Used phone checklist

Test a used phone before you buy it, one step at a time, on the phone itself.

The camera, microphone and location stay on this phone. We don't record or upload them.

Press Start the check. You can skip any step and come back to it.

Sixteen short steps test a used phone or tablet before you pay for it. Run them on the phone itself, in its browser. It takes about 20 to 30 minutes, and you can skip any step.

What you check:

  1. Screen and buttons: Dead pixels, Burn-in and marks, Touch screen, Buttons
  2. Sound: Speaker, Earpiece and calls, Microphone
  3. Cameras: Front camera, Back camera
  4. Sensors: Vibration, Motion sensors, Location
  5. On the phone and in its settings: Body and parts, Battery health, Locks and IMEI
  6. Your report: Details for your report

Bring or ask for:

  • Open this page on the phone you want to buy, in Safari or Chrome.
  • Your own SIM card, to see that it works with your network (not needed for a phone that uses eSIM only).
  • A charger and cable that fit the phone.
  • A SIM pin or a paper clip, to open the SIM tray.
  • Wi-Fi or mobile data for this page. Your own phone’s hotspot works.
  • The box or receipt, to compare the IMEI number.

Tip: if the seller agrees, erase the phone first and go through setup with Wi-Fi to the Home Screen. If it never asks for anyone else’s account or password, it has no account lock.

Quick start

  1. Open this page on the phone, then press Start the check.
  2. Do each step, then choose what you saw, heard or felt.
  3. Share, copy or print the report for you and the seller.

How to read your results

Your report starts with one of four words.

What you see What it means
Problem found Something doesn’t work: a dead spot on the screen, a broken button or camera, no sound, a crack, or a lock. Ask for a lower price that covers the repair, or don’t buy it. For a lock, don’t pay until the seller removes it.
Needs attention Something worth a second look: a worn battery, a quiet speaker, a repair with an unknown part, a carrier lock. It may be normal wear, or worth a lower price.
Not fully tested You skipped a step, or couldn’t check something. A step you skip can’t find anything.
Passed You found no problems in the steps you did. That is a good sign, not proof that the phone is perfect.

Each step adds one line to the report: what you saw, heard or read. The report also lists the phone’s details if you typed them, what this check can’t tell you, and what to do next. Share or Copy it to your own phone, Download it, or Print it. On paper, it has lines for you and the seller to sign.

Step What a problem looks like
Dead pixels A dot that stays dark, bright or one colour on every colour.
Burn-in and marks A faint ghost of the keyboard or the status bar on grey, or patches and a tint.
Touch screen Squares that stay blank, often along one edge or in one band.
Speaker and earpiece Crackles, buzzing, very quiet sound, or none.
Cameras A black, blurry or spotty picture.
Motion sensors A sensor that never answers, so the screen doesn’t turn.
Battery health Below 80 %, Service, Weak or Reduced.
Locks and IMEI The seller’s account is still on, the phone is managed by a company, or the IMEI doesn’t match.

What to check when buying a used iPhone

What Where Good
Activation Lock Settings: the seller’s name must not show at the top. Signed out, Find My off
Battery health Settings → Battery → Battery Health (iPhone 14 and older: Battery Health & Charging). iPhone 15 and later show the cycle count there too. 80 % or more
Repairs Settings → General → About → Parts and Service History (only after a repair). No Unknown part
Carrier lock Settings → General → About → Carrier Lock. No SIM restrictions
Management Settings → General → VPN & Device Management. No profile
IMEI Dial *#06#, or Settings → General → About. One IMEI matches the box (phones with two SIMs show two)
Water Shine a light into the SIM tray slot. White or silver, not red

Many newer iPhones have no SIM tray and use eSIM only: iPhone 14 and later bought in the US, iPhone 17 and later bought in Canada, Mexico, Japan or the Gulf states, and every iPhone Air. Check the signal with the seller’s eSIM, and look at Carrier Lock. Add your own eSIM only after you have paid and the phone is erased.

Check iPhone battery health

  1. Open Settings, then tap Battery.
  2. Tap Battery Health. On iPhone 14 and earlier, it is called Battery Health & Charging.
  3. Read Maximum Capacity: how much charge the battery holds compared with when it was new. iPhone 15 and later also show the cycle count there.

What Apple says the numbers mean:

What you see What it means
80 % or more Normal wear. Apple designs batteries to keep 80 % of their capacity after 500 full charges (iPhone 14 and earlier) or 1,000 full charges (iPhone 15 models), in ideal conditions. A new iPhone can show a little under 100 %.
Service next to Battery Health Apple suggests a new battery, to get full performance and capacity back.
“Your battery’s health is significantly degraded” Not a safety problem: you can still use it. A new battery gets full performance and capacity back.

