Short answer
Screen tearing is a straight line across the picture, with the part above it shifted sideways. It happens when your graphics card sends a new frame while the screen is still drawing the last one. Turn on G-Sync or FreeSync if your screen has it. If not, turn on V-Sync in the game.
This is what a tear looks like. It shows most when the picture moves sideways fast, for example when you turn in a game.
- The top part still shows the older frame.
- The tear: where the newer frame started, partway down the screen.
- The bottom part already shows the newer frame.
Step 1: check your screen’s refresh rate
Test it now
Refresh rate test
It measures how often your browser draws, which shows whether the screen runs at its full rate, but it can’t show tearing or confirm that G-Sync or FreeSync works.
If the result is lower than your screen can do, fix that first: see your screen runs below its rate.
What causes screen tearing
Your screen draws each picture from top to bottom, a fixed number of times a second. Your graphics card finishes frames whenever it can. If a new frame arrives halfway down, the screen draws the rest from the new frame. The two parts don’t line up, and you see a tear.
- No sync: a frame arrives in the middle of a refresh, so it tears (orange lines).
- V-Sync: each frame waits for the next refresh (orange). No tears, but a short wait.
- Variable refresh rate (G-Sync, FreeSync): the screen starts a refresh when the frame is ready. No tears and no wait.
Tearing shows most when the game makes more frames than your screen draws, or a changing number of them.
Does the picture freeze for a moment instead? That’s a stutter, not a tear: see game lag or stutter.
Fix 1: turn on variable refresh rate
With variable refresh rate (VRR), the screen changes its refresh rate to match the game’s frame rate. NVIDIA calls it G-SYNC and AMD calls it FreeSync. Monitors often say Adaptive Sync, and TVs and consoles use HDMI 2.1 VRR. Your screen and your graphics card both need to support it. A computer on a TV has its own steps.
NVIDIA
- Turn on Adaptive Sync or FreeSync in the monitor’s own menu, if it has the setting.
- Open the NVIDIA app and go to System Displays.
- Turn on G-SYNC for your monitor.
NVIDIA says G-SYNC with V-Sync on, plus NVIDIA Reflex in the game, keeps the frame rate just under the refresh rate. That stops tears with little delay.
AMD
- Turn on FreeSync in the monitor’s own menu, if it has the setting.
- Open AMD Software: Adrenalin Edition and search for Display.
- Under the display, check that AMD FreeSync is on. It is on by default on screens that support it.
Some monitor picture modes turn FreeSync off. If AMD Software doesn’t offer it, set the monitor back to its standard mode.
Windows
Windows 11 can give older games in a window the same VRR as full screen games. Open Settings System Display Graphics, then Default settings, and turn on Optimizations for windowed games. Then restart the game.
Dynamic refresh rate, under Settings System Display Advanced display, is a different setting: it saves battery on laptops. Microsoft warns it can limit the top refresh rate in some games.
Mac
Connect the monitor with DisplayPort, through a Thunderbolt or USB-C port (Apple’s Adaptive Sync works over DisplayPort). Then open System Settings Displays, choose your monitor and, under Refresh rate, choose Variable. It shows on Apple silicon Macs and some Intel Macs from 2019 and 2020, with macOS Monterey or later, for screens with Adaptive Sync. MacBook Pro screens show ProMotion.
Apple warns it can cause flicker or stutter outside games and videos.
PS5
Open Settings Screen and Video Video Output and set VRR to Automatic. It needs a TV or monitor with HDMI 2.1 VRR. Apply to Unsupported Games tries VRR in games without it.
Xbox
Open Settings General TV and display options and find the VRR setting. Choose Gaming only or Always on. Your TV must support VRR.
Then play the game again. Turning round fast is the best way to spot a tear.
Fix 2: turn on V-Sync
No VRR? Turn on V-Sync (also called vertical sync) in the game’s graphics settings. The game then waits for the screen before it shows a new frame, so nothing tears.
Variable refresh rate
Best, if your screen has it
No tears and very little delay. The game must stay inside the screen’s VRR range.
V-Sync on
Any screen
No tears. Frames wait for the screen, which adds a little delay. If the game can’t keep up, it can stutter.
V-Sync off
Lowest delay
Frames show as soon as they are ready, so tears come back. NVIDIA describes this as a choice: less delay if you accept tearing.
Check that the screen runs at its full rate
A 144 Hz screen stuck at 60 Hz draws fewer pictures, so a fast game tears more. Run the refresh rate test. If it shows less than your screen can do:
- Pick the highest rate in your display settings.
- Use DisplayPort or a newer HDMI cable, plugged into the graphics card, not the motherboard.
The refresh rate test has the full steps for each cause. To see what different frame rates look like, use the FPS test.
On a gaming laptop
Many gaming laptops have two graphics chips: one built into the processor and a stronger one for games.
- Use V-Sync in the game. NVIDIA says laptops with this setup don’t support V-Sync from the NVIDIA Control Panel.
- Check the display mode. On laptops that have it, the NVIDIA app shows Advanced Optimus under System Display. G-SYNC settings show when the NVIDIA chip drives the screen.
- Update the graphics driver from the laptop maker’s website. Intel gives this as the first step for tearing on laptops.
- Plug in the charger. On battery, laptops often lower the refresh rate and the game’s frame rate.
Tears in videos or on the desktop
Windows and macOS normally draw the desktop and browser in step with the screen, so tears there are less common. Intel suggests these steps:
- Update the graphics driver. On a laptop, use the laptop maker’s driver first.
- Set the screen to its native resolution and refresh rate.
- Try another cable or port.
Some people see diagonal tears, mostly on laptops with NVIDIA graphics in games running in a window. Try the game in full screen and update the driver.
Questions people ask
Does screen tearing damage my monitor?
No. Tearing comes from the timing of the frames, not from a fault in the screen. It goes away as soon as the frames and refreshes line up.
Does V-Sync add input lag?
Yes, a little. The game waits for the screen before it shows each frame. NVIDIA calls this back pressure from the display. G-Sync or FreeSync avoid most of that wait.
What is the difference between G-Sync and FreeSync?
Both make the screen follow the game’s frame rate. G-Sync is NVIDIA’s name and works with NVIDIA cards. Some G-Sync monitors have an NVIDIA chip inside. FreeSync is AMD’s name. Many Adaptive Sync monitors work with both: NVIDIA calls those G-SYNC Compatible.
Why does my 144 Hz monitor tear at 200 FPS?
The game makes more frames than the screen can draw, so new frames often arrive mid-refresh. Turn on V-Sync. With G-Sync or FreeSync, also set a frame limit in the game a little below 144, so it stays inside the VRR range.
Is there a screen tearing test?
Not a reliable one in a browser. Browsers normally wait for the screen before they draw, so a web page rarely tears. Our tearing demo shows real moving bars next to a drawn tear, so you know what to look for. Then turn round quickly in a fast game to check. The refresh rate test shows whether the screen runs at its full rate.