Windows

  1. Press Windows + R, type ncpa.cpl and press Enter.
  2. Right-click your Wi-Fi or Ethernet connection and choose Properties.
  3. Untick Internet Protocol Version 6 (TCP/IPv6) and press OK.

To undo it, tick the box again. Microsoft offers a gentler option for advanced users: make Windows prefer IPv4, without turning IPv6 off. Its IPv6 guide has the steps.

Mac

  1. Open Apple menu System Settings Network.
  2. Click your connection (Wi-Fi or Ethernet), then Details, then TCP/IP.
  3. Set Configure IPv6 to Link-local only and click OK.

To undo it, set Configure IPv6 back to Automatically.

iPhone and iPad

The iPhone and iPad have no setting for IPv6. On Wi-Fi, turn it off in the router instead. On mobile data, ask your mobile provider.

Android

On Wi-Fi, turn it off in the router. Android has no Wi-Fi setting for it.

On mobile data, some phones let you change the APN protocol to IPv4. Look in the mobile network settings, under Access point names. The exact names and places differ by phone. Change it only if your mobile provider tells you to.

Questions people ask

Do I need IPv6?

Not yet. Almost every website still works over IPv4. IPv6 can help games and calls, because it avoids address sharing. If your provider offers it, turn it on.

Should I enable IPv6 on my router?

Yes, if your provider supports it. Run the IPv6 test afterwards. If it scores 10/10, leave it on.

Is IPv6 less safe than IPv4?

Not by itself. Without address sharing, each device has its own public address, so the router’s firewall does the protecting. Look for an IPv6 firewall setting in your router and keep it on.

Will turning off IPv6 speed up my internet?

Only if IPv6 is broken. When it works, browsers already pick whichever kind connects faster. Test first, then decide.

What is my IPv6 address?

Run the IPv6 test. It shows your public IPv4 and IPv6 addresses. Many devices change the second half of their IPv6 address often, for privacy.