Buying a phone below 80 %? Count the cost of a new battery in the price.

Sources: Apple’s iPhone battery and performance and If the battery in your iPhone drains too quickly.

What to check on a used Android phone (Samsung, Pixel)

What Where Good
Google account Settings → Passwords, passkeys and accounts (older phones: Passwords and accounts or Accounts). The seller’s account removed
Samsung account Settings → Accounts and backup → Manage accounts. Removed
Battery health Pixel 8a and later: Settings → Battery → Battery health. Samsung: Samsung Members → Support → Phone diagnostics → Battery status. Normal
IMEI Dial *#06#, or Settings → About phone. One IMEI matches the box (phones with two SIMs show two)
Carrier lock Put in your own SIM from another network. It finds your network

Many other Android phones don’t show battery health at all. Then choose Couldn’t check, and ask the seller.

Buying a used iPad or tablet

The same steps work on a tablet. iPads have no vibration motor and no earpiece: the vibration step skips the buzz on an iPad, and the earpiece step has an answer for a tablet. Only newer iPads show Battery Health in Settings (iPad Pro with M4 or later, iPad Air with M2 or later, iPad mini (A17 Pro) and iPad (A16) or later). Wi-Fi iPads have a serial number instead of an IMEI, so the lost-or-stolen check doesn’t apply.

Tip: if the seller agrees, erase the phone first and go through setup with Wi-Fi to the Home Screen. A phone that never asks for anyone else’s account or password has no account lock. Then run the checklist.

If something’s wrong

These are the most common problems, most likely first.

Part of the screen doesn’t respond to touch

Take off any case and screen protector, clean the screen, and paint it again. Squares that still stay blank mean a screen repair. The touch screen test also watches for ghost touches.

No sound from the speaker

Check that no Bluetooth headphones or speakers are connected. Turn the volume up with the buttons. On iPhone, turn off Silent mode. Then play the sound again. Crackles or no sound at all mean the speaker needs a repair. The sound test has more sounds.

The camera or microphone doesn’t work

Your browser asks first: choose Allow. If you chose Block before, the step shows how to allow it again. Another app using the camera, such as a video call, can block it too: close it and press Try again.

The phone doesn’t buzz

iPhone browsers can’t make the phone buzz, so on iPhone the step uses a small tick and the Settings app. On Android, turn off Silent and Do Not Disturb, and check that vibration is on in Settings. The vibration test has more patterns.

The motion sensors don’t answer

On iPhone, tap Allow when Safari asks for motion access. If you chose Don’t Allow, close the tab and open the page again. On Android, Chrome can block motion sensors in its site settings. A phone that still shows nothing may have a broken sensor. The gyroscope test shows each sensor live.

No position is found

Turn on Location in the phone’s settings and allow it for the browser. Go near a window or outside. Indoors, phones often find only a rough position from Wi-Fi.

The seller can’t sign out of their account

On iPhone, Stolen Device Protection can make the seller wait an hour before signing out when they are away from home. Wait, or meet again. Don’t pay for a phone that is still signed in to someone else’s account: it may be locked to them, or stolen.

I closed the page by mistake

Open it again in the same tab, or press reload. Your answers so far are kept in this tab. To start afresh, press Start over.

How this test works

The check takes you through sixteen steps, one at a time, on the phone itself. Most steps use one of our tests, in a shorter form.

  1. Screen: colours from the dead pixel test, and grey screens for burn-in from the backlight bleed test.
  2. Touch: the touch screen test’s paint grid and finger count.
  3. Sound: the sound test’s test sound and sweep, and the microphone test. The earpiece is tested with a call, because web pages can’t play through it.
  4. Cameras: the webcam test, on the front and the back camera. Where the browser can (Chrome on Android), it also turns on the flash.
  5. Sensors: the vibration test, the gyroscope test and the GPS test.
  6. Buttons, body, battery and locks: checklists you tick, with the steps to find each item in the phone’s settings.

A browser can’t see the screen or hear the speaker, so you tell us what you saw or heard. It also can’t read the battery, the storage or the locks, so the report says those came from the phone’s settings. Where the browser can measure, it does: the touch grid, the microphone level, the camera’s picture, the sensors and the position’s accuracy. Your position is never saved: only how accurate it was.

