Short answer

Your eyes have no frame rate, so there is no single FPS limit. In studies, people saw smoother motion at 120 FPS than at 60, and quality kept rising up to the highest rate tested. Above about 100 FPS each step looks smaller. You can only see it if your screen runs that fast.

Where a flickering light starts to look steady (Mankowska 2021)
50–90 Hz
The highest rate tested in a 2020 study, and motion still looked better (Denes)
165 Hz
Where game scores stopped rising in a test up to 500 FPS (Tokey 2026)
90 FPS
Flicker some people still noticed at sharp edges (Davis 2015)
500 Hz

FPS means frames per second: how many new pictures you see each second. The refresh rate, in hertz (Hz), is how many times a second your screen draws a picture.

See the difference yourself

Test it now

FPS test

On a screen of 120 Hz or more, the 120 FPS block glides while the 60 FPS block steps; on a 60 Hz screen both look the same.

Compare 60 and 120 FPS

Not sure how fast your screen is? Check it first with the refresh rate test.

Why there is no single number

A camera takes separate pictures. Your eyes don’t: they have no shutter and no fixed frame rate. Researchers still debate whether the brain works in short cycles (VanRullen and Koch, 2003). But no study has found a frame rate for vision. So the answer depends on what you look at.

What you look at What studies found
A flickering light It looks steady above about 50 to 90 Hz (Mankowska et al., 2021). Brighter flicker, and flicker at the edge of your view, is easier to see (Tyler and Hamer, 1990).
Flicker at a sharp edge Most people still noticed it above 500 Hz, as a trail when their eyes moved (Davis et al., 2015). That is flicker, not 500 frames a second.
Motion on a screen Motion looked better at every step up to 165 Hz. The gain slowed down above 100 Hz (Denes et al., 2020). An earlier study found picture quality kept improving up to about 240 FPS (Kuroki et al., 2007).
A picture shown for a moment People could tell if a picture showed a named scene, such as “smiling couple”, even at 13 milliseconds each (Potter et al., 2014). A later study couldn’t repeat this, even at 27 milliseconds (Maguire and Howe, 2016). It’s about spotting a picture, not about smooth motion.

Why 120 FPS looks smoother than 60

When your eyes follow something on a screen, each picture stands still for a moment, then jumps. More pictures a second means smaller jumps.

  1. 30 FPS: 2 big jumps.
  2. 60 FPS: 4 jumps.
  3. 120 FPS: 8 jumps, half as long as at 60 FPS.
  4. 240 FPS: 16 small steps.

The same movement in one fifteenth of a second. Each circle is one picture; the orange one is where the block is now.

Most screens also hold each picture for the whole frame. Your eyes keep moving while it stands still, so its edges smear. The smear is the speed divided by the frame rate (Denes et al., 2020). It halves when both the frame rate and the screen’s refresh rate double. A 120 Hz screen that repeats each picture of a 60 FPS game doesn’t halve it.

For example, a block that crosses a 1,920-pixel screen in one second jumps:

Frame rate Each jump
60 FPS 32 pixels
120 FPS 16 pixels
240 FPS 8 pixels

That’s why the step from 60 to 120 is easy to see. From 144 to 240 the jumps are already small, so the change is smaller.

Does a higher frame rate make you play better?

It helps, up to a point. Studies of shooting games found:

  • Below 60 FPS, players aim much worse. Shooting suffered badly at low frame rates; moving round the map suffered less (Claypool and Claypool, 2007).
  • Scores stopped rising at about 90 FPS. In a test of 44 players from 7 to 500 FPS, score and accuracy levelled out after about 90 FPS. But the players rated the game smoother at every step, up to 500 FPS (Tokey et al., 2026).
  • Delay matters more than the rate. With delay kept apart, 30 milliseconds less delay helped aiming more than refresh rates above 60 Hz (Spjut et al., 2019).

A faster screen usually lowers the delay too, which is part of why it feels better.

Myths you can drop

You may have heard What the evidence says
“The eye can only see 30 FPS” or “60 FPS” Wrong. People see a clear difference between 60 and 120 in motion, and smaller gains above that.
“Fighter pilots spotted a plane shown for 1/220 of a second” We found no published study behind it. It’s repeated online without a source.
“The eye sees 1,000 FPS” Mixes things up. Flicker at sharp edges can be noticed at 500 Hz or more. That’s not the same as seeing 500 separate pictures a second.

Check what your screen can show

  1. Open the refresh rate test and press Measure refresh rate. A 60 Hz screen can’t show more than 60 FPS.
  2. If it shows less than your screen can do, change the rate in your display settings. The refresh rate test explains how for Windows and Mac.
  3. Open the FPS test and follow the blocks. On a fast monitor, also try 144 vs 240 FPS.

Do you see a tear across the picture in games? That’s a different problem: see screen tearing. Does the game freeze or jump now and then? See game lag or stutter.

Questions people ask

Can the human eye see 240 FPS?

Yes, in the sense that motion at 240 FPS looks smoother than at 144. The step is smaller than from 60 to 120. One study found picture quality kept improving up to about 240 FPS. You need a 240 Hz screen to see it.

How many FPS can the human eye see?

There’s no fixed number, because eyes don’t see in frames. A flickering light looks steady above about 50 to 90 Hz. Moving pictures keep looking better well past 100 FPS. In one game study, players rated motion smoother all the way to 500 FPS.

Do older people see fewer FPS?

Sensitivity to flicker drops slowly with age. In a study of 130 people aged 9 to 86, it fell steadily across the whole age range (Lachenmayr et al., 1994).

Is 60 FPS enough?

For films, TV and office work, yes. For games and fast scrolling, 120 FPS looks clearly smoother, and many phones and laptops now have 120 Hz screens. Compare 30 and 60 FPS to see how much the first step matters.