Any step can be skipped, and you can go back to change an answer. Skipping a step makes the report “Not fully tested”, never “Passed”. The phone details are optional.

What it can’t check

  • Battery health: we show what the phone says, we don’t measure it.
  • Storage health, and whether the storage is wearing out.
  • Whether Activation Lock or a Google lock is really off. Only setup after an erase shows that.
  • Whether a carrier lock is really off. Only a SIM from another network shows that.
  • Whether the phone is on a lost-or-stolen blocklist.
  • Hidden damage from water, and parts we can’t see.
  • Faults that appear later, such as a screen that fails when warm.

Your answers and your report stay in this browser. We don’t upload them.

Questions and answers

What should I check when buying a used iPhone?

Check what fails most and costs most to fix: the screen (dead pixels, burn-in, touch), the buttons, the speaker, the earpiece in a call, the microphone, both cameras, Face ID or Touch ID, and the charging port. Then look in Settings: Battery → Battery Health for the maximum capacity, General → About for Parts and Service History and Carrier Lock. Check its age too: see how old an iPhone is and how long iPhones last.

Most important of all: the seller's Apple Account must be signed out and Find My turned off. If not, the iPhone stays locked to them (Activation Lock), even after a reset. The checklist takes you through all of this in about 20 to 30 minutes. Bought it from a shop? Test it before the return window closes: see new device return window.

How do I check a used Android or Samsung phone?

The same checklist works on Android. For the battery, Pixel 8a and later show Settings → Battery → Battery health; Samsung phones show it in the Samsung Members app → Support → Phone diagnostics → Battery status.

The seller must remove their Google account (and their Samsung account on a Samsung) before the sale. Otherwise the phone asks for their password after a reset. This is called Factory Reset Protection.

How can I tell if a used phone is stolen?

Dial *#06# to see the IMEI. It must match the box and the listing. Then type it into a free lost-or-stolen check, such as stolenphonechecker.org in the US or swappa.com/imei. In the UK, CheckMEND costs a small fee.

Be careful if the seller can't sign out of their account, the phone is managed by a company, the IMEI doesn't match, or there is no box or receipt. A blocklist check doesn't show account locks, so check those on the phone too.

On an iPad, the serial number (and the IMEI on cellular models) is in Settings → General → About. A Wi-Fi iPad has no IMEI, so ask for the receipt, and have the seller sign out of their Apple Account and erase it in front of you.

How do I know if a phone is unlocked (works on any network)?

On iPhone, open Settings → General → About → Carrier Lock. No SIM restrictions means it works with any network. On Android, put in your own SIM card from another network. If the phone says the SIM isn't supported or asks for an unlock code, it is locked to one network. Online checks can't tell reliably. Our guide check if an iPhone is unlocked shows each way. To get it unlocked, see network locked SIM card inserted.

An iPad with Wi-Fi only has no SIM, so it can't be locked to a network. An unlocked Wi-Fi + Cellular iPad works with a SIM or eSIM from any network; if it came from a phone company, try a SIM from another network. "Unlocked" doesn't mean free of Activation Lock: that lock belongs to the seller's Apple Account, and only they can remove it.

Can this page check battery health?

No. Phones don't share their battery health with web pages. The battery step shows where the phone's own settings show it, for iPhone, Android, Samsung and iPad. You type what you saw, and the report says it came from the phone, not from us.

I'm selling my phone. What should I do before I sell it?

Run this checklist on your phone and share the report with buyers: it shows what you tested and what you didn't. Then, when you sell: back up your phone, sign out of your Apple Account or remove your Google and Samsung accounts, turn off Find My, and erase the phone (Settings → General → Transfer or Reset iPhone → Erase All Content and Settings, or Factory data reset on Android).

Erase it in front of the buyer if you can, and let them go through setup with Wi-Fi. If it never asks for your account, that shows them it is free of your accounts.

Giving an iPad or phone to a family member works the same way: sign out, erase it, and the new owner sets it up with their own Apple Account or Google account.

For every step in order, including sign-in codes, chats, earbuds and the SIM, see before you sell or give away a phone.

Can I run this check on a computer?

Open it on the phone you are checking. A computer can't test the phone's screen, speaker, cameras or sensors. On a computer, the page shows its address to type into the phone's browser. You can read the steps on a computer first to see what to bring.

Are my answers saved?

Your answers stay in this browser tab until you close it, so a reload or a phone call in the middle doesn't lose them. Your finished report is saved in this browser on this phone. We don't upload them. Erasing the phone deletes them, so share the report to your own phone or take a photo first.

Guides for this test